97.150 铺地非织物 标准查询与下载
共找到 980 条与 铺地非织物 相关的标准，共 66 页
Textile floor coverings — Non-destructive measurement of pile thickness above the backing — WRONZ gauge method
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Resilient, textile and laminate floor coverings - Castor chair test (ISO 4918:2016, including Amd. 1:2018)
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
- 2021-07-01
ISO 9405:2015 describes the procedures for assessing the overall change in appearance of textile floor coverings caused by Vettermann drum and hexapod tumbler testers according to ISO 10361 and ISO 4918.
Textile floor coverings — Assessment of changes in appearance
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
1.1?This practice describes the equipment and operation of the Vettermann drum tester for testing pile yarn floor covering to produce changes in appearance and color due to changes in surface structure by mechanical action. 1.2?This practice is only applicable for use in testin
Standard Practice for Operation of the Vettermann Drum Tester
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
ISO 20253:2016 specifies a laboratory test method to determine the abrasion resistance and fibre bind of flocked textile floor coverings.
Textile floor coverings — Blade test — Flocked textile floor covering
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Textile floor coverings — Determination of thickness loss after brief, moderate static loading
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
ISO 10361:2015 describes procedures that use the mechanical action of a Vettermann drum or a hexapod tumbler tester to produce changes in appearance (surface structure and colour) to all types of textile floor coverings. It does not include pilling or colour changes due to other actions. Changes produced by these drum testers are assessed in accordance with the applicable assessment standard.
Textile floor coverings — Production of changes in appearance by means of Vettermann drum and hexapod tumbler tester
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
ISO 6347:2017 specifies the technical subjects that form the basis for the provision of information, at the point of sale, for consumer guidance prior to and after the purchase of a textile floor covering. It is applicable to textile floor coverings of all types.
Textile floor coverings — Consumer information
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Textile floor coverings — Non-destructive measurement of pile thickness above the backing — WRONZ gauge method
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
ISO 16908:2015 specifies the characteristics of rubber floor tile/planks. ISO 16908:2015 includes a classification system based on intensity of use, which shows where resilient floor coverings should provide satisfactory service. ISO 16908:2015 specifies rubber floor tile/planks for applications involving the use of normal footwear and does not cover applications where special footwear, such as spiked shoes, may be involved.
Resilient floor coverings — Specification for rubber floor covering — Tile/Plank
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
1.1 This test method covers the determination of dimensional changes in the lengthwise and width-wise direction and distortion likely to occur when pile floor coverings are exposed to various conditions of moisture and heat. This method is applicable to all pile floor coverings including carpet module form. 1.2 This method is applicable to machine made pile yarn floor covering. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversion to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Evaluation of Dimensional Stability of Pile Yarn Floor Covering
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Textile floor coverings — Determination of thickness loss after brief, moderate static loading
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
-
Resilient, textile and laminate floor coverings — Castor chair test — Amendment 1: Surface hardness
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Standard Specification for Rubber Sheet Floor Covering Without Backing
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Resilient floor coverings — Determination of dimensional stability and curling after exposure to heat
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Resilient floor coverings — Heterogeneous poly(vinyl chloride) floor covering — Specifications
- ICS
- 97.150
- CCS
- 发布
- 2021-07-01
- 实施
Resilient,textile and laminate floor coverings - Castor chair test
- ICS
- 97.150
- CCS
- 发布
- 2021-06-17
- 实施
- 2021-06-17
1.1 This specification covers floor covering having a vinyl plastic wear layer with backing. Products may also contain non-PVC specialty performance top layer(s) or intermediate layer(s), or both. 1.2 Two types of floor covering based on binder content are covered. The floor covering is intended for use in commercial, light commercial, and residential buildings based on serviceability characteristics. General information and performance characteristics that determine serviceability and recommended use are included in this specification. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 The following safety hazards caveat pertains only to the test methods portion, Section 11, of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Specification for Sheet Vinyl Floor Covering with Backing
- ICS
- 97.150
- CCS
- 发布
- 2021-06-01
- 实施
