J36 热处理 标准查询与下载

SAE AMS2771B-2000 铝合金铸件的热处理

The specification covers the engineering requirements for heat treatment of aluminum alloy castings and for parts machined from castings.

Heat Treatment of Aluminum Alloy Castings

SAE AMS3025B-2000 聚链烷乙二醇热处理淬火

This specification covers two types of polyalkylene glycol in the form of a liquid. This product has been used typically as a quenching medium for solution heat treatment of aluminum alloys to minimize distortion and reduce residual stresses.

Polyalkalene Glycol Heat Treat Quenchant

SAE AMS2759C-2000 钢部件热处理的一般要求

This specification establishes general requirements for the processes listed in 3.3.1 for heat treatment of steel parts (See 8.2.1) by users or their vendors or subcontractors. Reference to AMS 2759 on a drawing, fabrication order, purchase order, etc constitutes a requirement to conform to the applicable provisions of the documents listed in 3.3.1 for the hear treatment of steel parts of the particular alloy described. Parts made from steels orther than those specified in the detail specifications may be heat treated in accordance with the applicable requirements using processing temperatures, times, and other parameters recommended by the material producer unless otherwise specified by purchaser. The conditions (temperatures, soaking times, cooling rates, etc) used by material producers, forge shops, and foundries for qualification of response to heat treatment of their products shall conform to the requirements of the specifications listed in 3.3.1. Heat treatment of raw material by raw material producers, forge shops, or foundries should be in accordance with the material procurement specification. Processes such as vacuum-furnace heat treating, flame hardening, induction through-hardening, austempering, martempering, and hot oil quenching are recognized heat treating processes, but their requirements are not completely covered by this specification.

Heat Treatment of Steel Parts General Requirements

BS EN 746-4:2000 工业热处理设备.热浸电镀热处理设备的特殊安全性要求

This part of EN 746 gives the specific hazards and safety requirements that shall be provided by the manufacturer for hot dip industrial batch and the bath of continuous galvanizing thermoprocessing equipment, whether it is used as an independent unit or an integrated part of a plant. This part of EN 746 does not deal with the risks arising from any component handling equipment for the dip process or for the associated protective measures. This part of EN 746 does not cover the handling, storage, transport, disposal, transfer or regeneration of the zinc and the processed material outside the limits of the equipment. This part of EN 746 applies not only to the normal operation of the equipment but also to the safety of personnel and property in the event of abnormal operation and when foreseeable faults occur. Examples of hot dip galvanizing equipment are shown in Figure 1 and Figure 2. NOTE: There are many variations in the design of galvanizing equipment. Only two examples of the various types are given in this text.

Industrial thermoprocessing equipment - Particular safety requirements for hot dip galvanizing thermoprocessing equipment

JB/T 10175-2000 热处理质量控制要求

本标准规定了热处理的人员、作业环境、设备及仪表、工艺材料、工艺、技术文件与资料等质量控制的基本要求。 本标准适用于热处理文件的编制、生产过程质量控制、技术改造和规划设计。

Quality control requirement for heat treatment

JIS G 0201:2000 钢铁用术语汇编(热处理)

この規格は，圧延，鋳造又は鍛造された鋼の熱処理に関する主な用語と，その定義について規定する。

Glossary of terms used in iron and steel (Heat treatment)

DIN 17022-5:2000 钢铁材料热处理.热处理方法.第5部分:表面淬火

The document describes methods of heat treatment and gives notices for surface hardening treatment.

Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening

DIN 17023:2000 黒色金属热处理.(WBA)表格.热处理顺序

The document contents a order for heat treatment with forms for heat treatment of ferrou material components and tools.

Heat treatment of ferrous metals - (WBA) Forms - Heat-treatment order

ISO 642:1999 钢 末端淬透性试验(乔米尼(Jominy)试验)

本标准规定用末端淬火试验方法（Jominy试验)测定钢的淬透性，试验时采用直径为25 mm，长为 100 mm的试样。 注：通过协商，对某一规定的应用范围．可采用已认可的数学模型(见附录C)进行Jominy曲线计算柬替代本标准中 所叙述的末端淬火试验；如对结果有异议，应进行末端淬火试验。

Steel - Hardenability test by end quenching (Jominy test)

DIN 30950:1999 熔化淬火.方法的概要说明

The document describes the method for surface layer fusion hardening.

Fusion hardening - General description of method

DIN 30960:1999 用附加材料的熔化淬火.熔化淬火规范.表格纸

The document lays down an blank for surface layer fusion specification.

Fusion hardening with additional materials - Specification for fusion hardening (SHA) - Form sheet

JB/T 9198-1999 盐浴硫氮碳共渗

本标准规定了盐浴硫氮碳共渗工艺、设备和共渗层质量检验方法。适用于碳素结构钢、合金结构钢、模具钢、高速钢、不锈钢、耐热钢和铸铁制成的工件及刃具、模具。 本标准不适用于回火温度低于510℃(共渗温度下限)的工件。

Salt bath sulpho nitrocarburizing

JB/T 9202-1999 热处理用盐

Salts for heat treatment

JB/T 4155-1999 气体氮碳共渗

　　本标准规定了气体氮碳共渗的工艺、质量检验和安全要求。

Gas nitrocarburzong

JB/T 4393-1999 聚乙烯醇合成淬火剂

　　本标准规定了聚乙烯醇合成淬火剂的技术条件。 本标准适用于钢铁制件淬火冷却用的有机物水溶性淬火介质——以聚乙烯醇为主要成分的合成淬火剂。

Polyvinyl alcohol of quenching media

JB/T 4392-1999 有机物水溶性淬火介质性能测定方法

　　本标准规定了有机物水溶性淬火介质性能测定方法。 本标准适用于有机物水溶性淬火介质技术性能的测定。

Test method of characteristics on polymer quenchants

JB/T 3999-1999 钢件的渗碳与碳氮共渗淬火回火

　　本标准规定了钢件的渗碳与碳氮共渗淬火回火的常用钢种、设备、工艺、质量检验及检验设备。 　　本标准适用于钢件的渗碳与碳氮共渗淬火回火处理。

Carburizing or carbonitriding and post - quenching and tempering of steel part

JB/T 4390-1999 高、中温热处理盐浴校正剂

　　本标准规定了高、中温热处理盐浴校正剂的一般要求、检验规则、试验方法、仲裁方法及包装、标志、贮存和运输。 本标准主要适用于热处理高温中性盐浴（工作温度1000～1350℃）和中温中性盐浴（工作温度700～1000℃）校正剂。

High and medium tempereture salt bath rectifier

JB/T 4202-1999 钢的锻造余热淬火回火处理

　　本标准规定了钢的锻造余热淬火回火处理的工艺、质量检验。 本标准主要适用于结构钢锻造余热淬火回火处理，也适用于轴承钢和工具钢等钢种作为预备热处理的锻造余热淬火回火处理。

Ansforging and tempering of steel

JB/T 8929-1999 深层渗碳

本标准规定了深层渗碳材料、工艺、设备、质量检验及安全技术等基本要求。 本标准适用于工件深层渗碳处理。

Deep carbuizing