J50 机床综合 标准查询与下载

ISO 14955-2:2018 机床.机床的环境评估.第2部分:测量提供给机床和机床部件的能量的方法

This document describes how measurements are made by providing measuring methods in order to produce reproducible data about the energy supplied to a machine tool under specified conditions. Furthermore, it provides methods to quantify the energy supplied to components in order to assign their share to generalized machine tool functions as described in ISO 14955-1. It supports the energy-saving design methodology according to ISO 14955-1 by providing measuring methods for the energy supplied to machine tools. The assignment of the energy supplied to machine tool functions requires measurements at machine tool component level. These measurements need to be reproducible and independent of conditions other than those being recorded and documented. The results of the measurements are intended to document improvements to the design, specifically under energy aspects, and/or to allow evaluating the energy involved in the manufacturing of a given part by a given machine tool. Any comparison requires identical conditions and ensures by specification and measurement that similar results are achieved.

Machine tools - Environmental evaluation of machine tools - Part 2: Methods for measuring energy supplied to machine tools and machine tool components

JB/T 12991-2018 机床电气设备及系统 金属带锯床能效等级及评定方法

Machine Tool Electrical Equipment and Systems Metal Band Sawing Machine Energy Efficiency Rating and Assessment Method

NF E63-026-1*NF EN ISO 16092-1:2018 机床安全性.压力机.第1部分:一般安全要求

Le présent document spécifie les exigences techniques de sécurité et les mesures que doivent prendre ceux qui conçoivent, fabriquent et fournissent des presses destinées à traiter le métal à froid ou un matériau constitué en partie de métal à froid.Il liste les phénomènes dangereux significatifs et donne les prescriptions et mesures de sécurité.La présente partie donne les exigences communes à tous types de presses. Elle est à utiliser conjointement avec une au moins des autres parties de la norme, dédiées chacune à un type de presses (mécaniques, hydrauliques, pneumatiques, électriques...) .Le présent document est destiné à donner les moyens de se conformer aux exigences de la Directive "Machines" 2006/42/CE (voir Annexe ZA) .

Machine tools safety - Presses - Part 1 : general safety requirements

ISO 16092-1:2017 机床安全性.压力机.第1部分:一般安全要求

This document specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of presses which are intended to work cold metal or material partly of cold metal, but which can be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather, etc.). NOTE 1 The design of a machine includes the study of the machine itself, taking into account all phases of the “life” of the machine mentioned in ISO 12100:2010, 5.4, and the drafting of the instructions related to all the above phases. The requirements in this document take account of intended use, as defined in ISO 12100:2010, 3.23, as well as reasonably foreseeable misuse, as defined in ISO 12100:2010, 3.24. This document presumes access to the press from all directions, deals with all significant hazards during the various phases of the life of the machine described in Clause 4, and specifies the safety measures for both the operator and other exposed persons. NOTE 2 All significant hazards means those identified or associated with presses at the time of the publication of this document. This document applies to presses which can function independently and can also be used as a guide for the design of presses which are intended to be integrated in a manufacturing system. The covered presses transmit force mechanically to cut, form, or work cold metal or other sheet materials by means of tools or dies attached to or operated by slides/ram in range in size from small high speed machines with a single operator producing small workpieces to large relatively slow speed machines with several operators and large workpieces. This document does not cover machines whose principal designed purpose is: a) metal cutting by guillotine; c) bending or folding by press brakes or folding machines; e) turret punch pressing; b) attaching a fastener, e.g. riveting, stapling or stitching; d) straightening; f) extruding; g) drop forging or drop stamping; h) compaction of metal powder; i) j) single purpose punching machines designed exclusively for profiles, e.g. used in the construction industry; spot welding; k) tube bending;  1  l) working by pneumatic hammer. This document does not cover hazards related to the use of presses in explosive atmospheres. This document covers the safety requirements related to the use of programmable electronic systems (PES) and programmable pneumatic systems (PPS). This document is not applicable to presses which are manufactured before the date of its publication. This document deals with the common significant hazards, hazardous situations and events relevant to presses and ancillary devices which are intended to work cold metal or material partly of cold metal (see Clause 4). This document defines the common safety requirements for presses defined in this clause and shall be used in connection with other parts of the ISO 16092 series. Specific hazards which are related to the type presses used are dealt with in ISO 16092-2, ISO 16092-3

Machine tools safety - Presses - Part 1: General safety requirements

ISO 14955-1:2017 机床.机床的环境评估.第1部分:节能机床的设计方法

This document constitutes the application of eco-design standards to machine tools, mainly for automatically operated and/or numerically controlled (NC) machine tools. This document addresses the energy efficiency of machine tools during the use stage, i.e. the working life of the machine tool. Environmentally relevant stages other than the use stage and relevant impacts other than energy supplied to machine tools are not within the scope and need special treatment (e.g. according to ISO/TR 14062). Elements of eco-design procedure according to ISO/TR 14062 are applied to machine tools. Reporting of results to users and suppliers and monitoring of results are defined. Evaluation of energy efficiency implies quantification of the resources used, i.e. energy supplied, and of the result achieved. This document provides guidance for a reproducible quantification of the energy supplied. It does not suggest a methodology for quantifying the result achieved due to the lack of universal criteria. The result achieved in industrial application being machined workpieces, their properties (e.g. material, shape, accuracy, surface quality), the constraints of production (e.g. minimum lot size, flexibility) and other appropriate parameters for the quantification of the result achieved are intended to be determined specifically for each application or for a set of applications. This document defines methods for setting up a process for integrating energy efficiency aspects into machine tool design. It is not intended for the comparison of machine tools; also, this document does not deal with the effect of different types of user behaviour or different manufacturing strategies during the use phase. Lists of environmentally relevant improvements and machine tool components, control of machine tool components and combinations of machine tool components are given in Annex A. Annex B provides an example of application of the methodology. NOTE Certain machining processes and specific machine tools can allow significant changes in the environmental impact of machined workpieces, e.g. material reduction for aluminium cans by application of special press technology, higher performance of compressors by machining on precision form grinders[10] [13]. The environmental impact of such processes or machine tools might be less important compared to the environmental impact of the machined workpieces and their application. These changes in the environmental impact of machined workpieces are not subject of this document, but might be important if different machining processes or different machine tools are compared related to environmental impact of products. For instance, the accuracy of a machined workpiece might be a significant parameter for the environmental impact of the workpiece in its use stage, and any attempt to compare machine tools is intended to take this into account necessarily.

Machine tools - Environmental evaluation of machine tools - Part 1: Design methodology for energy-efficient machine tools

SN/T 3701.19-2017 进口旧机电产品检验技术要求 第19部分：加工金属的冲压机床

Technical Requirements for Inspection of Imported Used Mechanical and Electrical Products Part 19: Stamping Machine Tools for Processing Metals

ISO/TS 13399-80:2017 切削工具数据的表示和交换.第80部分:三维模型的创造和交流.综述和原则

Cutting tool data representation and exchange - Part 80: Creation and exchange of 3D models - Overview and principles

EN ISO 16093:2017 机床-安全-冷金属锯床(ISO 16093:2017)

Machine tools - Safety - Sawing machines for cold metal

ISO 16093:2017 机床. 安全. 冷金属锯床

Machine tools - Safety - Sawing machines for cold metal

JB/T 13071.5-2017 数控机床电气设备及系统 力矩电动机性能试验规范 第5部分：峰值堵转转矩

CNC machine tool electrical equipment and system torque motor performance test specifications Part 5: Peak locked-rotor torque

JB/T 13071.6-2017 数控机床电气设备及系统 力矩电动机性能试验规范 第6部分：低速平稳性

CNC machine tool electrical equipment and system torque motor performance test specifications Part 6: Low speed smoothness

JB/T 13070.1-2017 数控机床电气设备及系统 交流驱动单元性能试验规范 第1部分：总则

Performance test specifications for AC drive units of CNC machine tool electrical equipment and systems Part 1: General principles

JB/T 13073.6-2017 数控机床电气设备及系统 直线电机性能试验规范 第6部分：初、次级磁吸力

CNC machine tool electrical equipment and system linear motor performance test specifications Part 6: Primary and secondary magnetic attraction

JB/T 13070.3-2017 数控机床电气设备及系统 交流驱动单元性能试验规范 第3部分：机械谐振自动抑制

Performance test specifications for AC drive units of CNC machine tool electrical equipment and systems Part 3: Automatic suppression of mechanical resonance

JB/T 10793.3-2017 高精度加工中心 第3部分：技术条件

High Precision Machining Center Part 3: Technical Conditions

JB/T 13075-2017 工业机械电气设备及系统用的EtherMAC系统结构与通讯规范

EtherMAC system structure and communication specifications for industrial machinery and electrical equipment and systems

JB/T 13073.1-2017 数控机床电气设备及系统 直线电机性能试验规范 第1部分：总则

Specifications for linear motor performance testing of CNC machine tool electrical equipment and systems Part 1: General principles

JB/T 13073.4-2017 数控机床电气设备及系统 直线电机性能试验规范 第4部分：推力线性度及推力常数

CNC machine tool electrical equipment and systems linear motor performance test specifications Part 4: Thrust linearity and thrust constant

JB/T 13071.2-2017 数控机床电气设备及系统 力矩电动机性能试验规范 第2部分：连续堵转电流

CNC machine tool electrical equipment and system torque motor performance test specifications Part 2: Continuous stall current

JB/T 13073.3-2017 数控机床电气设备及系统 直线电机性能试验规范 第3部分：定位力

Linear motor performance test specifications for CNC machine tool electrical equipment and systems Part 3: Positioning force