J36 热处理 标准查询与下载

JB/T 7711-2007 灰铸铁件热处理

本标准规定了灰铸铁件的热处理设备、工艺及品质检验方法。 本标准适用于灰铸铁件的退火、正火、回火及等温淬火热处理工艺。

Heat treatment of grey cast iron

JB/T 7713-2007 高碳高合金钢制冷作模具显微组织检验

本标准规定了高碳高合金钢制冷作模具经淬火回火后碳化物、马氏体和晶粒度的评定方法及级别。 本标准适用于Cr12型和W6Mo5Cr4V2等钢制冷作模具的显微组织检验。

Metallographic examination method of high-carbon high-alloy cold-work tool steel

JB/T 9201-2007 钢铁件的感应淬火回火

本标准规定了钢铁件表面感应淬火回火质量控制及安全卫生及劳动保护的基本要求。 本标准适用于钢铁件表面感应淬火及随后回火的热处理工艺。

Induction hardening and tempering of iron and steel parts

ANSI/AWS C4.4/C4.4M:2007 用含氧可燃气体喷灯加热成形和矫直的推荐实施规程

This second edition of Recommended Practices for Heat Shaping and Straightening covers the shaping of metal products by prudent use of heat to obtain a desired configuration. The text reviews the theory and analytical calculations that explain how heat shaping and straightening occurs. Sample calculations and tables are presented for typical materials. General heating patterns and heat shaping and straightening techniques are discussed. Specific heating applications are illustrated for various sections.

Recommended Practices for Heat Shaping and Straightening with Oxyfuel Gas Heating Torches

JB/T 6050-2006 钢铁热处理零件硬度测试通则

本标准钢铁热处理零件硬度测试方法与硬度计选择、测试结果的判定、仲裁及测试报告。 本标准适用于钢铁热处理零件在室温环境中硬度的测试。

Generalization of hardness test for heat treated iron and steel parts

ASTM B807/B807M-06 铝合金用挤压机固溶热处理标准规程

1.1 This practice establishes the controls required for extrusion press solution heat treatment of the 6xxx and 7xxx series aluminum alloys in when ASTM material specifications allow use of this process in lieu of furnace solution heat treatment. For the alloys listed in , this practice is an alternate process to solution heat treatment in a furnace, such as specified in Practice B 918 for the attainment of T3, T4, T6, T7, T8 and T9-type tempers (see ANSI H35.1).1.2 This practice applies only to extrusion press solution heat treatment for aluminum alloys. Precipitation hardening (aging) processing and equipment calibration shall meet the practice and requirements of Practice B 918.1.3 The values stated in either inch-pound units or SI units are to be regarded separately as standards. The SI units are shown in brackets or in separate tables. The values stated in each system are not exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the practice.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

JB/T 10448-2005 钢铁构件固体渗铝工艺及质量检验

本标准规定了钢铁构件粉末包埋渗铝和膏剂感应渗铝的原材料、工艺流程、工艺方法、质量要求、检验方法。 本标准适用于碳素钢、合金钢构件及铸铁构件的表面渗铝及其质量检验。

Solid aluminizing process and quality inspection of iron and steel parts

JB/T 9202-2004 热处理用盐

本标准规定了热处理用盐(无水氯化钡、氯化钾、氯化钠、硝酸钾、硝酸钠、亚硝酸钠)的技术要求、检验方法、检验规则以及包装、标志、贮存和运输等。 本标准适用于热处理加热和冷却盐浴用盐。

Salt intended to be used in heat treatment

JB/T 7951-2004 测定工业淬火油冷却性能的镍合金探头实验方法

本标准规定了使用镍合金探头测定工业淬火油冷却性能的实验室方法。测试在静态油中进行，这样就可以在标准条件下对不同油品的冷却性能进行分类。这种实验结果与具有不同程度搅拌作用的工业淬火设备淬火速度之间的相关性还没有建立。

Industrial quenching oil-Determination of cooling characteristics-Nickel-alloy probe test method

JB/T 6048-2004 金属制件在盐浴中的加热和冷却

本标准规定了对盐溶加热和冷却设备、盐浴成分和性质、加热和冷却工艺操作、安全卫生事项及对环境影响等方面的要求。 本标准适用于金属制件在中性盐浴或硝盐浴中的加热和冷却。

Heating and Cooling in Salt Bath for Metallic Components

ASTM D3520-04 热处理液体淬火时间的标准试验方法(磁性冷却速度试验器法)

The results obtained by the test method described are useful as guides in selecting fluids with respect to quenching speed characteristics desired for metal quenching applications. Note 38212;Although this test method has been found useful for some water-based fluids, the statistical significance of the test has been established only by round-robin testing of petroleum-based fluids. These results will provide a measure of quenching speed (cooling rate) from approximately 885°C (1625°F) to 354°C (670°F) and are not directly proportional to hardness obtainable on metals quenched therein as many other factors are involved in the quenching process in actual plant operation with production parts. Note 48212;Test Method D 6200 describes the equipment and procedure for characterizing the time-temperature performance of a quenching oil through the entire cooling process. FIG. 1 Magnetic Quenchometer FIG. 2 Test Sequence in Beaker1.1 This test method covers a procedure for making a comparative evaluation of the quenching speed characteristics of petroleum fluids used in the quenching of metals by means of the Magnetic Quenchometer.Note 18212;A comparison method for testing the hardenability of steel is Test Method A 255.Note 28212;An additional comparison method for evaluation of the quenching speed characteristics of petroleum fluids used in the quenching of metals is Test Method D 6200.1.2 This test method provides a measure of changes in oil chemistry due to contamination, base oil degradation, and additive drag-out during use. This test measures changes in the quenching speed characteristics of petroleum fluids at the high temperature (>354176;C). This test method does not reliably predict metallurgical performance.1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method)

JIS B 6914:2002 钢铁的碳化、氰化、淬火和回火处理

この規格は，鉄鋼を浸炭及び浸炭窒化し，焼入焼戻しする加工（以下，加工という。）について規定する。備考この規格は，鋳鉄には適用しない。

Process of carburizing and carbonitriding, quenching and tempering of iron and steel

JIS B 6912:2002 钢铁的感应淬火和回火处理

この規格は，鉄鋼の高周波焼入焼房し加工又は高周波焼入れ加工(以下，加工という。)につて規定する。

Process of induction hardening and tempering of iron and steel

DIN 6773:2001 钢铁材料热处理.热处理件.图样画法及标注.

Heat treatment of ferrous metals - Heat treated parts, presentation and indications on drawings

ASME 2356-2001 较低P-编号材料的P-No.5A管子件和与头球焊接在一起的管道用焊后热处理要求的替代规则.第1节(已作废)(补充件12)

Alternative Rules for Potweld Heat Treatment Requirements for P-No. 5A Tubes and Pipes Welded to Headers of Lower P-Number Material Section 1 (ANNULLED) (SUPP 12)

Alternative Rules for Potweld Heat Treatment Requirements for P-No. 5A Tubes and Pipes Welded to Headers of Lower P-Number Material Section 1 (ANNULLED) (SUPP 12)

ASME 2400-2001 翅片管焊后热处理用替代规则.第VIII节,第1部分.补充件8&9

Alternative Rules for the Postweld Heat Treatment of Finned Tubes Section VIII, Division 1 SUPP 8&9

Alternative Rules for the Postweld Heat Treatment of Finned Tubes Section VIII, Division 1 SUPP 8&9

SAE AMS2745-2001 钢零件的感应淬火

This specification defines the requirements for locally hardening steel parts by the induction hardening method. This procedure has been used typically to harden local areas of parts without heating the entire part to hardening temperatures or to harden a local area of a part to a higher hardness than surrounding areas for increased wear or strength, often at the expense of other characteristics such as toughness, but usage is not limited to such applications.

Induction Hardening of Steel Parts

ASTM D6666-01a 评价含水聚脂淬火剂的标准指南

1.1 This guide provides information, without specific limits, for selecting standard test methods for testing aqueous polymer quenchants for initial qualification, determining quality, and the effect of aging.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluation of Aqueous Polymer Quenchants

ASTM D6666-01 评价含水聚脂淬火剂的标准指南

1.1 This guide provides information, without specific limits, for selecting standard test methods for testing aqueous polymer quenchants for initial qualification, determining quality, and the effect of aging.1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use.

Standard Guide for Evaluation of Aqueous Polymer Quenchants

ASME 2215-2001 翅片管焊后热处理用替代规则.第I节;已作废.(补充件11)

Alternative Rules for the Postweld Heat Treatment of Finned Tubes Section I; ANNULLED; (SUPP 11)

Alternative Rules for the Postweld Heat Treatment of Finned Tubes Section I; ANNULLED; (SUPP 11)