J26 弹簧 标准查询与下载
共找到 441 条与 弹簧 相关的标准，共 30 页
本标准规定了船用小型电气设备用弹簧减震器(以下简称减震器)的分类和标记、要求、试验方法、检验规则、包装、运输和贮存。本标准适用于安装灯具等小型电气设备用减震器的设计、制造和验收。
Spring shock absorbers for marine small electric equipment
- ICS
- 47.020.60
- CCS
- J26
- 发布
- 2013-10-17
- 实施
- 2014-03-01
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1: compression springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-10-04
- 实施
- 2013-10-04
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: extension springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-09-14
- 实施
- 2013-09-14
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs; German version EN 13906-2:2013
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-09
- 实施
Cylindrical helical springs made from round wire and bar. Calculation and design. Compression springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-07-31
- 实施
- 2013-07-31
Cylindrical helical springs made from round wire and bar. Calculation and design. Extension springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-07-31
- 实施
- 2013-07-31
This European Standard specifies the calculation and design of cold and hot coiled cylindrical helical compression springs with a linear characteristic, made from round wire and bar of constant diameter with values according to Table 1, and in respect of which the principal loading is applied in the direction of the spring axis.
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 1 : Compression springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-07-01
- 实施
- 2013-07-01
本标准规定了压水堆核电厂用镍-铬-铁合金弹簧丝的制造、化学成分、力学性能和工艺性能、金相组织、表面质量和尺寸、外形、质量及允许偏差等技术要求。本标准适用于压水堆核电厂控制棒组件、堆内构件和驱动机构用直径小于等于8 mm的镍-铬-铁合金弹簧丝。
Additional materials for Pressurized water reactor nuclear power plants.part 14: Nickel-chromium-iron alloy wires of springs
- ICS
- 77.140.25
- CCS
- J26
- 发布
- 2013-06-08
- 实施
- 2013-10-01
This European Standard specifies the calculation and design of cold and hot coiled helical extension springs made from round wire and bar, loaded in the direction of the spring axis and operating at normal ambient temperatures (see Table 1, Scope).
Cylindrical helical springs made from round wire and bar - Calculation and design - Part 2: Extension springs
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-06-01
- 实施
- 2013-06-01
This International Standard specifies general principles for the creation of symbols of physical quantities, coefficients, and parameters for metal springs. It specifies the presentation of basic characters, subscripts, and application symbols for use in the field of helical compression springs, helical extension springs, helical torsion springs, flat springs, and leaf springs with attention to technical product documentation, especially for describing and ordering.
Springs - Symbols
- ICS
- 01.060;01.100.20;21.160
- CCS
- J26
- 发布
- 2013-04
- 实施
Disc springs.Quality specifications.Dimensions
- ICS
- 21.160
- CCS
- J26
- 发布
- 2013-02
- 实施
Hot formed helical compression springs. Technical specifications
- ICS
- 21.160
- CCS
- J26
- 发布
- 2012-05-31
- 实施
- 2012-05-31
This standard specifies the terms for springs(hereafter referred to as "terms").
Springs -- Vocabulary
- ICS
- 01.040.01;01.040.21;01.110;21.060
- CCS
- J26
- 发布
- 2012-05-21
- 实施
This International Standard specifies the materials, shapes, spring characteristics, tolerances, manufacturing requirements and test methods for common helical compression springs, which are made from hot coiled round section steel bar, and then quenched and tempered (hereinafter simply “springs”). The following limit values apply to springs conforming to this International Standard: — free length: ≤ 900 mm; — spring index: 3 to 12; — slenderness ratio: 0,8 to 4; — active coils: ≥ 3; — spring pitch: < 0,5D; — wire diameter: 8 mm to 60 mm; — mean diameter of coil: ≤ 460 mm. This International Standard is not applicable to coil springs with special performance requirements, such as railway and automotive suspensions.
Hot formed helical compression springs - Technical specifications
- ICS
- 21.160
- CCS
- J26
- 发布
- 2012-04
- 实施
本标准规定了油封弹簧的术语和定义、弹簧结构及规格型号、技术要求、试验方法、检验规则及包装、标志、运输和贮存。本标准适用于安徽省内油封弹簧的生产。
Oil seal spring
- ICS
- 21.160
- CCS
- J26
- 发布
- 2011-04-21
- 实施
- 2011-05-21
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn and solution treated wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
- ICS
- 49.025.99
- CCS
- J26
- 发布
- 2011-01-31
- 实施
- 2011-01-31
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
- ICS
- 49.025.99
- CCS
- J26
- 发布
- 2011-01-31
- 实施
- 2011-01-31
