A13 文件格式 标准查询与下载

ASTM E2324-04(2011) PDD配对测试的标准指南

1.1 Standard guide for the derivation of quantitative assessments of the credibility of proposed witness testimony through the application of established statistical principles to combinations of PDD examination results, and for the utilization of such assessments in the interests of justice (The Marin Protocol)1.2 This standard describes circumstances in which proven statistical principles, applied to PDD results, can reliably quantify the trustworthiness or untrustworthiness of witness testimony, and1.2.1 Delineates requirements necessary to effect the generation and practical use of such results, including:1.2.1.1 Criteria regarding witnesses to be examined,1.2.1.2 Criteria for determining facts upon which witnesses are to be examined,1.2.1.3 Certification of examiners eligible to conduct examinations,1.2.1.4 Combinations of results which support strong inferences, and1.2.1.5 Appropriate uses to which strong inferences can be put.1.3 Courts and others responsible for adjudicating questions of fact may choose whether and when to invoke paired PDD testing.1.3.1 This guide expresses the rights and obligations of all participants in order to best serve the interests of justice when it is invoked.1.3.2 Paired PDD testing must not be invoked in any case in any jurisdiction where to do so would violate the laws of that jurisdiction.1.3.3 Adherence to these guidelines ensures that the conclusions reached will be valid.1.4 This standard is directed to the proposed testimony of witnesses in criminal, civil, administrative and family court litigation, regarding factual claims, where1.4.1 It is unlikely that the witnesses could be honestly mistaken, and1.4.2 The facts in dispute are such that the case may hinge on whom the trier of fact believes; whenever,1.4.3 Witnesses on opposite sides of a case offer contradictory testimony.1.4.4 Two or more witnesses testifying for one side offer mutually corroborating testimony.

Standard Guide for PDD Paired Testing

ASTM E2324-04 PDD配对试验的标准指南

1.1 Standard guide for the derivation of quantitative assessments of the credibility of proposed witness testimony through the application of established statistical principles to combinations of PDD examination results, and for the utilization of such assessments in the interests of justice (The Marin Protocol)1.2 This standard describes circumstances in which proven statistical principles, applied to PDD results, can reliably quantify the trustworthiness or untrustworthiness of witness testimony, and1.2.1 Delineates requirements necessary to effect the generation and practical use of such results, including:1.2.1.1 Criteria regarding witnesses to be examined,1.2.1.2 Criteria for determining facts upon which witnesses are to be examined,1.2.1.3 Certification of examiners eligible to conduct examinations,1.2.1.4 Combinations of results which support strong inferences, and1.2.1.5 Appropriate uses to which strong inferences can be put.1.3 Courts and others responsible for adjudicating questions of fact may choose whether and when to invoke paired PDD testing.1.3.1 This guide expresses the rights and obligations of all participants in order to best serve the interests of justice when it is invoked.1.3.2 Paired PDD testing must not be invoked in any case in any jurisdiction where to do so would violate the laws of that jurisdiction.1.3.3 Adherence to these guidelines ensures that the conclusions reached will be valid.1.4 This standard is directed to the proposed testimony of witnesses in criminal, civil, administrative and family court litigation, regarding factual claims, where1.4.1 It is unlikely that the witnesses could be honestly mistaken, and1.4.2 The facts in dispute are such that the case may hinge on whom the trier of fact believes; whenever,1.4.3 Witnesses on opposite sides of a case offer contradictory testimony.1.4.4 Two or more witnesses testifying for one side offer mutually corroborating testimony.

Standard Guide for PDD Paired Testing

SY/T 5600-2002 裸眼井、套管井测井作业技术规范

本标准规定了在裸眼井、套管井内电缆传输测井作业应具备的条件和技术要求。 本标准适用于在裸眼井、套管井内电缆传输测井作业和现场监督。

The operating regulation of open hole and cased hole logging

WH/T 15-2002 中国机读规范格式

China MARC Format / Authorities

CGSB 171.4-CAN/CGSB-2001 加拿大地球空间信息交换标准 - 数字地理信息交换标准(CGIS - DIGEST)

This standard provides terminology, defines Canadian viticultural areas (geographical indications), prescribes certain oenological practices, and specifies technical and labelling requirements for wine

Canadian Geomatics Interchange Standard - Digital Geographic Information Exchange Standard (CGIS - DIGEST)

DIN 16560-4:2000 行政管理,使用规则.第4部分:化学工业试验报告.质量D.99A

The document provides the definition of an implementation of the EDIFACT message type QUALITY to transmit test report data of the chemical industry.

EDIFACT - Application rules - Part 4: Test report of chemical industry; QUALITY D.99A

DB15/T 319-1999 检验报告格式与书写规范

本标准适用于自治区内产品质量监督检验机构各种类别检验报告的书写。

Form and drafting specification for test report

ARMY MIL-HDBK-1916-1999 MIL-STD-1916的配套文件

Purpose. The purpose of this handbook is to

COMPANION DOCUMENT TO MIL-STD-1916

NF Z15-603:1998 机读卡 法国医疗卡发行商的编号系统和注册程序

Machine readable cards - Numbering system and registration procedure for healthcare card issuers in France

DIN 16560-1:1998 行政管理、商业和运输用电子数据交换系统(EDIFACT).使用规则.第1部分:服务部分

The document provides recommendations for the application of the service segments defined in DIN EN 29735 according to EDIFACT syntax version 3.

EDIFACT - Application rules - Part 1: Service segments

ASTM E444-98 审讯文件方面涉及法学工作领域的说明

1.1 This description covers in general the duties of forensic document examiners, also referred to as questioned document examiners, examiners of questioned documents, document examiners, or document analysts.

Standard Guide for Scope of Work Relating to Forensic Document Examiners

NF Z71-307-4:1996 信息技术.文本和办公系统用键盘设计.第4部分:数字部分

Information technology. Keyboard layouts for text and office systems. Part 4 : numeric section.

NF Z71-371-5:1996 信息技术.国际界面标准AMH2n.新闻传送系统.个人间新闻传送.第5部分:扩展MS通道(P7)用AMH24-IPM要求

INFORMATION TECHNOLOGY. INTERNATIONAL STANDARDIZED PROFILES AMH2N. MESSAGE HANDLING SYSTEMS. INTERPERSONAL MESSAGING. PART 5 : AMH24. IPM REQUIREMENTS FOR ENHANCED MS ACCESS (P7). (EUROPEAN STANDARD EN ISP 12062-5).

BS EN 726-6:1996 识别卡系统.电讯.集成电路卡和终端.第6部分:通讯特性

This Part of EN 726 defines telecommunication features using IC cards. These telecommunication features may be used by more than one application. This Part of EN 726 describes the card-terminal interface. However, when needed the system is considered as well. This Part of EN 726 describes the following telecommunication features: - Abbreviated dialling; - Last number dialling (stored within the card); - Fixed number dialling.

Identification card systems - Telecommunications - Integrated circuit(s) cards and terminals - Telecommunication features

BS EN 726-2:1996 识别卡系统.电讯.集成电路卡和终端的要求.安全性结构

This Part of EN 726 specifies a security framework for telecommunication use of IC cards. This specification does not describe any implementation details. It describes: - a general security approach resulting in a methodology, different card phases for identifying security requirements and a description of security services which can be offered by the IC card; - the implementation of the general security approach to the application independent IC card, resulting in a list of application independent security requirements, a selection of needed security services and a description of a common set of application independent security mechanisms; - the implementation of the general security approach to applications using IC cards, resulting in a methodology which is used to design the set of security mechanisms for specific applications.

Identification card systems - Telecommunications - Integrated circuit(s) cards and terminals - Security framework

BS EN 726-3:1996 识别卡系统.电信.集成电路卡和终端.应用独立卡要求.

This part of EN 726 specifies the application-independent characteristics of multi-application IC-cards and plug-in modules for telecommunication applications in order to ensure interoperability for telecommunication cards with the various systems and terminals. Mono-application cards are considered to be a subset of multi-application cards. All common characteristics, necessary for the interactions between the card and the external world are defined. This part of EN 726 does not preclude cards from other sectors from containing telecommunication application(s) based on this part of EN 726. The application-specific characteristics are not defined in this part of EN 726. They are defined and described in the relevant application requirements. This part of EN 726 does not specify any internal technical implementation. It describes: - the requirements for the physical characteristics of the card, the electronic signals and the transmission protocols; - the application-independent logical model which should be used as a basis for the design of the logical structure of, optionally, several applications in the card; - the security facilities concerning the access to the different parts within the card and the possible interactions between these parts. Also the description of security functions which should be needed generally by the various applications. They should be available as a common set; - the description of the application-independent functions between card and external world, should be used as a standardized common set for all basic functions used in international applications; - the mapping of these application messages (commands and responses) under standardized protocols; - the contents of the master File; - the interoperability of IC cards; - the overall security aspects for card-manufacturers, application providers and card-issuers.

Identification card systems - Telecommunications - Integrated circuit(s) cards and terminals - Application independent card requirements

ISO 9019:1995 证券 证书编号

Establishes rules for the numbering of security certificates and applies to all types of securities, regardless of issuer or country of issuance. Replaces the first edition.

Securities - Numbering of certificates

NF Z15-023:1995 识别卡.机器可读旅行文献.第1部分:机器可读护照

Identification cards. Machine readable travel documents. Part 1 : machine readable passport.

BS EN 726-1:1995 识别卡系统.电讯.集成电路卡和和终端的要求.第1部分:系统概述

EN 726 defines the requirements for integrated circuit (IC) cards and card terminals for telecommunication use in Europe. These requirements are to be used as a European standard to cover multi-application cards to be used for services available on the public telecommunications networks via card operated terminals provided by the telecommunication industry. EN 726 specifies a security framework for cards and card terminals for telecommunication use. EN 726 also specifies the application independent characteristics of multi-service IC cards, and the application independent, card related characteristics of card terminals for telecommunication use. EN 726 also covers payment methods specifically for telecommunications use, namely auto-billing cards (i.e. cards which enable the personal or business telephone account of card users to be automatically billed for calls made anywhere in Europe) and pre-payment cards. The purpose of EN 726 is to provide the necessary requirements and facilities for the introduction of card systems by Administrations and Network Operators. This standard aims to permit the inter-operability of cards and card systems in Europe. This Part of EN 726: - describes the general overview and the organization of the complete standard; - defines the general concepts including the system overview, the involved entities and the five different phases in the life-cycle of a card and a card system.

Identification card systems - Telecommunications - Integrated circuit(s) cards and terminals - System overview

NF Z15-050:1995 识别卡.试验方法

IDENTIFICATION CARDS. TEST METHODS. (EUROPEAN STANDARD EN ISO/CEI 10373).