93.040 桥梁建筑 标准查询与下载
共找到 601 条与 桥梁建筑 相关的标准，共 41 页
本标准规定了悬索桥主缆平行钢丝索股的分类、结构、规格和型号、技术要求、试验方法、检验规则，以及标志、包装、运输和储存要求。 本标准适用于悬索桥用主缆平行钢丝索股的生产、检验和使用。
Main cable paralleled wire strands for suspension bridge
- ICS
- 93.040
- CCS
- P28
- 发布
- 2018-06-07
- 实施
- 2019-01-01
本标准规定了斜拉桥用热挤聚乙烯高强钢丝拉索的分类、产品结构、规格与型号、技术要求、试验方法、检验规则，以及标志、包装、运输和贮存要求。 本标准适用于斜拉桥用热挤聚乙烯高强钢丝拉索的生产、检验和使用。
Hot-extruded PE protection paralleled high strength wire cable for cable-stayed bridge
- ICS
- 93.040
- CCS
- P28
- 发布
- 2018-06-07
- 实施
- 2019-01-01
本标准规定了混凝土灌注桩用钢薄壁声测管的产品型号、尺寸和质量、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于混凝土灌注桩采用超声波法检测用的声测管。
Steel thin-walled sonic-testing tubes for concrete bored piles
- ICS
- 93.040
- CCS
- P28
- 发布
- 2015-05-15
- 实施
- 2015-08-01
GB/T31067—2014 桥梁防雷技术规范本标准规定「桥梁防雷设计、施下、防雷丁程质量检测与验收和维护与管理等内容。 本标准适用于新建、改建、扩建梁式桥、拱式桥、刚构桥、斜拉桥、悬索桥等钢结构或钢筋混凝土结构桥梁的防雷设计、施下、验收及防雷装置的维护与管理。 本标准不适用于木桥、污工桥、立交桥、人行夭桥、高架桥以及高速铁路桥防雷。 其他经评估存在雷电灾害风险的已建桥梁可参照本标准执行”
Technical code for protection of bridge against lightning
- ICS
- 93.040
- CCS
- P28
- 发布
- 2014-12-22
- 实施
- 2015-06-01
本标准规定了球型支座的产品规格、分类、技术要求、试验方法、检验规则以及标志、包装、储存、运输、安装和养护的要求。 本标准适用于桥梁工程中承载力为1500kN~60000kN的球型支座，其他工程所用的球型支座可参照使用。
Spherical bearings for bridges
- ICS
- 93.040
- CCS
- P28
- 发布
- 2009-03-31
- 实施
- 2009-11-01
本标准规定了斜拉桥用热挤聚乙烯高强钢丝拉索的规格型号、技术要求、检验规则、试验方法和标志、包装、储存及运输等通用技术条件。 本标准适用于斜拉桥。悬索桥，中、下承式拱桥及其他结构的索构件亦可参照使用。
Technical conditions for hot-extruding PE protection high strength wire cable of cable-stayed bridge
- ICS
- 93.040
- CCS
- R28
- 发布
- 2001-05-11
- 实施
- 2002-01-01
本标准规定了铁路桥梁跨度系列的尺寸。 本标准适用于标准轨距铁路简支式桥梁，其他式样桥梁亦应参照使用。
Railway bridge span series
- ICS
- 93.040
- CCS
- S13
- 发布
- 1994-07-19
- 实施
- 1995-04-01
前言 1 范围 2 规范性引用文件 3 术语和定义 4 基本要求 5 养护内容 6 养护方案
Technical specification for comprehensive utilization of industrial solid waste
- ICS
- 93.040
- CCS
- E481
- 发布
- 2024-05-31
- 实施
- 2024-05-31
Technical specification for welding of orthotropic steel bridge decks
- ICS
- 93.040
- CCS
- P 28
- 发布
- 2024-05-16
- 实施
- 2024-06-16
Specification for manufacturing long span steel trusses
- ICS
- 93.040
- CCS
- P 28
- 发布
- 2024-05-16
- 实施
- 2024-06-16
本文件规定了装配式钢结构减震支座的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于装配式钢结构减震支座的生产和检验。
Prefabricated steel structure shock-absorbing bearing
- ICS
- 93.040
- CCS
- E481
- 发布
- 2024-05-15
- 实施
- 2024-05-30
Standard Classification for Bridge Elements—UNIFORMAT II
- ICS
- 93.040
- CCS
- 发布
- 2024-05-01
- 实施
Technical specifications for construction of lower parts of prefabricated concrete bridges for ordinary highways
- ICS
- 93.040
- CCS
- Z 05
- 发布
- 2024-04-30
- 实施
- 2024-05-30
This document provides information to perform the design of the prestressed concrete box girder bridge for road that complies with the limitations established in 6.1. The rules of design as set forth in the document are simplifications of more elaborate requirements. Among several erection methods of box girder bridges, the provisions of this document are mainly applicable to full staging method (FSM). Designs and details for new road bridges address structural integrity by considering the following: — the use of continuity and redundancy to provide one or more alternate paths; — structural members and bearing seat widths that are resistant to damage or instability; and — external protection systems to minimize the effects of reasonably conceived severe loads.
Simplified design of prestressed concrete bridges — Part 2: Box-girder bridges
- ICS
- 93.040
- CCS
- 发布
- 2024-04-25
- 实施
This document provides information to perform the design of the prestressed concrete I-girder bridge for road that complies with the limitations established in 6.1. The rules of design set forth in this document are simplifications of more elaborate requirements. Designs and details for new road bridges address structural integrity by considering the following: — the use of continuity and redundancy to provide one or more alternate paths; — structural members and bearing seat widths that are resistant to damage or instability; and — external protection systems to minimize the effects of reasonably conceived severe loads.
Simplified design of prestressed concrete bridges — Part 1: I-girder bridges
- ICS
- 93.040
- CCS
- 发布
- 2024-04-25
- 实施
本文件规定了市政桥梁工程数字化建设的术语和定义、基本规定、数字化建造组织与策划、数字化建造平台、数字化设计及数字化施工内容。 本文件适用于市政桥梁工程的数字化建设。
Digital construction specifications for municipal bridge projects
- ICS
- 93.040
- CCS
- E481
- 发布
- 2024-04-18
- 实施
- 2024-04-25
《桥梁断柱整体顶升施工技术规程》规定了桥梁断柱整体顶升施工过程中的技术要求，主要内容包括：基本要求；桥梁断柱整体顶升施工工艺流程，施工准备（包含反力结构体系、临时支撑、限位结构体系和桥梁结构加固等施工技术要求），顶升系统安装与设备调试，断柱施工，试顶升和正式顶升，接柱和加固；施工控制。该标准为公路桥梁断柱整体顶升工程提供了全面、系统的技术指导，旨在提高工程质量，确保施工安全，推动行业技术进步。
Technical guide for pier cutting-off and bridge overall jacking-up construction
- ICS
- 93.040
- CCS
- E481
- 发布
- 2024-04-15
- 实施
- 2024-05-01
Design and Construction Guide for Highway Weathering Steel Bridges
- ICS
- 93.040
- CCS
- P 28
- 发布
- 2024-04-15
- 实施
- 2024-05-15
Maintenance Guide for Long and Large Bridges Part 7: Monitoring and Control Network Layout and Observation Technology
- ICS
- 93.040
- CCS
- P 28
- 发布
- 2024-04-15
- 实施
- 2024-05-15
本文件规定了铁路混凝土桥梁预应力智能张拉与压浆施工的基本规定、系统要求与功能、系统检验与校准、预应力筋智能张拉、管道智能压浆和质量检测。
Technical specification for intelligent post-tensioning and grouting construction of railway prestressed concrete bridge
- ICS
- 93.040
- CCS
- E481
- 发布
- 2024-04-07
- 实施
- 2024-04-15
