97.080 地板处理设备 标准查询与下载

ASTM F558-17 真空吸尘器空气性能特性的标准测试方法

1.1 This test method covers procedures for determining air performance characteristics of commercial and household upright, canister, stick, hand-held, utility, and combinationtype vacuum cleaners having provisions for attaching a hose and incorporating a series universal motor. This test method can be applied to the carpet cleaning mode of operation. 1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under standard operating conditions (see Note 1). The nozzle mounted on plenum testing is an ideal air performance measurement and is not intended to represent the actual air performance during carpet or floor cleaning. NOTE 1—For more information on air performance characteristics, see Refs (1-6).2 1.3 The foot-pound-inch system of units is used in this standard. The values in parentheses are given for information only. 1.4 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in Note 2.

Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

ASTM F1977-04(2017) 确定吸尘器系统的初始 分数 过滤效率的标准测试方法

1.1 This test method may be used to determine the initial, fractional, filtration efficiency of household and commercial canister (tank-type), stick, hand-held, upright, and utility vacuum cleaner systems. 1.1.1 Water-filtration vacuum cleaners which do not utilize a replaceable dry media filter located between the water-based filter and cleaning air exhaust are not included in this test method. It has been determined that the exhaust of these vacuum cleaners is not compatible with the specified discrete particle counter (DPC) procedure. 1.2 The initial, fractional, filtration efficiencies of the entire vacuum cleaner system, at six discrete particle sizes (0.3, 0.5, 0.7, 1.0, 2.0, and >3 µm), is derived by counting upstream challenge particles and the constituent of downstream particles while the vacuum cleaner system is being operated in a stationary test condition. 1.3 The vacuum cleaner system is tested at the nozzle with the normal airflow rate produced by restricting the inlet to the nozzle adapter with the 11⁄4-in. orifice. 1.4 The vacuum cleaner system is tested with a new filter(s) installed, and with no preliminary dust loading. The fractional efficiencies determined by this test method shall be considered initial system filtration efficiencies. The filters are not changed between test runs on the same cleaner. 1.5 Neutralized potassium chloride (KCl) is used as the challenge media in this test method. 1.6 One or two particle counters may be used to satisfy the requirements of this test method. If using one counter, flow control is required to switch between sampling the upstream and downstream air sampling probes. 1.7 To efficiently utilize this test method, automated test equipment and computer automation is recommended. 1.8 Different sampling parameters, flow rates, and so forth, for the specific applications of the equipment and test procedure may provide equivalent results. It is beyond the scope of this test method to define those various possibilities. 1.9 This test method is limited to the test apparatus, or its equivalent, as described in this document. 1.10 This test method is not intended or designed to provide any measure of the health effects or medical aspects of vacuum cleaning. 1.11 This test method is not intended or designed to determine the integrity of HEPA filtration assemblies used in vacuum cleaner systems employed in nuclear and defense facilities. 1.12 The inch-pound system of units is used in this test method, except for the common usage of the micrometer, µm, for the description of particle size which is a SI unit. 1.13 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System

EN 60312-1:2017 家用真空吸尘器 第1部分：干式真空吸尘器 性能测量方法

Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance

ASTM F820-17 中央真空清洁系统空气性能特性的标准测试方法

1.1 This test method covers procedures for determining air performance characteristics of household central vacuum cleaning systems, which use a flexible cleaning hose assembly and incorporates a series universal motor(s). This test method does not apply to the carpet cleaning mode of operation where dirt or debris is involved. 1.2 These tests and calculations include determination of suction, airflow, air power, maximum air power, and input power under standard operating conditions (see Note 1). NOTE 1—For more information on air performance characteristics, see Refs (1-6).2 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are provided for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. A specific precautionary statement is given in Note 4. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems

IEC 60335-2-2 INT 1:2016 家用及类似用途电器.安全性.第2-2部分:真空清洗器及水清洗机的详细要求

Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances

BS PD IEC/TS 62885-1:2016 表面清洁用具. 试验材料和试验设备的通用要求

Surface cleaning appliances. General requirements on test material and test equipment

ASTM F1409-16 清洁地毯时吸尘器直线运动的标准测试方法

1.1 This test method covers a measurement of the relative work required to move an upright, canister, stick, or combination vacuum cleaner in a straight line with forward and backward stroking on a selection of typical carpeted surfaces. 1.1.1 This test method measures only the horizontal component of work required to move the vacuum cleaner on carpet. 1.2 This test method can be used in the testing of household and commercial vacuum cleaners. 1.3 This test method measures the relative work needed to move the vacuum cleaner with its motor or motors in operation. 1.4 This test method applies to the vacuum cleaning of carpets only. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets

ASTM F884-01(2016) 内置（中央真空）吸尘器的电机寿命评估标准测试方法

1.1 This test method is limited to motor life evaluation of central vacuum cleaners. 1.2 This test method provides a test to determine operating life of the motor, before servicing is needed, by an accelerated laboratory procedure. The motor is tested while mounted and is operated in central vacuum cleaner. 1.3 The values as stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner

ASTM F1692-01(2016) 家用中央真空清洁系统的涡轮动力喷嘴寿命评估标准测试方法

1.1 This test method covers the turbine-powered nozzle used in household central vacuum cleaning systems. 1.2 This test method provides a test for determining the operating turbine life in hours by an accelerated laboratory procedure. The turbine is tested while mounted and operated in the power nozzle. 1.3 This test method covers only the turbine-powered nozzle. The system used to provide the airflow source is not under consideration. 1.4 This test method is limited to the determination of turbine life for a household turbine-powered nozzle. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems

ASTM F555-01(2016) 直立式吸尘器的电机寿命评估标准测试方法

1.1 This test method covers motor life evaluation of household or commercial single and dual motor upright vacuum cleaners (uprights with separate motors for creating the vacuum and driving the floor brush). Self-propelled or powerassist cleaners are not within the scope of this test method. 1.2 This test method is limited to evaluation of the upright vacuum cleaner electric motor(s). 1.3 This test method provides a test to determine operating life of the motor(s), before servicing is needed, by an accelerated laboratory procedure. Motor(s) are tested while mounted and operated in the upright vacuum cleaner. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units, which are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner

ASTM F1601-01(2016) 中央真空清洁系统电动喷嘴的电机寿命评估标准测试方法

1.1 This test method covers the motorized nozzle used in household or commercial central vacuum cleaning systems. 1.2 This test method provides a test for determining operating motor life in hours by an accelerated laboratory procedure. The motors are tested while mounted and operated in the motorized nozzle. 1.3 This test method covers only the motorized nozzle. The system used to provide the airflow source is not under consideration. 1.4 This test method is limited to the determination of motor life for an electrically powered household or commercial motorized nozzle. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems

GSO IEC 60335-2-69:2016 家用和类似电器 安全 第2-69部分：工业和商业用湿式和干式真空吸尘器（包括电动刷）的特殊要求

IEC 60335-2-69:2012(E) deals with the safety of electrical motor-operated vacuum cleaners, including back-pack vacuum cleaners, and dust extractors, for wet suction, dry suction, or wet and dry suction, intended for commercial indoor or outdoor use with or without attachments. It also deals with the safety of centrally-sited vacuum cleaners, excluding the installation of the system. They are not equipped with a traction drive. The following power systems are covered: mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances, battery powered motors. This standard also applies to machines handling hazardous dust, such as asbestos. This fourth edition cancels and replaces the third edition published in 2002 and its Amendments 1 (2004) and 2 (2007). It constitutes a technical revision. The principal changes in this edition as compared with the third edition of IEC 60335-2-69 are as follows (minor changes are not listed): - the scope has been revised editorially to avoid misunderstandings; - terms and definitions has been revised with regard to the requirements revised; - the standard has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes have been made to Clauses 15, 22 and 25; - Annex AA was revised and restructured; - Annex CC was made informative; - a new Annex EE 'Emission of acoustical noise' was added and; - a new Annex FF 'Emission of vibration' was added.

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for industrial and commercial use

GSO IEC 62826:2016 表面清洁设备 带或不带牵引驱动的商业用地板处理机 测量性能的方法

IEC 62826:2014 lists the characteristic performance parameters for walk-behind and ride-on floor scrubbers and sweepers and other floor cleaning machines according to IEC 60335-2-72. This standard does not apply to IEC 60312 series. The intent is to serve the manufacturers in describing parameters that fit in their manuals, and in their literature. This may include all or some of the parameters listed in this definition document. When any of the parameters listed in this document are used, they are noted as being measurements made in accordance with this document.

Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance

GSO IEC 60335-2-72:2016 家用和类似电器 安全 第2-72部分：商业用途带或不带牵引驱动的地板处理机的特殊要求

IEC 60335-2-72:2012(E) deals with the safety of powered ride-on and powered walk-behind machines intended for commercial indoor or outdoor use for the following applications: - sweeping, - scrubbing, - wet or dry pick-up, - polishing, - application of wax, sealing products and powder based detergents, - shampooing of floors with an artificial surface. Their cleaning motion is more linear than lateral or periodic. This standard applies to machines for commercial use. The following list, although not comprehensive, gives an indication of locations that are included in the scope: - public use areas such as hotels, schools, hospitals; - industrial locations, for example factories and manufacturing shops; - retail outlets, for example shops and supermarkets; - business premises, for example offices and banks; - all uses other than normal housekeeping purposes. They may be equipped with a traction drive system. The following power systems are covered: - internal combustion engines, - mains powered motors up to a rated voltage of 250 V for single-phase appliances and 480 V for other appliances and - battery powered motors. Battery powered machines may be equipped with a built-in battery charger. This third edition cancels and replaces the second edition published in 2002 and its Amendment 1 (2005). It constitutes a technical revision. The principal changes in this edition as compared with the second edition of IEC 60335-2-72 are as follows (minor changes are not listed). The standard has be revised completely and changed significantly, in particular with regard to the following clauses: - the title has been changed for better distinction with regard to IEC 60335-2-67; - the scope has been revised editorially to avoid misunderstandings; - Clause 3 has been revised with regard to the requirements revised; - the standard has been revised in general and updated regarding state-of-the-art, as far as necessary, in particular some changes have been made to Clauses 15, 22, and 25; - the markings and instructions (Clause 7) have been revised basically; - a new Annex DD 'Emission of acoustical noise' was added; - and a new Annex EE 'Emission of vibration' was added. Keywords: Floor treatment machine; walk-behind machines, traction drive. This publication is to be read in conjunction with IEC 60335-1:2010. Look inside

Household and similar electrical appliances - Safety - Part 2-72: Particular requirements for floor treatment machines with or without traction drive, for commercial use

IEC 62885-2:2016 表面清洁设备 - 第2部分:家用或类似用途的干式吸尘器 - 测量性能的方法

This International Standard is applicable for measurements of the performance of dry vacuum cleaners for household use in or under conditions similar to those in households. The purpose of this standard is to specify essential performance characteristics of dry vacuum cleaners which are of interest to users and to describe methods for measuring these characteristics. NOTE 1 Due to the influence of environmental conditions@ variations in time@ origin of test materials and proficiency of the operator@ most of the described test methods will give more reliable results when applied for comparative testing of a number of appliances at the same time@ in the same laboratory and by the same operator. NOTE 2 This standard is not intended for cordless vacuum cleaners. For safety requirements@ reference is made to IEC 60335-1 and IEC 60335-2-2. A recommendation on information for the consumer at the point of sale is given in Annex B.

Surface cleaning appliances - Part 2: Dry vacuum cleaners for household or similar use - Methods for measuring the performance

IEC TS 62885-1:2016 表面清洁用具. 第1部分: 试验材料和试验设备的通用要求

This part of IEC 62885 specifies the physical characteristics of test equipment and material used in tests common for several products covered by standards in the IEC 62885 series for surface cleaning appliances. In addition, it provides guidance regarding the evaluation of Wilton and other types of carpets to determine their acceptability for testing. NOTE Currently, this specification covers only the Wilton carpet.

Surface cleaning appliances - Part 1: General requirements on test material and test equipment

QB/T 4982-2016 家用和类似用途电器用负离子发生器

本标准规定了家用和类似用途电器用负离子发生器的术语和定义、分类与命名、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于单相额定输入电压不超过250 V，其他额定输入电压不超过480 V，在家用和类似用途电器上使用的负离子发生器。 本标准不适用于单独使用的负离子发生器。

Negative ion generator for household and similar electrical appliances

QB/T 4980-2016 吸尘器专用附件技术要求

本标准规定了真空吸尘器专用的集尘袋、褶叠过滤器、地刷、接管、软管和卷线器的术语和定义、分类、要求和试验方法。 本标准适用于真空吸尘器专用的集尘袋、褶叠过滤器、地刷、接管、软管和卷线器。

Technical requirements of special accessories for vacuum cleaner

IEC 60335-2-69:2016 RLV 家用和类似用途电器.安全.第2-69部分:商用干湿吸尘器 包括电动刷的特殊要求

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use

IEC 60335-2-69:2016 家用和类似电器 - 安全 - 第2-69部分:湿式和干式吸尘器的特殊要求 包括电动刷 用于商业用途

Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use