H60 有色金属及其合金产品综合 标准查询与下载

YS/T 732-2010 一般工业用铝及铝合金挤压型材截面图册

本标准规定了一般工业用铝及铝合金挤压型材的截面图样、参数、代号及质量。 本标准适用于除军工、建筑行业外的一般工业用铝及铝合金热挤压型材。

Drawing of section of extruded aluminium and aluminium alloys profiles for commercial usage

JIS B 7914-2 ERRATUM 2:2010 勘误表

ERRATUM

KS D 0240-2010 有色金属的电阻率和电导率的测定方法

이 표준은 비철 금속재료 중 선을 제외한 판, 띠(strip), 관, 봉, 도체 등의 체적

Measuring methods for electrical resistivity and conductivity of non-ferrous metals

ASTM A401/A401M-10 铬-硅合金钢丝的标准规范

1.1 This specification covers round and shaped chromium-silicon alloy steel spring wire having properties and quality intended for the manufacture of springs resistant to set when used at moderately elevated temperatures. This product is not meant to be used for non-static applications involving moderate fatigue stresses (see Specification A1000) or high cycle fatigue applications (see Specification A877/A877M). This wire shall be provided either in the annealed and cold-drawn or quench and tempered condition as specified by the purchaser. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.2.1 Within the text, the inch-pound units are shown in brackets.

Standard Specification for Steel Wire, Chromium-Silicon Alloy

ASME BPVC Section 2 Part B-2010 ASME锅炉和压力容器规范.第2节:材料.第B部分:有色材料规范

ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part B: Nonferrous Material Specifications

ASTM A1002-10 镍铝有序合金铸件的标准规范

1.1 This specification covers nickel-aluminum ordered alloy castings intended for elevated-temperature applications such as heat-resisting alloy furnace rollers, supports, hangers, and so forth, in environments up to 2300°F (1260°C). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 The SI gage length for tension test specimens is in brackets and is considered standard.

Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

ASTM A1002-10(2015) 镍铝有序合金铸件的标准规格

1.1 This specification covers nickel-aluminum ordered alloy castings intended for elevated-temperature applications such as heat-resisting alloy furnace rollers, supports, hangers, and so forth, in environments up to 2300°F (1260°C). 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.2.1 The SI gage length for tension test specimens is in brackets and is considered standard.

Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

ASTM B422-10 铜铝硅钴合金、铜镍硅锰合金、铜镍硅合金、铜镍铝锰合金以及铜镍锡合金薄板材和带材的标准规范

1.1 This specification establishes the requirements for Copper Alloy UNS Nos. C19002, C19010, C19015, ,C19020, C19025, C63800, C64725, C70250, C70260, C70265, and C70310 sheet and strip. 1.2 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

KS D 3527-2009 混凝土加筋用再生钢棒

이 표준은 콘크리트의 보강에 사용하는 재생 봉강(이하 봉강이라 한다.)에 대하여 규정한다.

Rerolled steel bars for concrete reinforcement

ASME BPVC Section 2 Part B Addenda 2009-2009 ASME锅炉及压力容器规程.第2节:材料.第B部分:非铁材料规范,补遗2009b,2009年7月1日

ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part B: Nonferrous Material Specifications; 2009b Addenda July 1, 2009

ASTM B466/B466M-09 无缝铜镍管的标准规范

1.1 This specification establishes the requirements for seamless copper-nickel pipe and tube in straight lengths, suitable for general engineering purposes. The alloys involved are copper alloys UNS Nos. C70400, C70600, C70620, C71000, C71500, C71520, and C72200. 1.1.1 Copper alloys UNS Nos. C70620 and C71520 are intended for product that will be subsequently welded. 1.2 Units8212;Values stated in inch-pound or SI units are to be regarded separately as standard. Within the text, SI units are shown in brackets. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. 1.3 The following safety hazard caveat pertains only to the test methods described in the Test Methods section of this specification: 1.3.1 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Specification for Seamless Copper-Nickel Pipe and Tube

ASTM B899-09e1 有色金属及合金的相关标准术语

The terms defined in this document are generic in respect to the standards under the jurisdiction of Committee B02 on Nonferrous Metals and Alloys. The same terms may have different definitions in other ASTM technical committees. Some definitions may differ within the committee because of limitations on items such as weights or dimensions. In such cases the terms will be more precisely defined in the Terminology section of the standards in which these terms are used.1.1 To promote precise understanding and interpretation of standards, reports, and other technical writings promulgated by Committee B02. 1.2 To standardize the terminology used in these documents. 1.3 To explain the meanings of technical terms used within these documents for those not conversant with them.

Standard Terminology Relating to Non-ferrous Metals and Alloys

ASTM B428-09(2018) 矩形和方形铜及铜合金管扭转角的标准试验方法

4.1 The rectangular or square copper alloy tube covered by this test method may be used in applications in which control of twist is important to proper fit in final assembly and to minimize rework to bring the tube into compliance. It is recognized that the amount of twist, in degrees per increment of length, can change as a result of the weight of the product and its length during measurement. 4.2 This test method provides a procedure for measuring the twist in square and rectangular copper and copper alloy tubes as a measure of the deviation from straightness. 4.3 This test method allows the purchaser and supplier or manufacturer to inspect square and rectangular copper and copper alloy tube with a standard technique that provides acceptable twist in delivered tubes. 1.1 This test method establishes the requirements for the determination of the angle of twist in rectangular and square copper and copper alloy tube. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

KS D 3533-2008 高压气体容器用钢板和钢带

이 표준은 LP 가스, 아세틸렌, 각종 프레온 가스 등의 고압 가스를 충전시키는 내용적 5

Steel sheets, plates and strip for gas cylinders

KS D 3536-2008 机械结构用不锈钢钢管

이 규격은 기계, 자동차, 자전거, 가구, 기구(器具), 그 밖의 기계 부품 및 구조물에

Stainless steel pipes for machine and structural purposes

KS D 3529-2008 焊接结构用耐候性热轧钢材

이 규격은 교량, 건축, 기타의 구조물에 사용하는 용접성을 고려한 내후성 열간 압연 강재(

Hot-rolled atmospheric corrosion resisting steels for welded structure

JIS B 7914-2 ERRATUM 1:2008 勘误表

ERRATUM

ASME BPVC Section 2 Part B Addenda 2008-2008 ASME锅炉和压力容器规范.第2节:材料.第B部分:有色材料规范.2008a补充件2008年7月1日

ASME Boiler & Pressure Vessel Code - Section 2: Materials - Part B: Nonferrous Material Specifications; 2008a Addenda July 1, 2008

KS D ISO 3134-4:2007 轻金属及其合金.术语和定义.第4部分:铸件

이 규격은 경금속과 경금속 합금으로 주조된 제품의 용어 및 정의에 대하여 규정한다.

Light metals and their alloys-Terms and definitions-Part 4:Castings

KS D 3528-2007 电镀锌冷轧钢板及钢带

이 규격은 전기 아연 도금 강판 및 강대(이하, 판 및 코일이라 한다.)에 대해서 규정한다

Electrolytic zinc-coated steel sheets and coils