91.140 建筑物中的设施 标准查询与下载

CJ/T 468-2014 矢量变频供水设备

本标准规定了矢量变频供水设备的术语和定义,分类、标记和结构,设备使用条件,要求,试验方法,检验规则,标识、包装、运输和贮存。本标准适用于城镇、工业与民用建筑的生活和生产用水的矢量变频供水设备的设计制造和检验。

Water supply equipment with vector frequency conversion

CJ/T 466-2014 燃气输送用不锈钢管及双卡压式管件

本标准规定了燃气输送用不锈钢管(以下简称钢管)及双卡压式管件(以下简称管件)的术语和定义,标记,材料,规格和尺寸,要求,试验方法,检验规则,标识、包装、运输和贮存。本标准适用于温度为-20 ℃~60 ℃、公称尺寸为DN15~DN100、公称压力不大于0.4 MPa的建筑燃气输送用不锈钢管及双卡压式管件的设计、制造和检验。

Double-press extrusion stainless steel gas pipes and fittings

DB22/T 2191-2014 公共供水安全防范设施技术规范

Technical specifications for public water supply safety precautions

CJ/T 463-2014 薄壁不锈钢承插压合式管件

本标准规定了薄壁不锈钢承插压合式管件(以下简称管件)的术语和定义、分类和标记、结构和基本尺寸、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于输气压力不大于0.8 MPa户内燃气簿壁不锈钢承插压合式管件的设计、制造和检验。输水压力不大于3.0 MPa的建筑冷热水簿壁不锈钢承插压合式管件可参照执行。

Light gauge stainless steel for insert press-fittings

CJ/T 462-2014 直连式加压供水机组

本标准规定了直连式加压供水机组(以下简称机组)的术语和定义、分类和标记、材料、环境和工作条件、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于民用及工业建筑中生活或生产给水系统的直连式加压供水机组的设计、制造和检验。

Direct pressurized water supply units

CJ/T 258-2014 纤维增强无规共聚聚丙烯复合管

本标准规定了纤维增强无规共聚聚丙烯复合管的术语和定义、符号、缩略语、材料、使用条件级别、产品分类、管系列S值的选择、要求、试验方法、检验规则和标志、包装、运输和贮存。本标准适用于工业和民用建筑内的冷、热水和采暖管道系统的管材生产和检验。

Fiber reinforced polypropylene random copolymer composite pipe

CJ/T 461-2014 水处理用高密度聚乙烯悬浮载体填料

本标准规定了水处理用高密度聚乙烯悬浮载体填料的术语和定义、分类与型号、材料、要求、试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于水处理用高密度聚乙烯悬浮载体填料的生产、检测和验收。

High density polyethylene suspended carrier for water treatment

CJ/T 125-2014 燃气用钢骨架聚乙烯塑料复合管及管件

本标准规定了燃气用钢骨架聚乙烯塑料复合管(以下简称管材)及钢骨架聚乙烯塑料复合管件(以下简称管件)的术语和定义,原料,一般规定,要求,试验方法,检验规则,标识、包装、运输和贮存。本标准适用于工作温度为-20 ℃~40 ℃,最大工作压力不大于1.6 MPa,公称内径50 mm~600 mm的燃气用钢骨架聚乙烯塑料复合管及管件。

Steel framed polyethylene plastic pipes and fittings for supply of gaseous fuels

KS F 1800-1-2014(2019) 建筑能源管理系统第1部分:功能和数据处理程序

Building Energy Management System ㅡ Part 1 : Function and data processing procedure

KS F 1800-1-2014 建筑能源管理系统抋 第1部分：功能及数据处理流程

이 표준은 건물에너지관리시스템의 기능과 데이터 처리 절차에 대하여 규정한다

Building Energy Management System ㅡ Part 1 : Function and data processing procedure

CJ/T 454-2014 城镇供水水量计量仪表的配备和管理通则

本标准规定了城镇供水水量计量仪表(以下简称“水表”)的术语和定义、水表选择、水表配备、水表安装、水表检测和管理要求。本标准适用于城镇供水单位和用水单位水表的配备和管理。

General rule of equipment and management for water meter of water supply in city and town

CJ/T 257-2014 铝合金及不锈钢闸门

本标准规定了城镇给水排水用软密封铝合金及不锈钢材质闸门(以下简称闸门)的术语和定义、结构型式及基本参数、材料、要求、检验及试验方法、检验规则、标志、包装、运输和贮存等。本标准适用于公称尺寸200 mmX200 mm及以上,最大工作水压0.1 MPa的城镇给水排水闸门。

Aluminium alloy and stainless steel sluice gate

CJ/T 132-2014 家用燃气燃烧器具用自吸阀

本标准规定了家用燃气燃烧器具用自吸阀(以下简称自吸阀)的术语和定义、分类和分组、结构和材料、要求、试验方法、标识、安装和操作说明书、检验规则、包装、运输和贮存。本标准适用于最大工作压力不大于10 kPa,公称尺寸不大于DN32,工作电压不大于DC 6V,仅以电池驱动的,使用GB/T 13611规定的城镇燃气器具用自吸阀。

Automatic suction solenoid valves for gas burning appliances

CJ/T 450-2014 燃气燃烧器具气动式燃气与空气比例调节装置

本标准规定了燃气燃烧器和燃气燃烧器具用气动式燃气/空气比例调节装置(以下简称“比例调节装置”)的术语和定义、分类和分组、结构和材料、要求、试验方法、检验规则、标识、安装和操作说明书以及包装、运输和贮存。本标准适用于标明最大工作压力不大于50 kPa,公称尺寸不大于DN250,使用GB/T 13611规定的城镇燃气,由空气压力改变燃气压力且能够单独测试的比例调节装置。由燃气压力改变空气压力的比例调节装置可参考本标准执行。本标准不适用于机械联动的比例调节装置和电子控制的比例调节装置。

Pneumatic gas/air ratio adjustment devices for gas-burning appliances

CSA C873 SERIES-2014 建筑能耗估算方法

C873.0-14 - Building energy estimation methodology - Part 0 - Definitions and general requirements for the calculation of energy loads, energy consumption, and source energy for heating, cooling, ventilation, domestic hot water, and lighting in buildings Scope 1.1 This Standard specifies general requirements such as reference publications, definitions, abbreviations, symbols, and subscripts used in the other Standards in the CSA C873 Series. 1.2 This Standard is intended to be used in conjunction with the other Standards in the CSA C873 Series to form a complete Standard. 1.3 In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. ---------------------------------------------------------------------------------- C873.1-14 - Building energy estimation methodology - Part 1 - General balancing procedures, terms and definitions, zoning, and evaluation of energy types Scope 1.1 This Standard covers the procedures for calculating the energy loads, energy consumption, and source energy for heating, cooling, lighting, and the domestic hot-water supply of buildings. 1.2 This Standard describes the overall calculation procedure. ---------------------------------------------------------------------------------- C873.2-14 - Building energy estimation methodology - Part 2 - Energy loads for heating and cooling of building zones Scope 1.1 This document specifies methods of calculating the energy loads for heating and cooling of the section of the building being assessed. The calculations are based on a specific zone of the building defined according to its intended use. 1.2 This Standard describes procedures that are suitable for calculating the energy loads for heating of building zones which have only heating, as well as the energy loads for heating and cooling of building zones which are served by both heating and cooling systems. ---------------------------------------------------------------------------------- C873.3-14 - Building energy estimation methodology - Part 3 - Energy loads for conditioning air Scope This Standard describes a method that can be used to determine the energy loads for thermal air conditioning (useful energy), as well as the energy consumption for air transport in ventilation and air-conditioning systems (HVAC systems) that partly use external air. This Standard does not describe a method to determine the energy loads of ventilation systems and air-heating systems for residential buildings. The energy characteristic tables in Annex A of this Standard, used to calculate the energy loads for conditioning air, were developed for six locations representing NECB Climate Zones 4, 5, 6, 7A, 7B, and 8 and do not apply to other zones. ---------------------------------------------------------------------------------- C873.4-14 - Building energy estimation methodology - Part 4 - Energy consumption for lighting Scope 1.1 This Standard specifies a method of verifying the monthly and annual energy consumption for lighting in non-residential buildings. 1.2 This Standard provides a methodology for calculating the electrical energy consumption of the electrical lighting system, as well as accounting for daylighting. ---------------------------------------------------------------------------------- C873.5-14 - Building energy estimation methodology - Part 5 - Energy consumption for heating systems Scope 1.1 This Standard determines the energy consumption of the heating systems and their subsystems (control and emission, distribution, storage, and generation). 1.2 This Standard provides a methodology for calculating the energy consumption for heating provided to the air-handling system, zone coils, and absorption chillers. The auxiliary energy and the uncontrolled internal heat gains from the heating system are also calculated. ---------------------------------------------------------------------------------- C873.7-14 - Building energy estimation methodology - Part 7 - Energy consumption for air-handling and air-conditioning systems Scope 1.1 This Standard provides a method of calculating energy consumption for heating, ventilation, and air-conditioning systems. 1.2 This Standard specifies requirements for materials, quality of work, dimensions, sustained pressure, environmental stress cracking, and markings. ---------------------------------------------------------------------------------- C873.8-14 - Building energy estimation methodology - Part 8 - Energy consumption for domestic hot-water systems Scope 1.1 This Standard describes the calculation of energy consumption of domestic hot-water systems and their subsystems (control and emission, distribution, storage, and generation). 1.2 This Standard provides a methodology for calculating the energy consumption for domestic hot-water heating. The auxiliary energy and the uncontrolled internal heat gains from the domestic hot-water heating system are also calculated. ---------------------------------------------------------------------------------- C873.9-14 - Building energy estimation methodology - Part 9 - Energy consumption and source energy for combined heat and power plants Scope This Standard describes a calculation procedure to determine the energy consumption for heat generation in a process involving cogeneration or combined heat and power plants. ---------------------------------------------------------------------------------- C873.10-14 - Building energy estimation methodology - Part 10 - Boundary conditions of use - Climatic data Scope This Standard specifies the boundary conditions for non-residential buildings and provides reference climatic data for Canada.

Building energy estimation methodology

CJ/T 451-2014 商用燃气燃烧器具通用技术条件

本标准规定了商用燃气燃烧器具(以下简称燃具)的术语和定义,分类,结构和材料,要求,试验方法,检验规则,标识、警示和使用说明书,包装、运输和贮存。本标准适用于商用厨房等使用,以符合GB/T 13611规定的燃气为能源,安装在室内、燃烧产物机械排至室外的燃烧器具。

General technique conditions of commercial gas burning appliances

CJ/T 448-2014 城镇燃气加臭装置

本标准规定了城镇燃气加臭装置(以下简称加臭装置)的术语和定义,型号,结构、材料和部件,要求,试验方法,检验规则,标识、使用说明书、包装、运输和贮存。本标准适用于对管道燃气加注储存温度为-30 ℃~50 ℃、运动黏度为0.3 mm/s~50 mm/s的液体加臭剂的加臭装置。

Odorization unit for city gas

CJ/T 447-2014 管道燃气自闭阀

本标准规定了管道燃气自闭阀的术语和定义、分类及型号、结构与材料、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。本标准适用于使用介质符合GB/T 13611规定的城镇燃气,工作温度不超出- 10 ℃~40 ℃范围,安装在设计压力小于10 kPa的户内燃气管道上,公称尺寸不大于50 mm的管道燃气自闭阀。

Automatic shut-off valve for pipeline gas

CJ/T 180-2014 建筑用手动燃气阀门

本标准规定了建筑用手动燃气阀门(以下简称阀门)的分类及型号,材料、结构和连接尺寸,要求,试验方法,检验规则,标志、包装、运输和贮存。本标准适用于公称压力不大于1.6 MPa、公称尺寸不大于100 mm、工作温度不超出-20 ℃~60 ℃且其下限不低于燃气露点温度,安装在建筑物内外的非直埋燃气装置与设施上的手动燃气球阀和底部密封的旋塞阀。本标准所指燃气为符合GB/T 13611规定的燃气。

Manually operated gas valves for gas installations of buildings

DB34/T 2040-2014 压缩天然气（CNG）加气站运行与计量管理规范

本标准规定了工作压力不大于 25.0 MPa 的压缩天然气加气站运行与计量管理主要内容和要求。 本标准适用于工作压力不大于 25.0 MPa 的压缩天然气加气站。

Compressed natural gas (CNG) filling station operation and metering management specification