J17 齿轮与齿轮传动 标准查询与下载

ANSI/AGMA ISO 17485-A:2008 伞形齿轮.ISO精密系统

Bevel Gears - ISO System of Accuracy

ANSI/AGMA ISO 6336-6-A:2008 直齿轮和斜齿轮承载能力的计算.第6部分:变化负荷下工作寿命计算

Calculation of Load Capacity of Spur and Helical Gears - Part 6: Calculation of Service Life Under Variable Load

ANSI/AGMA 6033-2008 船舶推进齿轮装置.第1部分:材料

Identifies commonly used alloy steels, heat treatment and inspection requirements for through hardened, case hardened and surface hardened gearing for main propulsion marine service over 1500 horsepower. Mechanical, metallurgical and nondestructive test requirements are provided for various heat treat processes and metallurgical quality grades of gearing.

Marine Propulsion Gear Units, Part 1 - Materials

CGMA 1001.C01-2007 CK系列斜齿轮-圆锥齿轮减速箱

CK series helical-bevel gearbox

CGMA 1001.B01-2007 CF系列平行轴斜齿轮减速箱

CF series parallel shaft helical gearbox

KS B ISO 10828:2007 蜗轮.蜗轮齿廓的几何形状

이 규격에서는 1997년까지 가장 보편적인 5가지 형태의 웜 나사 치형 및 축 방향 치형의

Worm geras－Geometry of worm profiles

BS ISO 21771:2007 齿轮.圆柱渐开线齿轮和齿轮副.概念和几何学

ISO 21771:2007 specifies the geometric concepts and parameters for cylindrical gears with involute helicoid tooth flanks. Flank modifications are included. It also covers the concepts and parameters for cylindrical gear pairs with parallel axes and a constant gear ratio, which consist of cylindrical gears according to it. Gear and mating gear in these gear pairs have the same basic rack tooth profile.

Gears - Cylindrical involute gears and gear pairs - Concepts and geometry

ANSI/AGMA 1103-2007 细距正齿轮和斜齿轮传动装置的齿轮齿比例(米制版)

Tooth proportions for fine-pitch gearing are similar to those of coarse pitch gearing, except in the matter of clearance. For 20 degree profile angle fine-pitch gearing, this standard provides a system of enlarged pinions which use the involute form above 5 degrees of roll. Data for 14-1/2 and 25 degree profile angle systems are included in annexes. Metric version of AGMA 1003-HXX.

Tooth Proportions for Fine-Pitch Spur and Helical Gearing (Metric Edition)

ANSI/AGMA 1003-2007 细距正齿轮和斜齿轮传动装置的齿轮齿比例

Tooth proportions for fine-pitch gearing are similar to those of coarse pitch gearing except in the matter of clearance. For 20 degree profile angle fine-pitch gearing, this standard provides a system of enlarged pinions which use the involute form above 5 degrees of roll. Data on 14-1/2 and 25 degree profile angle systems are included in the annexes.

Tooth Proportions for Fine-Pitch Spur and Helical Gearing

ISO 21771:2007 齿轮.圆柱渐开线齿轮和齿轮副.概念和几何学

This International Standard specifies the geometric concepts and parameters for cylindrical gears with involute helicoid tooth flanks. Flank modifications are included. It also covers the concepts and parameters for cylindrical gear pairs with parallel axes and a constant gear ratio, which consist of cylindrical gears according to it. Gear and mating gear in these gear pairs have the same basic rack tooth profile. The equations given are not restricted to the pressure angle, 20 . P α = ° The standard is structured as follows. - Listing of symbols and nomenclature for a unique description of gears and gear pairs (see Clause 3). - Equations and explanations of the relevant values for defining a cylindrical gear and its tooth system. The equations for determination of the nominal values for zero-deviation gear description parameters are stated for radial tooth dimensions (gear tooth heights), the distance between flanks of the same hand, the distance between flanks of opposite hand, as well as the tooth flank characterizing parameters (see Clause 4). - Equations and explanations of the relevant values for defining cylindrical gear pairs. The equations for the essential parameters characterizing the engagement conditions of the unloaded gear pair are listed (see Clause 5). - Equations and suggestions for desired flank modifications (see Clause 6). - Concepts and recommendations needed for a unique geometrical definition of the intended results from manufacture (Clause 7). - Equations for determination of the nominal values or the limiting values for the most used inspection methods for tooth thickness (see Annex A).

Gears - Cylindrical involute gears and gear pairs - Concepts and geometry

KS B ISO 677:2007 通用机械和重型机械直齿伞齿轮.基本齿条

이 규격은 일정한 이뿌리 틈새를 가진 산업용(일반용 및 고하중용 등) 직선 베벨 기어의 기

Straight bevel gears for general engineering and heavy engineering-Basic rack

ISO 6336-6:2006/cor 1:2007 正齿轮和斜齿轮荷载能力的计算.第6部分:可变荷载下使用寿命的计算.技术勘误1

This standard is Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load; Technical Corrigendum 1

Calculation of load capacity of spur and helical gears - Part 6: Calculation of service life under variable load; Technical Corrigendum 1

KS B ISO 678:2007 通用机械和重型机械直齿伞齿轮.齿数和径节

이 규격은 산업용(일반용 및 고하중용 등) 직선 베벨 기어의 모듈 및 다이어미트럴 피치에

Straight bevel gears for general engineering and heavy engineering-Modules and diametral pitches

KS B ISO 6336-2:2007 直齿轮和斜齿轮承载能力的计算.第2部分:齿轮表面耐用能力的计算

이 규격은 인벌류트 치형을 가진 외접 및 내접 원통 기어의 치면 부하 용량을 결정하는 데

Calculation of load capacity of spur and helical gears-Part 2:Calculation of surface durability(pitting)

JB/T 5664-2007 重载齿轮 失效判据

本标准规定了圆周速度υ≤20m/s的重载（用于传递动力）齿轮的磨损、点蚀、剥落、胶合、塑变、折断与裂纹的失效判据。 本标准主要用于判断经运转并已出现损伤的重载齿轮是否达到失效的程度。 本标准不适用于可靠度、振动或噪声有特殊要求的重载齿轮的失效判据，也不适用于重载齿轮制造和台架试验合格与否的判据。

Heavy duty gear Invalidation criterion

DIN ISO 14635-1 Berichtigung 1:2007 齿轮.FZG试验规程.第1部分:有关齿轮咬接油的载重量的FZG试验方法A/8,3/90

DIN ISO 14635-1 describes a test method based on an FZG four-square test machine to determine the relative load carrying capacity of lubricating oils defined by the gear surface damage known as scuffing. High surface temperatures due to high surface pressures and sliding velocities can initiate the breakdown of the lubricant films. This test method can be used to assess such lubricant breakdown under defined conditions of temperature, sliding velocity and load. The FZG test method A/8,3/90 for relative scuffing load carrying capacity of oils is typical for the majority of applications in industrial and marine gears.

Gears - FZG test procedures - Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils (ISO 14635-1:2000), Corrigenda to DIN ISO 14635-1:2006-05

KS B ISO 6336-1:2006 直齿轮和斜齿轮承载能力的计算.第1部分:基本原则、引言和一般影响因素

1.1 사용 목적 이 규격의 제1부는 제2, 3, 5부와 함께 여러 가지 기어 설계를 비교

Calculation of load capacity of spur and helical gears-Part 1:Basic principles, introduction and general influence factors

KS B ISO 10347:2006 涡轮.涡轮的几何形状.涡轮装置的铭牌、中心锯齿、购买者须提供的信息

이 규격은 웜 기어 장치용 명판에 대한 요구사항과 그 중심거리 선택에 대한 권장 및 적절

Worm gears－Geometry of worms－Name plates for worm gear units, centre distances, information to be supplied to gear manufacturer by the purchaser

KS B ISO 6336-3:2006 直齿轮和斜齿轮承载能力的计算.第3部分:轮齿弯曲强度的计算

이 규격은 기어 이의 이뿌리 아래의 최소 림 두께가 SR ≥ 3.5 mn인 인벌류트 치형의

Calculation of load capacity of spur and helical gears-Part 3:Calculation of tooth bending strength

BS ISO 23509:2006 伞形和准双曲面齿轮几何学

ISO 23509:2006 specifies the geometry of bevel gears. The term bevel gears is used to mean straight, spiral, zerol bevel and hypoid gear designs. If the text pertains to one or more, but not all, of these, the specific forms are identified. ISO 23509:2006 is intended for use by an experienced gear designer capable of selecting reasonable values for the factors based on his knowledge and background. It is not intended for use by the engineering public at large.

Bevel and hypoid gear geometry