D53 建材原料矿 标准查询与下载

ISO 11412:1998 铝生产用碳素材料 煅烧焦 水分测定

This International Standard specifies a method for the determination of the water content of calcined coke as a percentage by mass of the fragmented, granular carbon and graphite material (solid matter). The method is based on that described in DIN 51904:1981, Prufung von Kohlenstoffmaterialien - Bestimmung des Wassergehaltes - Feststoffe.

Carbonaceous materials for the production of aluminium - Calcined coke - Determination of water content

DLA A-A-59303-1998 工业滑石

This commercial item description covers three types of modified commercial technical grade talc. Types T1 and T3 are intended for use as simulants for riot control agents CS(orthochlorobenzylidene malononitrile), CS1 and CS2.

TALC, TECHNICAL

ASTM D2590-98 温石棉取样的试验方法

1.1 This test method covers procedures for taking a composite or a master composite sample, at the mine or at the factory or from a consignment, of a lot of milled asbestos fiber used as raw material in the chrysotile asbestos industry, conditioning this sample and reducing it in quantity through a series of steps to provide a relatively small test specimen of loose asbestos fibers, representative of the lot and suitable for the determination of a single property. 1.2 This sampling method is suitable for taking test specimens of chrysotile asbestos for Test Methods: C1119, C1120, C1121, C1122, C1123, C1124, C1125, C1154, C1162, D1118, D2589, D2752, D2946, D2947 D2985, D2987, D3639, D3752 and D3880. 1.3 Test Method D3879 covers the sampling of amphibole asbestos fibers. 1.4 The values stated in SI units are to be regarded as standard. The inch-pound units shown in parenthesis are for information only. 1.5 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.> A specific caution statement is given in 6.1.1.

Standard Test Method for Sampling Chrysotile Asbestos

ASTM D2590-98(2002)e1 温石棉取样的试验方法

1.1 This test method covers procedures for taking a composite or a master composite sample, at the mine or at the factory or from a consignment, of a lot of milled asbestos fiber used as raw material in the chrysotile asbestos industry, conditioning this sample and reducing it in quantity through a series of steps to provide a relatively small test specimen of loose asbestos fibers, representative of the lot and suitable for the determination of a single property.1.2 This sampling method is suitable for taking test specimens of chrysotile asbestos for Test Methods: C 1119, C 1120, C 1121, C 1122, C 1123, C 1124, C 1125, C 1162, D 1118, D 2589, D 2752, D 2946, D 2947, D 2985, D 2987, D 3639, D 3752 and D 3880. 1.3 Test Method D 3879 covers the sampling of amphibole asbestos fibers.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sampling Chrysotile Asbestos

ASTM D2590-98(2002) 温石棉取样的试验方法

1.1 This test method covers procedures for taking a composite or a master composite sample, at the mine or at the factory or from a consignment, of a lot of milled asbestos fiber used as raw material in the chrysotile asbestos industry, conditioning this sample and reducing it in quantity through a series of steps to provide a relatively small test specimen of loose asbestos fibers, representative of the lot and suitable for the determination of a single property.1.2 This sampling method is suitable for taking test specimens of chrysotile asbestos for Test Methods: C 1119, C 1120, C 1121, C 1122, C 1123, C 1124, C 1125, C 1162, D 1118, D 2589, D 2752, D 2946, D 2947, D 2985, D 2987, D 3639, D 3752 and D 3880. 1.3 Test Method D 3879 covers the sampling of amphibole asbestos fibers.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sampling Chrysotile Asbestos

ASTM D2590-98(2006)e1 温石棉取样的试验方法

1.1 This test method covers procedures for taking a composite or a master composite sample, at the mine or at the factory or from a consignment, of a lot of milled asbestos fiber used as raw material in the chrysotile asbestos industry, conditioning this sample and reducing it in quantity through a series of steps to provide a relatively small test specimen of loose asbestos fibers, representative of the lot and suitable for the determination of a single property.1.2 This sampling method is suitable for taking test specimens of chrysotile asbestos for Test Methods: C 1119, C 1120, C 1121, C 1122, C 1123, C 1124, C 1125, C 1162, D 1118, D 2589, D 2752, D 2946, D 2947, D 2985, D 2987, D 3639, D 3752 and D 3880. 1.3 Test Method D 3879 covers the sampling of amphibole asbestos fibers.1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Sampling Chrysotile Asbestos

ASTM D351-97(2003) 天然白云母块及薄片的目检质量标准分类

The properties included in this standard are those required to control the visual quality, usable area, thickness, hardness, and stiffness.1.1 This classification covers the determination of commercially available natural muscovite block mica and is intended to be independent of the basic color of the mica or its source. 1.2 Muscovite mica is characterized by having an optical axial angle between 50 and 75176 (see Appendix X1); and has a weight loss when heated for 5 min at 600176C not exceeding 0.2% (based on the weight after drying at 120176C). 1.3 The visual system of classifying the quality of natural muscovite mica covered by this specification is based upon relative amounts of visible foreign inclusions such as air bubbles, stains, and spots in combination with relative amounts and types of waviness, as well as other physical properties. In this system, a perfectly clear, transparent, flat specimen of mica is the visual standard of perfection. Increasing amounts of visual defects lower the visual quality, and a total of 13 levels of visual quality are covered by this standard. This method of classification, generally known as the Bengal India System, is purely qualitative and is entirely dependent on personal opinion and judgment. 1.4 The standards for visual quality classification that are covered in this classification are the best commercially available concept of the various qualities and their relative positions. Variations in the methods of using and applying these standards from those herein defined may be specified by the purchaser, or defined by agreement between the supplier and the purchaser. 1.5 Standard size classifications are defined, based upon available usable rectangular areas and the minimum dimensions of the rectangles that the pieces will yield. Precautions to be taken in making thickness measurements are also described. 1.6 This standard covers the following two definite forms of commercial preparation: 1.6.1 Form 18212Full-trimmed natural block mica, 0.007 in. (0.178 mm) minimum thickness. 1.6.2 Form 2 -Partially-trimmed natural block mica, 0.007 in. minimum thickness. 1.7 The basic color of mica, such as white, ruby, light green, dark green, brownish green, and rum, as well as other colors, and the method of controlling the color and other problems associated with the basic color, are not a part of this classification. 1.8 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality

ASTM D351-97 天然白云母块及薄片的目检质量标准分类

1.1 This classification covers the determination of commercially available natural muscovite block mica and is intended to be independent of the basic color of the mica or its source. 1.2 Muscovite mica is characterized by having an optical axial angle between 50 and 75176 (see Appendix X1); and has a weight loss when heated for 5 min at 600176C not exceeding 0.2% (based on the weight after drying at 120176C). 1.3 The visual system of classifying the quality of natural muscovite mica covered by this specification is based upon relative amounts of visible foreign inclusions such as air bubbles, stains, and spots in combination with relative amounts and types of waviness, as well as other physical properties. In this system, a perfectly clear, transparent, flat specimen of mica is the visual standard of perfection. Increasing amounts of visual defects lower the visual quality, and a total of 13 levels of visual quality are covered by this standard. This method of classification, generally known as the Bengal India System, is purely qualitative and is entirely dependent on personal opinion and judgment. 1.4 The standards for visual quality classification that are covered in this classification are the best commercially available concept of the various qualities and their relative positions. Variations in the methods of using and applying these standards from those herein defined may be specified by the purchaser, or defined by agreement between the supplier and the purchaser. 1.5 Standard size classifications are defined, based upon available usable rectangular areas and the minimum dimensions of the rectangles that the pieces will yield. Precautions to be taken in making thickness measurements are also described. 1.6 This standard covers the following two definite forms of commercial preparation: 1.6.1 Form 1 -Full-trimmed natural block mica, 0.007 in. (0.178 mm) minimum thickness. 1.6.2 Form 2 -Partially-trimmed natural block mica, 0.007 in. minimum thickness. 1.7 The basic color of mica, such as white, ruby, light green, dark green, brownish green, and rum, as well as other colors, and the method of controlling the color and other problems associated with the basic color, are not a part of this classification. 1.8 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only.

Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality

ASTM C838-96(2005) 加工炭精及石墨型材松密度的标准试验方法

This test method provides a means of determining bulk density on as-manufactured logs, blocks, or shaped articles. This test method is suitable for manufacturing control and acceptance specifications. Test Method C 559 may be used when a higher degree of accuracy is required. 1.1 This test method covers the determination of the density of as-manufactured carbon and graphite from measurements of mass and dimensions at room temperature. 1.2 This test method is applicable to boronated carbon and graphite. 1.3 This test method is not applicable to carbon- and graphite-containing materials that are thermally unstable at or below temperatures of 200176;C. 1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

JC/T 595-1995 干磨云母粉

Dry ground mica powder

JC/T 596-1995 湿磨云母粉

Wet ground mica powder

SN/T 0483-1995 进出口石英石（砂）化学分析方法

Methods of chemical anallysis of quartz andsiliceous sand for import and export

SN/T 0485.1-1995 出口滑石中二氧化硅含量分析方法.动物胶凝聚重量法-滤液钼蓝分光光度法

Methods for analysis of silicon dioxidecontent in talc for export.Gelatin coagulationgravimetric method-molybdenum bluespectrophotemetry method for filtrate1995-09-06

SN/T 0485.2-1995 出口滑石中二氧化硅含量分析方法.聚环氧乙烷凝聚重量法-滤液钼蓝分光光度法

Methods for analysis of silicon dioxidecontent in talc for export.Polyepoxyethane coagulationgravimetric method-molybdenum bluespectrophotemetry method for filtrate1995-09-06

JC/T 49-1995 工业原料云母

Industrial Raw Mica

JIS R 9101:1995 石膏的化学分析方法

この規格は，天然セッコウ，化学セッコウ及び焼セッコウの化学分析方法について規定する。

Methods for chemical analysis of gypsum

ASTM C1301-95(2001) 用感应耦合等离子体原子发射光谱法(ICP)和原子吸收法(AA)测定石灰岩和石灰中常量元素和痕量元素的标准试验方法

The presence and concentration of elements in lime and limestone is important in determining product quality and its suitability for various uses. This test method provides a means of measuring the major and trace element concentration in lime and limestone.1.1 The following test method covers the use of inductively coupled plasma-atomic emission spectroscopy (ICP) and atomic absorption spectroscopy (AA) in the analysis of major and trace elements in limestone and lime (calcined limestone). 1.2 Table 1 lists some of the elements that can be analyzed by this test method and the preferred wavelengths. Also see U.S. EPA Method 200.7 and 200.9. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

JIS M 8850:1994 石灰石的化学分析方法

この規格は，石灰石の分析方法について規定する。

Methods for chemical analysis of limestone

KS E 3808-1993 寿山石分析方法

이 규격은 납석의 분석 방법에 대하여 규정한다.

Methods for chemical analysis of agalmatolits

QB/T 1638-1992 日用陶瓷用滑石

本标准规定了日用陶瓷用滑石的产品分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于日用陶瓷用的滑石。

Talc for daily ceramics