97.040.20 炉灶、工作台、烤箱和类似器具 标准查询与下载

ASTM F2092-24 对流炉煤气或电的标准规范

1.1 This specification covers forced air convection ovens for baking, roasting or rethermalizing which utilize gas or electrical heat sources, or both for cooking food in the commercial and institutional food service establishments. The units may have water and drain connections for adding moisture but do not have a dedicated steam only mode. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Convection Oven Gas or Electric

GSO IEC 60350-2:2024 家用电动烹饪器具 第2部分：炉灶 性能测量方法

IEC 60350-2:2017 defines methods for measuring the performance of electric hobs for household use. Appliances covered by this document can be built-in or designed to be placed on a work surface. The hob can also be a part of a cooking range. This document does not apply to portable appliances for cooking, grilling and similar functions (see IEC 61817). This document defines the main performance characteristics of hobs which are of interest to the user and specifies methods for measuring these characteristics. This document does not specify a classification or ranking for performance. This edition includes the following significant technical changes with respect to the previous edition: a) terms and definitions revised and new definitions added (see 3); b) following the new market trend, requirements related to so-called flexible and free induction zones - in this document named as cooking areas - are added; c) specification for standardized and alternative cookware is introduced (see 5.6); d) measurement procedure reflecting a household-like cooking process for measuring the energy consumption is introduced (see Clause 7 and Annex A); e) revision of measurement procedure for determining the accuracy of control (see Clause 8); f) new reproducible measurement procedure for assessing the heat distribution (see Clause 9); g) additional requirements (according to IEC 62301:2011) on how to measure low-power modes.

Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

24/30485933 DC BS EN IEC 60350-2/AMD2 修改件2 家用电动烹饪器具 第2部分：炉灶 性能测量方法

BS EN IEC 60350-2/AMD2 Amendment 2 - Household electric cooking appliances - Part 2: Hobs - Methods for measuring performance

T/CSTE 0545-2024 绿色（ 低碳 ）产品评价要求 家用集成灶

本文件规定了家用集成灶绿色（低碳）产品和和绿色（低碳）领跑产品的评价要求和评价方法。 本文件适用于使用城镇燃气的家用集成灶（单个燃烧器额定热负荷≤5.23 kW）及使用城镇燃气和电 能的家用气电两用集成灶（单个燃烧器额定热负荷≤5.23 kW、电的总额定输入功率≤5.00 kW）的产品评 价。

Technical specification for green and low carbon product assessment— Household integrated stove

BS EN IEC 60335-2-110:2021+A1:2023 家用和类似用途电器 安全 带插入式或接触式涂抹器的商用微波设备的特殊要求

Household and similar electrical appliances. Safety - Particular requirements for commercial microwave appliances with insertion or contacting applicators

T/GDBX 081-2023 吸油烟机蜗壳智能化制造技术规范

本文件规定了吸油烟机蜗壳智能化制造的术语和定义、技术要求和信息安全。 本文件适用于吸油烟机蜗壳智能化制造的企业。

Technical specification for intelligent manufacturing of volute for range hoods

23/30482708 DC BS EN 50733 专业用途的电动强制对流烤箱、蒸汽炊具和组合烤箱 测量性能的测试方法

BS EN 50733. Electric forced convection ovens, steam cookers and combination ovens professional use. Test methods for measuring the performance

T/CAS 777-2023 家用全嵌入式吸油烟机技术规范

本文件界定了家用全嵌入式吸油烟机的术语和定义，规定了家用全嵌入式吸油烟机的技术要求，描述了相关试验方法。 本文件适用于家用全嵌入式吸油烟机（以下简称吸油烟机）。

Technical specification of household fully built-in range hood

ISO/TR 19915:2023 清洁炉灶和清洁烹饪解决方案——社会影响评估指南

Clean cookstoves and clean cooking solutions — Guidelines for social impact assessment

T/QGCML 1449-2023 多功能家用电火锅

本文件规定了多功能家用电火锅（以下简称电火锅）的术语和定义、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本文件适用于单相额定电压不超过250 V，容积不超过5 L的多功能家用电火锅。

Multifunctional household electric hot pot

T/QGCML 1433-2023 不锈钢单斗水池

本文件规定了不锈钢单斗水池的术语定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于不锈钢单斗水池的生产和检验。

Stainless steel single bucket pool

T/DZJN 181-2023 《家用燃气燃烧器具 语音控制要求和测试方法》

本文件规定了使用语音控制的家用燃气燃烧器具（以下简称燃具）的术语和定义、语音控制的要求和测试方法。 本文件适用于家用的各种燃气热水器、采暖热水炉、燃气灶具、集成灶等。

Voice Control Requirements and Test Methods for Household Gas Burning Appliances

ISO/CD PAS 16617:2023 清洁炉灶和清洁烹饪解决方案 评估指南

Clean Cookstoves and Clean Cooking Solutions — Guidance for Evaluation

BS ISO 5714:2023 清洁炉灶和清洁的烹饪溶液 公共机构炉灶的测试协议

Clean cookstoves and clean cooking solutions. Test protocols for institutional cookstoves

T/CAB 2022.4-2023 对标达标评价要求 第4部分：家用微波炉

本文件规定了家用微波炉（以下简称“微波炉”）对标达标评价的术语和定义、技术要求、试验方法、评价要求等。

Requirements of benchmarking and compliance evaluation Part 4: Household microwave oven

T/CNHA 1059-2023 集中采购及类似用途厨房电器质量技术要求 家用燃气快速热水器

本文件规定了集中采购及类似用途厨房电器质量技术要求家用燃气快速热水器的术语和定义、分类与型号、材料及结构要求、产品质量分级、性能要求、试验方法、检验规则、标志、安装、包装、运输、贮存。  本标准仅适用于额定热负荷不大于70kW的家用供热水燃气快速热水器（以下简称热水器）。 本标准不适用于烟道式燃气热水器、自然给排气式燃气热水器和容积式燃气热水器。 注1：本标准所指的燃气是指符合GB/T 13611《城镇燃气分类和基本特性》标准的燃气，不包含人工燃气。

Centralized procurement and similar use of kitchen electrical quality requirements Domestic gas instantaneous water heater

T/CNHA 1058-2023 集中采购及类似用途厨房电器质量技术要求 家用燃气灶具

本标准规定了集中采购及类似用途厨房电器质量技术要求家用燃气灶具的术语和定义、要求、试验方法、检验规则及标志、用户使用说明、包装、运输等。 本标准适用于集中采购及类似用途厨房电器质量技术要求家用燃气灶和气电两用灶。

Quality Technical Requirements for Kitchen Appliances for Centralized Purchase and Similar Purposes Domestic gas cooking appliances

T/CNHA 1061-2023 集中采购及类似用途厨房电器质量技术要求 集成灶、集成电磁灶

本标准规定了集成灶、集成电磁灶的术语和定义、产品分类、要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于使用GB/T 13611规定的城镇燃气，单相额定电压≤250V的集成灶或集成电磁灶，包括： a）单个燃烧器额定热负荷≤5.23 kW的集成灶； b）额定热负荷符合a）规定、电的总额定输入功率≤5.00 kW的带有电器单元的集成灶。 c) 仅使用电能（电磁灶、电陶炉等）的集成电磁灶； 本标准不适用于在移动的交通工具中使用的集成灶、集成电磁灶，以及吸排油烟装置为内循环的集成灶、集成电磁灶。 本标准并未考虑： ——儿童使用器具的情况； ——具有肢体、感官或精神能力缺陷的人群； ——缺少经验和知识的人群。

Quality Technical Requirements for Kitchen Appliances for Centralized Purchase and Similar Purposes integration (electromagnetism) cooking appliances

T/CNHA 1063-2023 集中采购及类似用途厨房电器质量技术要求 集成水槽

本文件规范了集中采购及类似用途厨房电器质量技术要求的集成水槽（以下简称“集成水槽”）的术语和定义、产品质量分级、要求、试验方法、检验规则、标志、使用说明书、包装、运输、贮存。 本文件适用于集中采购及类似用途的家用厨房电器质量技术要求的集成水槽。 本文件不适用于商业和类似用途的集成水槽。

Technical requirements for the quality of kitchen appliances for centralized procurement and similar purposes Integrated sink

ISO 5714:2023 清洁炉灶和清洁烹饪解决方案 公共机构炉灶的测试协议

Clean cookstoves and clean cooking solutions — Test protocols for institutional cookstoves