G53 颜料基础标准与通用方法 标准查询与下载

GB 9287-1988 颜料易分散程度的比较 振荡法

Comparison of ease of dispersion of pigments－Oscillatory shaking method

GB 5211.14-1988 颜料筛余物的测定 机械冲洗法

Determination of residue on sieve of pigment－Mechanical flushing procedure

GB/T 9287-1988 颜料易分散程度的比较 振荡法

本标准是适用于两种类似颜料在指定介质中的易分散程度比较的通用试验方法。试验结果是以在一专用仪器中达到规定细度所需的时间或用研磨30min后达到的细度来表示〕。注：当本通用方法适用于指定颜料或体质颜料时，只要在该颜料或体质颜料的产品标准中列入参照本方法的条款，并注明由于产品的特性需作的变更。仅当本通用方法不适用于某特定产品时，才应规定一个专用方法来进行易分散程度的比较。

Comparison of ease of dispersion of pigments--Oscillatory shaking method

GB/T 5211.14-1988 颜料筛余物的测定 机械冲洗法

本标准规定了以机械冲洗法测定颜料筛余物的通用试验方法之一。 本方法适用于在水中分散的颜料或体质颜料，也能用于水中不溶的其他粉末或颗粒，不适用于水难润湿的或造粒成球的颜料和体质颜料。 注：当本通用方法适用于指定颜料或体质颜料时，只要在该颜料或体质颜料的产品标准中列入参照本方法的条款， 并注明由于产品的特性需要的变更。仅当此通用方法不适用于某特定产品时，才应规定一个专用方法测定筛余物。

Determination of residue on sieve of pigment--Mechanical flushing procedure

GB 5211.13-1986 颜料水萃取液酸碱度的测定

Determination of pH of Pigment Water Extract

GB/T 1717-1986 颜料水悬浮液pH值的测定

本标准规定了测定颜料水悬浮液pH值的通用试验方法。 本标准等效采用国际标准ISO787/9-1981《颜料和体质颜料通用试验方法--第九部分：水悬浮液pH值的测定》。颜料时，只要在该颜料或体质颜料的产品标准中列入参照本方法的条 注：当本通用方法适用于指定颜料或体质款，并注明由于产品的特性需作的变更。仅当本通用方法不适用于某特定产品时，才应规定一个专用方法测定水悬浮液的pH值。

Determination of pH value of an aqueous suspension of pigments

GB 5211.4-1985 颜料装填体积的表观密度的测定

Determination of Apparent Density of Packed Volume of Pigments

GB/T 1716-1979 颜料干粉耐热性测定法

本方法是指颜料干粉在一定温度下，经过规定时间后，与原样比较色泽的差异来评定耐热。以℃表示。

Determination of the heat resistance property of dry powder dyestuff

GB/T 1709-1979 颜料遮盖力测定法

本方法是指颜料和调墨油研磨成色浆，均匀地涂刷于黑白格玻璃板上，使黑白格恰好被遮盖的最小用颜料量，以克/米表示。

Covering power determination of dyestuff

GB/T 1710-1979 颜料耐光性测定法

本方法是将颜料研磨于一定的介质中，制成样板，与日晒牢度蓝色标准同时在规定的光源下，经一定时间曝晒后，比较其变色程度，以“级”表示。

Light resistance determination of dyestuff

GB/T 1715-1979 颜料筛余物测定法

本方法是指颜料通过一定孔径的筛子后，剩余物重量与试样重量之比。以百分数表示。

Determination of the screened material from dyestuff

GB/T 1719-1979 颜料流动度测定法

本方法是指颜料与调墨油经研磨后，取一定体积的色浆，在一定压力和温度下经一定时间，色浆被压成圆形，量其直径。以毫米表示。

Determination of dyestuff fluidity

DIN 55985-1:2020 颜料. 主色调系统中颜料颜色的比较. 第1部分: 有色颜料

This document describes methods for visual and/or colorimetric comparative assessment of the colour of coloured pigments in mass-tone systems.

Pigments - Comparison of the colour of pigments in mass-tone systems - Part 1: Coloured pigments

DIN 55985-2:2020 颜料. 主色调系统中颜料颜色的比较. 第2部分: 黑色颜料

The document describes methods for visual and/or colorimetric comparative assessment of the colour of pigments in mass-tone systems. This document is intended for the use with mass tones of nearly black samples; the application for grey (nearly achromatic) samples is possible.

Pigments - Comparison of the colour of pigments in mass-tone systems - Part 2: Black pigments

DIN 55982:2018 颜料.浆糊法测定白色颜料的增白能力

The method according to this standard covers the determination of the whitening capacity of white pigments in pastes which are prepared by dispersing the white pigments in colour pastes, e. g. black pastes, developed under specified conditions.

Pigments - Determination of lightening power of white pigments according to the paste method

DB34/T 2994-2017 炭黑中 18 种多环芳烃含量的测定 气相色谱-质谱法

本标准规定了气相色谱-质谱法测定炭黑中 18 种多环芳烃含量的方法。 本标准适用于炭黑中 18 种多环芳烃含量的测定

Determination of 18 Polycyclic Aromatic Hydrocarbons in Carbon Black by Gas Chromatography-Mass Spectrometry

DIN 55982:2017 颜料. 糊状法测定白色颜料的发光强度

The method according to this standard covers the determination of the whitening capacity of white pigments in pastes which are prepared by dispersing the white pigments in colour pastes, e. g. black pastes, developed under specified conditions.

Pigments - Determination of lightening power of white pigments according to the paste method

ASTM C979/C979M-16 整体着色混凝土用颜料的标准规格

1.1 This specification covers the basic requirement for colored and white pigments in powder form to be used as admixtures in concrete for the purpose of producing integrally colored concrete. Where the pigments are a constituent of a multicomponent admixture, this specification applies to the pigment constituent of the admixture. This specification is not intended to establish compatibility of pigments with any other concrete admixtures unless they are tested in combination in accordance with 4.7. 1.2 This specification does not include the determination of pigment stability when elevated temperature using low-pressure (atmospheric) or high-pressure (autoclave) steam is used to accelerate the curing process. 1.3 In addition to tests defining the pigments themselves, a limited number of tests on concrete are included to define the effects on setting times, air content, and compressive strength. If more extensive information is required for a particular job, additional testing criteria and procedures should be agreed upon between the seller and user. 1.4 The maximum prescribed dosage rate of a pigment, established in accordance with 4.7, shall be equal to or less than 10 mass8201;% of cement. When a combination of pigments is used to produce the desired color and color intensity, the total dosage rate of all pigments combined shall not exceed any of the individual maximum dosage rates of the component pigments. 1.5 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. Some values have only SI units because inch-pound equivalents are not used in practice.

Standard Specification for Pigments for Integrally Colored Concrete

BS ISO 18451-1:2015 颜料, 染料和填充剂. 术语. 通用术语

Pigments, dyestuffs and extenders. Terminology. General terms

BS ISO 18473-2:2015 用于特殊应用的功能性颜料和填充剂. 用于防晒品应用的纳米二氧化钛

Functional pigments and extenders for special applications. Nanoscale titanium dioxide for sunscreen application