C78 安全卫生管理 标准查询与下载

DB50/T 404.5-2011 特种设备安全管理准则 第5部分：使用单位

本标准规定了使用单位特种设备安全管理准则。本标准适用于使用单位的特种设备安全管理工作。

Special Equipment Safety Management Guidelines Part 5: User Units

DB50/T 404.1-2011 特种设备安全管理准则 第1部分：区县（自治县）

本标准规定了乡镇（街道）行政辖区内特种设备安全管理准则。本标准适用于乡镇（街道）行政辖区内的特种设备安全管理工作。

Special Equipment Safety Management Guidelines Part 1: Districts and Counties (Autonomous Counties)

DB50/T 404.2-2011 特种设备安全管理准则 第2部分：乡镇（街道）

本标准规定了乡镇（街道）行政辖区内特种设备安全管理准则。本标准适用于乡镇（街道）行政辖区内的特种设备安全管理工作。

Special Equipment Safety Management Guidelines Part 2: Township (Street)

AQ 4215-2011 制革职业安全卫生规程

本标准规定了制革职业安全卫生的要求和技术措施。 本标准适用于将原料皮经准备、鞣制、整理，加工成成品革的制革企业、车间和场所。

Occupational safety and health regualtion for the leather manufacture

AQ 5208-2011 涂装职业健康安全通用要求

本标准规定了涂装职业健康安全的基本要求。主要内容包括：一般要求，防尘、防毒、防噪声、防高温安全技术措施，个人防护措施，事故应急处置措施，职业健康安全管理。 本标准适用于涂装企业的防尘、防毒、防噪声、防高温、个体防护、事故应急处置等安全技术措施的设计、施工、验收、运行以及职业健康管理，也适用于安全生产和职业危害控制的监督管理部门对涂装企业生产过程中粉尘、毒物、噪声、高温危害等的监督管理。户外涂装作业、其他企业的涂装作业岗位可参照执行。

General requirement of occupational health & safety for painting

AQ/T 9007-2011 生产安全事故应急演练指南

本标准规定了生产安全事故应急演练（以下简称应急演练）的目的、原则、类型、内容和综合应急演练的组织与实施，其他类型演练的组织与实施可参照进行。 本标准适用于针对生产安全事故所开展的应急演练活动。

Guidelines for emergency exercises of production safety accidents

DB36/T 604-2011 特种设备安全使用管理要求及评价

Special equipment safety use management requirements and evaluation

DB44/T 800-2010 水泥企业安全生产管理规范

本标准规定了广东省境内水泥企业的安全基础管理、机械设备设施、电气设备设施、作业场所、危险化学品、职业安全健康和安全绩效评定等安全生产管理方面的内容。本标准适用于广东省境内水泥企业，不适用于带自备矿山水泥企业的矿山部分。

Safety production management regulations for cement enterprises

AQ/T 4208-2010 有毒作业场所危害程度分级

本标准规定了有毒作业场所危害程度的分级指标和方法。 本标准适用于有毒作业场所危害程度的分级。

Classification of health hazard levels of toxic chemicals workplace

AQ/T 4207-2010 作业场所职业危害监管信息系统基础数据结构

本标准规定了作业场所职业危害监管信息系统的基础数据结构。 本标准适用于作业场所职业危害监管信息系统的建设,其他相关职业危害信息系统的建设可参照执行。

The basic data structure of occupational hazard supervision information system at workplace

AQ/T 9006-2010 企业安全生产标准化基本规范

本标准适用于工矿企业开展安全生产标准化工作以及对标准化工作的咨询、服务和评审;其他企业和生产经营单位可参照执行。 有关行业制定安全生产标准化标准应满足本标准的要求;已经制定行业安全生产标准化标准的,优先适用行业安全生产标准化标准。

Basic norms for work safety standardization of enterprises

CSA Z10535-03-CAN/CSA-2003 伤残人员的提升和装运- 要求和测试方法代替Z323.5-98-CAN/CSA

This European standard specifies requirements and test methods only for hoists and body support units intended for the transfer of disabled persons as classified in EN ISO 9999:1998:

Hoists for the Transfer of Disabled Persons - Requirements and Test Methods Replaces Z323.5-98-CAN/CSA [Replaced: CSA Z323.5-98, CSA Z323.5-98]

ASTM E1076-85(1999) 在固体废物处理单位保存卫生和安全记录的标准规程

1.1 The purpose of this practice is to provide guidance to solid waste processing facility managers responsible for maintaining records of the health and safety experience of their employees. This practice describes general principles for establishing a procedure to collect and document health and safety data within a solid waste processing facility and provides specific information on the forms and procedures to be used in recording illnesses among employees. 1.2 This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities

ASTM E1076-85(2005) 固体废料加工设备上的健康防护和安全记录

This practice is intended for use in resource recovery and other types of solid waste processing facilities. The occupational health risks in such facilities are not well documented and the purpose of this practice is to facilitate recording of information that can be useful in assessing the occupational health significance of working in these facilities. The records developed and maintained in accordance with this practice can be used as a basis for spotting trends (if any) in the types or frequency, or both, of injuries and illnesses. This information may, in combination with data on environmental health conditions within a waste processing facility, be useful in identifying possible cause/effect relationships. This practice is not intended as a design guide for an occupational health and safety program but rather is intended to build upon existing occupational health programs and to utilize currently available health and environmental records.1.1 The purpose of this practice is to provide guidance to solid waste processing facility managers responsible for maintaining records of the health and safety experience of their employees. This practice describes general principles for establishing a procedure to collect and document health and safety data within a solid waste processing facility and provides specific information on the forms and procedures to be used in recording illnesses among employees.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities

JIS T 8203:1980 便携式过滤型烟雾和灰尘收集器

Portable filter type dust and fume collectors

TJ 36-1979 工业企业设计卫生标准

Hygienic Standards for Design of Industrial Enterprises