共找到 1222 条与 机床辅具与附件 相关的标准,共 82 页
High-speed precision power chuck for machine tools
CNC tool holder performance test specifications
CNC turntable performance test specifications
Machine tool high speed rotary cylinder
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
This document specifies the dimensions of reduction sleeves with external 7/24 taper (Nos. 30, 40, 45, 50 and 60) for tools with Morse taper shanks (Nos. 1 to 6). All these sleeves allow driving of tools having Morse taper shanks which have a tenon at the small end of the shank; some sleeves allow driving of tools having Morse taper shanks which have an axially tapped hole in the shank: — with the use of an incorporated screw for sleeves 30 × 1 – 40 × 1 – 40 × 2 – 45 × 1 – 45 × 2 – 45 × 3 – 50 × 2 – 50 × 3 – 50 × 4 – 60 × 3 – 60 × 4 – 60 × 5; — with the use of a draw bar for sleeves 30 × 1 – 30 × 2 – 40 × 1 – 40 × 2 – 40 × 3 – 45 × 1 – 45 × 2 – 45 × 3 – 45 × 4 – 50 × 2 – 50 × 3 – 50 × 4 – 50 × 5 – 60 × 3 – 60 × 4 – 60 × 5 – 60 × 6. Morse tapers conform to ISO 296 while 7/24 tapers are in accordance with ISO 297.
Reduction sleeves with external 7/24 taper for tools with Morse taper shanks
Collets for tool holders with taper ratio 1:10 - Collets, holders, nuts
Tool holders with cylindrical shank. Type E with cylindrical seat
Tool shanks with 7/24 taper for automatic tool changers. Retention knobs of forms AD, AF, UD, UF, JD and JF
Tool shanks with 7/24 taper for automatic tool changers - Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF
本标准规定了精镗头(以下简称镗头)的结构型式、型号编制方法、技术要求、检验规则、标志与包装。本标准适用于加工直径范围40 mm~ 500 mm的深孔钻镗床用精镗头。
Finish boring head
本标准规定了滚压头的结构型式、型号编制方法、技术要求、检验规则、标志与包装。 本标准适用于加工直径范围40 mm~500 mm的深孔钻镗床用滚压头。
Rolling head
本标准规定了组合镗滚头的结构型式、型号编制方法、技术要求、检验规则、标志与包装。 本标准适用于加工直径范围63 mm~500 mm的深孔钻镗床用组合镗滚头。
Combined boring and rolling head
本标准规定了粗(半精)镗头的结构型式、型号编制方法、技术要求、检验规则、标志与包装。 本标准适用于加工直径范围40 mm~500 mm的深孔钻镗床用粗(半精)镗头(以下简称镗头)。
Rough (semi-finish) boring head
Powered industrial trucks and tractors — Brake performance — Determination of measurement procedures
La présente partie de l'ISO 12164 spécifie les dimensions des queues à cône creux (HSK) à utiliser sur des machines-outils (par exemple machines de tournage, machines de tournage-fraisage). Une gamme de dimensions de queues est spécifiée.
Hollow taper interface with flange contact surface - Part 3 : dimensions of shanks for stationary tools
Tool holders with rectangular shank for indexable inserts - Part 10: Style N (ISO 5610-10:2014)
Tool holders with rectangular shank for indexable inserts - Part 11: Style R (ISO 5610-11:2014)
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号