共找到 347 条与 包装方法 相关的标准,共 24 页
1.1 이 방법은 단망 분류기를 이용하여 지료 또는 펄프 표본의 미세물질 함량을 측정하기
Testing method for retention of fines fraction of paper stock
이 규격은 포장용 가공지의 내점착성1) 시험 방법에 대하여 규정한다.
Testing method for pressure sensitive adhesive resistance of processed papers for packaging
이 규격은 도관의 측정 방법에 대하여 규정한다.
Measuring method for vessels for pulp and paper of hardwood
This guide assists users in design and development of packaging intended for the protection of goods while they are in transit from point of origin to final destination. By following all steps of this guide, users will be assured that the most important factors are included in package design. In some cases, the sequence of steps may be changed, and often the steps may occur simultaneously with concurrent work activities. The design process focuses on protection from hazards of handling, storage, and shipping while recognizing the economics of all other facets of distribution, including packaging materials and labor, and transportation. In transport packaging, distribution is generally defined as inclusion of handling, storage, and transportation factors.1.1 This guide covers an approach to design of packaging for distributing goods through the hazards of handling, storage, and transportation.1.2 The principal content of this guide is the identification of the key steps involved in development of transport packages, including shipping containers, interior protective packaging, and unit loads. It is recognized that actual usage and application to individual design projects may vary appreciably without diminishing the value of the process. Consult with a packaging professional whenever needed.1.3 This guide is not intended for design of primary packaging unless the primary package is planned for use as a shipping container.1.4 The user of this guide must be aware of the carrier rules regarding packaging for shipment via each mode of transportation in which the transport package may move, such as the National Motor Freight Classification (less-than truckload) and the Uniform Freight Classification (railroad). For hazardous materials packaging, the packaging must perform to the requirements of the applicable modal regulations listed in Section 2.1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Guide for Transport Packaging Design
1.1 This classification covers various types of child-resistant packages.1.2 The examples for each type of child-resistant packaging are not intended to be all-inclusive, but are included only as an aid in the understanding and comprehension of each type of classification.1.3 Listings are not to be considered endorsements or approval of the package by ASTM.
Standard Classification of Child-Resistant Packages
이 규격은 금속이나 판지 또는 나무로 만든 원통형 수송 용기의 낙하 시험 방법에 대하여
Drop test for cylindrical shipping containers
이 규격은 양면 또는 이중 양면 골판지의 정적 만곡 시험 방법에 대하여 규정한다.
Static bending test for corrugated paperboard
이 규격은 운송용 포장 또는 단위 적재 화물의 수평 충격 시험 방법(수평면 또는 경사면 시
Method of incline impact test for packages and shipping containers
이 규격은 내용물을 채운 크라프트 지대(이하 지대라 한다.)의 낙하 시험 방법에 대하여 규
Method of drop test for kraft paper sacks
이 규격은 플라스틱 포장 용기 및 액체를 포함하는 내부 플라스틱 용기로 구성된 포장물에 있
Packaging-Transport packaging for dangerous goods-Plastic compatibility testing
이 규격은 주어진 조건하에서, 열가소성 플라스틱 필름으로 만든 대의 가장자리 접힘부에서의
Packaging-Sacks made from thermoplastic flexible film-Tear propagation on edge folds
이 규격은 종이 검 테이프 및 천 검 테이프 등의 초기 점착성과 접착력 시험 방법에 대하
Testing method for adhesive strength of gummed tape
이 규격은 강 사이징한 판지의 침수 시험 방법에 대하여 규정한다.
Water immersion testing method of paperboard
The standard deals with general statistical principles of sampling of bulk materials. This means methods such as design of sampling methods and determining precision and trueness.
Statistical aspects of sampling from bulk materials - Part 1: General principles (ISO 11648-1:2003)
この規格は,次に示す仕様について規定する。
Packaging -- Linear bar code and two-dimensional symbols for product packaging
This International Standard gives guidance on quality management provisions applicable to the manufacture, measuring and monitoring of design type approved dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings. This International Standard can only be used in combination with ISO 9001:2000 and is not a stand-alone document. It does not apply to design type testing, for which reference is made to 6.1.5, 6.5.4 and 6.6.5 of the UN Model Regulations Ml.
Packaging - Transport packages for dangerous goods - Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings - Guidelines for the application of ISO 9001
ISO 16103:2005 specifies the requirements and test methods for the production of recycled plastics materials to be used for packagings for the transport of dangerous goods. This includes guidance on the quality assurance programme.
Packaging - Transport packages for dangerous goods - Recycled plastics material
This European Standard gives general requirements for the design of all types of cork removal devices.
Glass packaging — Cork removal devices — General requirements
This European Standard specifies performance requirements and methods of test for non-reclosable packaging that has been designated child-resistant and which is intended to contain non- pharmaceutical products. This standard is intended for type approval only (2.5) and is not intended for quality assurance purposes. This European Standard applies to non-reclosable packages of the single-use type consisting of one or more individual units. Non-reclosable packages for pharmaceutical products are excluded from the scope of this standard. These are the subject of a separate standard, EN 14375 Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing.
Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products; English version of DIN EN 862:2006-02
This test method of applying force may be used as a standard test to compare the characteristics of a given design of container/child-resistant closure system with a standard or to compare the characteristics of container/child-resistant closure systems differing in construction. It may be used to simulate certain manipulations that may be expected to occur in protocol testing4 (such as, prying with the teeth or objects in the room, biting, and pulling with the teeth). This test method may be used to establish performance specifications. 1.1 This test method covers the measurement of the force required to separate (or "shell") the snap-fitted outer cap from the inner cap of Type IA, IB, or IC child-resistant closures.1.2 This test method does not measure the force required to separate parts of a child-resistant closure system that were originally "screwed-on" instead of "snapped-on" (for example, pull a cap over or through continuous or multi-start threads when the cap was originally screwed on).1.3 The values stated in SI units are to be regarded as the standard. The inch-pound units given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号