87.080 墨水、油墨 标准查询与下载

ASTM D6531-00(2019) 用仪器测量法测定水墨系统相对着色强度的标准试验方法

1.1 This test method covers the procedure for determining the relative tinting strength of waterbased ink systems using a computer-aided spectrophotometer. 1.2 This test method is applicable to waterbased printing inks and bases to be used primarily in flexographic and gravure printing applications. 1.3 This test method applies only to single, non-fluorescent pigmented colors and black ink systems for which there is a reference standard containing a pigment of the identical color index name and number. 1.4 The procedure in this test method specifies placing tinted samples in a cuvette for spectrophotometric measurements. The use of thick wet drawdowns as in Test Methods D2066 are inappropriate due to severe floating problems with aqueous systems. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

QB/T 5345-2018 油墨摩擦牢度的检验方法

Testing method for rubbing fastness of ink

QB/T 5344-2018 液体油墨耐蒸煮性能的检验方法

Testing method for retort resistance of liquid ink

QB/T 1020-2018 纸和纸板印刷适性试验用标准油墨

本标准规定了纸和纸板印刷适性用标准油墨的分类、要求、试验方法、检验规则、标志、使用说明、包装、运输和贮存等。 本标准适用于油墨吸收性、印刷表面强度及印刷光泽度用的标准油墨。

Standard inks for testing printability of paper and board

T/ZZB 0606-2018 凹印耐蒸煮塑料薄膜复合油墨

本标准规定了凹印耐蒸煮塑料薄膜复合油墨的基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。 本标准适用于在凹版轮转印刷机上使用的凹印耐蒸煮塑料薄膜复合油墨。

Gravure lamination ink for laminated retort plastic film

ASTM F2252/F2252M-13(2018) 使用胶带评估柔性包装材料的油墨或涂料粘附性的标准实践

1.1 This practice describes a means of evaluating ink or coating adhesion to flexible packaging materials. This practice is intended for use on flexible packaging materials whose surfaces are not damaged by the application and removal of tape. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape

T/ZZB 0451-2018 聚乙烯吡咯烷酮（PVP）固体胶

本标准规定了聚乙烯吡咯烷酮（PVP）固体胶的术语和定义、基本要求、技术要求、试验方法、检验规则及标志、包装、运输、贮存、质量承诺的要求。 本标准适用于办公、学生、家庭等用于纸张粘贴的以PVP为主要胶黏剂成分的固体胶。

Polyvinylpyrrolidone(PVP) glue stick

QB/T 5223-2018 圆珠笔用低黏度油墨

本标准规定了圆珠笔用低黏度油墨的术语和定义、分类、要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于圆珠笔用低黏度油墨(以下简称“油墨”)。

Low viscosity inks for ball point pen

ASTM F2250-13(2018) 印刷油墨和涂料在柔性包装材料上的耐化学性评估标准实践

1.1 This practice describes the procedure for evaluating the ability of an ink, overprint varnish or coating to withstand chemical exposure. Typical chemicals, which may come in contact with the package, include water, alcohol, acid, etc. The specific chemical and method of choice as well as determination of measurement outcome are left to users to agree upon in joint discussion. Suggestions for ways to measure and collect information are offered in the various methods listed in this practice. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials

T/CWIA 1001-2017 油性记号笔中墨水的有害物质限量

本标准规定了油性记号笔中墨水的术语和定义、要求、试验方法、检验规则及标志、包装、运输和贮存。

Oil-base ink marker——Limit of harmful substances of the inks

QB/T 5193-2017 全植物油胶印油墨

本标准规定了全植物油胶印油墨的术语和定义、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于纸张印刷使用的全植物油单张胶印油墨，不包括紫外线固化胶印油墨。

Pure vegetable oil offset ink

QB/T 5192-2017 广色域单张纸胶印油墨

本标准规定了广色域单张纸胶印四色油墨的术语和定义、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于在单、双或多色胶印机上使用的，在纸张等承印物上印刷图片及商标等广色域单张纸胶印油墨。

Wide color gamut sheet-fed offset printing ink

QB/T 5194-2017 无水胶印油墨

本标准规定了无水胶印油墨的术语和定义、分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于普通无水胶印油墨以及紫外光固化无水胶印油墨。

Waterless offset ink

BS ISO 12634:2017 图形技术 用旋转粘性仪测定糊状油墨和载体的粘性

1   Scope This document specifies the test procedure for determining the tack value of neat paste inks and vehicles which have low volatility and are unreactive under normal room conditions during the timespan required for testing. This document contains a basic description of Inkometer® 1 and Inkomat® 2 (Geometry A) and TackOscope® 3 and TackTester® 4 (Geometry B).

Graphic technology. Determination of tack of paste inks and vehicles by a rotary tackmeter

BS ISO 2846-1:2017 图形技术 用于四色印刷的印刷油墨组的颜色和透明度 单张纸和热固卷筒纸胶印平版印刷

Graphic technology. Colour and transparency of printing ink sets for four-colour printing. Sheet-fed and heat-set web offset lithographic printing

ISO 12634:2017 印刷技术.用旋转粘度计测定油墨和连结料的粘性

This document specifies the test procedure for determining the tack value of neat paste inks and vehicles which have low volatility and are unreactive under normal room conditions during the timespan required for testing. This document contains a basic description of Inkometer®1) and Inkomat®2) (Geometry A) and TackOscope®3) and TackTester®4) (Geometry B).

Graphic technology - Determination of tack of paste inks and vehicles by a rotary tackmeter

ISO 2846-1:2017 图形技术 - 四色印刷油墨印刷的颜色和透明度 - 第1部分:单张纸和热定型卷筒纸偏移平版印刷

This document specifies the colour and transparency characteristics that are to be met by each ink in a process colour ink set intended for proof and production printing using offset lithography. The specified printing conditions (which use a laboratory printability tester), the defined substrate and a method for testing to ensure conformance are also defined. Characteristics are specified for inks used for sheet-fed, heat-set web and radiation-curing processes. This document does not apply to fluorescent inks and it does not specify pigments (or spectral characteristics — except informatively) in order not to preclude developments which may enable different pigment combinations to be used advantageously while still achieving the colorimetric requirements specified in this document.

Graphic technology — Colour and transparency of printing ink sets for four-colour printing — Part 1: Sheet-fed and heat-set web offset lithographic printing

T/XAI 3-2017 凹版印刷油墨

1.范围 ；2.规范性引用文件；3.术语和定义；4.分类与标记；5.要求；6.试验方法；7.检验规则；8.标志 使用说明书 包装 运输 贮存。

Gravure printing ink

QB/T 2825-2017 柔性版水性油墨

Flexographic water-based ink

QB/T 2824-2017 胶印热固着轮转油墨

Offset heat set rotary ink