J01 技术管理 标准查询与下载

ISO 16792:2006 技术产品文件.数字产品定义数据通则

This International Standard specifies requirements for the preparation, revision and presentation of digital product definition data, hereafter referred to as data sets. It supports two methods of application: model-only, and model and drawing in digital format. Its structure presents requirements common to both methods followed by clauses providing for any essential, differing requirements for each method. Additionally, its use in conjunction with computer aided design (CAD) systems could assist in the progression towards improved modelling and annotation practices for CAD and engineering disciplines, as well as serving as a guideline for IT engineers. The aspects specified in this International Standard refer mainly, but not exclusively, to requirements that differ or are additional to those provided in existing, related standards. Where no such requirements are identified, it is safe to assume that the appropriate existing ISO standards are instead applicable.

Technical product documentation - Digital product definition data practices

DIN 6770:2006 技术产品文件.技术图纸的特征和确认

The standard specifies the identification of characteristics on technical drawings.

Technical product documentation - Identification of characteristics on technical drawings

ISO/TS 16952-1:2006 技术产品文献.参考命名系统.第1部分:一般应用规则

This part of ISO/TS 16952 establishes comprehensive and practice-oriented principles and rules for the designation of technical objects within a system, as well as for the designation of connections, signals and documents in accordance with the corresponding basic standards. The principles of this part of ISO/TS 16952 apply to all technical fields for all industries and can be applied in all phases of the life cycle of a technical object. This part of ISO/TS 16952 serves as the basis for sector-specific parts of ISO/TS 16952 and thus forms the connecting element between them and the basic IEC 61346 series. The designation of types, individuals, cost-centres, projects, etc. is not covered by this part of ISO/TS 16952.

Technical product documentation - Reference designation system - Part 1: General application rules

DIN EN ISO 11442:2006 技术产品文件.文献管理

This standard specifies basic rules for the management of technical documents.

Technical product documentation - Document management (ISO 11442:2006); English version of DIN EN ISO 11442:2006-06

TSG R6004-2006 气瓶充装人员考核大纲

本大纲适用于盛装永久气体（含低温液化气体）、液化气体、溶解乙炔气等气瓶充装单位充装作业人员的考核。

Examination Requirements for Filling Operator of Gas Cylinder

TSG R6003-2006 压力容器压力管道带压密封作业人员考核大纲

本大纲适用于从事运行状态下压力容器、压力管道泄漏带密封作业人员的考核。 带压密封是指利用原密封腔或者新建密封腔，在带温带压流体介质泄漏状态下，通过注入密封剂，实现再密封的技术手段。

Examination Requirements of Online Leak Sealing Operator for Pressure Vessel and Pressure Pipe

TSG G6001-2006 锅炉安全管理人员考核大纲

本大纲适用于《特种设备安全监察条例》规定范围内的锅炉安全管理人员的考核。

Examination Requirements for Safety Administrator of Boiler

JIS C 0457:2006 说明书的编制.结构、内容和表达方式

この規格は，乾電池のような小さくて簡単な製品から，大規模電気工業設備のような大形又は高度に複惟な製品に至ろまで，電気及び関連分野におけろあらゆろ種類の製品にとって必要又は有用であるすべての種類の取扱説明に関する立案と定式化とについて，一般原則及び詳細な要求事項を規定するものである。この規格が想定している主たる使用者とは，次のとおりである—製品の製造業者，テクニカルライタ，テクニカルイラストレータ，ソフトウェア設計者，翻訳者，又はその他の取扱説明の企画立案及び起草作業にかかわる者—製品の設置又は使用国における製品の製造業者の正式な代表者この規格は，製品供給者と顧客との間の契約交渉でも有用である。この規格は，製品とともに提供しなければならない文書の固定した内容を規定するものではない。この規格はあらゆる種類の製品に通用する必要があるが，文書の内容は製品の複雑さに非常に大きく依存するため，固定した内容を規定すろことは，明らかに不可能である。そのため，この規格は考え得るあらゆる種類の取扱説明を列挙している。この規格が標準化しようとしているものは，“こうした取扱説明をどのように作成するか"でもある。

Preparation of instructions -- Structuring, content and presentation

ISO 11442:2006 技术产品文件.文献管理

This International Standard specifies basic rules for the management of technical documents.

Technical product documentation - Document management

DIN-Fachbericht 146:2006 技术产品文件.设备说明.单个组件说明中编辑信息的指南

The subcommittee NATG-F.1.5 provides rules on basis of existing laws, standards, guidelines and consumer experience for a summary of informations of single instructions to get a general instruction for systems and plants. The result shall be a working paper that will flow into national and international standardization.

Technical product documentation - instructions for plants - Guidelines for compiling information from instructions for individual components

TSG ZF002-2005 安全阀维修人员考核大纲

本大纲适用于从事锅炉、压力容器（不含气瓶）、压力管道安全阀维修作业人员（以下简称维修人员）的考核。

Examination Requirements for Safety Valve Maintenance Personnel

DIN 32869-1:2005 技术产品文件.三维CAD(计算机辅助设计)模型.第1部分:表示要求

The document establishes the depiction of three dimensional CAD-models or parts of them such as standard or repetition parts. Scopes and degrees of details are defined.

Technical product documentation - Three-dimensional CAD-models - Part 1: Requirements for representation

KS B ISO 1505:2005 纺织机械.染整机器宽度.公称宽度的定义和系列

이 규격은 필수적인 치수의 명확화를 위하여 염색 및 후가공기에 관련되는 중요한 폭을 순차적

Textile maxhinery-Widths relating to dyeing and finishing machines- Definitions and range of nominal widths

IEC PAS 62400:2005 技术产品和技术产品文件的构架原则.字母代码.按目的和任务划分的对象主类和细类

This PAS extends the letter codes of the main classes for purposes or tasks of objects in accordance with IEC 61346-2, Table 1, with a second-letter code for subclasses. These specifications are generally applicable. They apply equally for all disciplines, such as construction, process and electrical engineering, and for standards, for example, for power generation, power distribution, process engineering facilities, naval architecture and ocean engineering. Additional letter codes may be specified for further subdivision of the classes. Specification of letter codes for the main and subclasses for infrastructure objects in accordance with IEC 61346-2, Table 2, are not part of this document.

Structuring principles for technical products and technical product documentation - Letter codes - Main classes and subclasses of objects according to thier purpose and task

DIN 6789-7:2005 文献的分类管理.第7部分:数字产品数据发布过程的质量标准

This standard applies for quality criteria for releases in technical product documentations and objects described herewith.

Systematic arrangement of documents - Part 7: Quality criteria for the release process of digital product data

JIS C 0451:2004 工厂、系统和设备用文件的分类及标识

この規格は，文書の分類及び指定に関する指針を与え，例えぱ，システム及び装置をもつプラントのような，主として大規模な設備に求められる構造化文書を作成するための基本的な基準について規定する。また，すべての技術分野に適用し，文書化及び文書システムの次への発展につなげるものである。さらに.この規格は，文書化の分野でコミュニケーションとしての用途及び文書の識別に適用する:この規格の適用範囲は.エンジニアリング過程の間に伴う技術分野以外の文書も合む。

Classification and designation of documents for plants, systems and equipment

JBJ 35-2004 机械工业建设工程设计文件深度规定

The regulations to compile the documents of construction engineering design of machinery industry

KS B ISO 1506:2004 纺织机械.染色、整理和有关机械.分类和名称

이 규격은 표백, 염색, 날염, 가공에 사용되는 기계와 장치의 분류법 및 명칭에 대하여

Textile machinery-Dyeing, finishing and allied machinery-Classification and nomenclature

KS A ISO 16016:2003 技术产品文件.文献和产品使用限制的保护通告

이 규격은 문서와 제품의 용도가 제한되는 곳에 부적절하게 사용되는 것을 막기 위한 보안

Technical product documentation-Protection notices for restricting the use of documents and products

KS A ISO 15226:2003 技术产品文件.生命周期模型和文件分配

이 규격은 유연한 수명 주기 모델을 확립하는 방법을 제공하고 제품 수명 주기 동안 기술

Technical product documentation-Life cycle model and allocation of documents