J64 焊接与切割设备 标准查询与下载

ISO 12176-4:2003 塑料管材和管件.聚乙烯系统的熔接设备.第4部分:可追踪性编码

This part of ISO 12176 specifies an encoding system for data on components, assembly methods and jointing operations for polyethylene (PE) piping systems for gas supply, for use in a traceability system. Reading of the codes can be carried out using alphanumeric or numeric data-recognition systems such as bar-code, magnetic-stripe card or microchip card readers. Other data-recognition systems conforming to ISO/TR 13950 may be used in association with one of the specified recognition systems to obtain the required traceability. This part of ISO 12176 is applicable to PE pipes, fittings and valves conforming to ISO standards for gas supply piping systems and also to the assembly operation utilizing methods such as fusion using a heating tool (butt, socket and saddle fusion), electrofusion (socket and saddle fusion), induction fusion and mechanical jointing.

Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 4: Traceability coding

DIN EN 61192-2:2003 钎焊电子组件的工艺要求.第2部分:表面安装组件

This part of IEC 61192 specifies requirements for workmanship in soldered surface-mounted electronic assemblies and multichip modules on organic substrates, on printed boards, and on similar laminates attached to the surface(s) of inorganic substrates.

Workmanship requirements for soldered electronic assemblies - Part 2: Surface-mount assemblies (IEC 61192-2:2003); German version EN 61192-2:2003

DIN EN 61192-4:2003 钎焊电子组件的工艺要求.第4部分:终端组件

This part of IEC 61192 specifies general requirements for workmanship in terminal soldered assemblies on organic substrates, on printed boards, and on similar laminates atteched to the surface(s) of inorganic substrates.

Workmanship requirements for soldered electronic assemblies - Part 4: Terminal assemblies (IEC 61192-4:2002); German version EN 61192-4:2003

DIN EN ISO 5826:2003 电阻焊设备.变压器.适用于所有变压器的通用规范

Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:1999); German version EN ISO 5826:2003

KS C IEC 60974-12:2003 弧焊设备.第12部分:焊接电缆的连接器

이 규격은 기구 사용 없이 연결과 분리의 모든 작용을 손으로 수행하기 위해 설계된 용접

Arc-welding equipment-Part 12:Coupling devices for welding cables

KS C IEC 60974-11:2003 弧焊设备.第11部分:焊条钳

범위 이 규격은 10 mm 지름까지의 전극과 수동 금속 아크 용접을 위한 전극 홀더에

Arc-welding equipment-Part 11:Electrode holders

NF A82-048:2003 电阻焊设备.变压器.适用于各种变压器的一般规范

Resistance welding equipment - Transformers - General specifications applicable to all transformers.

SANS 1671-6:2003 热塑性塑料的焊接．机械和设备．第6部分：超声焊接，刮软和嵌入物

Specifies requirements for machines and equipment used for ultrasonic welding of thermoplastics, also applicable to machines which may be used for ultrasonic staking or insertion operations.

Welding of thermoplastics - Machines and equipment Part 6: Ultrasonic welding, staking and insertion

JIS B 6801:2003 焊接、切割和加热用手动喷焊器

この規格は，使用最大流量が表1〔表lに記載されていない燃料ガスにあっては，発熱量が134 400 kJ/h (32 000 kcal/h)以下の燃料ガス)に示すアセチレンガス若しくは液化石油ガス(以下， LPGという。)又はこれらと同等の加熱効果をもつガスを燃料ガスとし，酸素と混合して金属の溶接，切断及び加熱に用いる手動のガス溶接器，ガス切断器及びガス加熱器(以下，溶接器，切断器，加熱器という。)について規定する。

Manual blowpipes for welding, cutting and heating

JIS B 6805:2003 焊接、切割及相关工艺用设备的橡胶软管连接

この規格は，溶接・切断及びこれらに関連する作業に用いられる溶断器用ゴムホース継手(以下，ゴムホース継手という。)に適用する。

Rubber hose connection for equipment for welding, cutting and allied processes

JIS B 6803:2003 焊接、切割及相关工艺用压力调节器

この規格は，溶接・切断及びそれらの類似作業に用いる圧縮ガス，溶解アセチレンガス，液化石油ガス(以下，LPGという。)及び炭酸ガスに用いる一段式圧力調整器及び二段式圧力調整器について規定する。ただし，サイフオン式炭酸ガス圧力容器に取り付ける圧力調整器には適用しない。

Pressure regulator for welding, cutting and allied processes

BS EN 13985:2003+A1:2009 机床.安全性.铡刀式剪切机

1.1 This European Standard specifies technical safety requirements and measures to be adopted by persons undertaking the design as defined in 3.11 of EN 292-1:1991, manufacture and supply of guillotine shears which are intended to work cold metal or material partly of cold metal as defined in 3.1.7 and hereafter referred as machines. 1.2 This standard also covers guillotine shears whose primary intended use is to work cold metal, which are to be used in the same way to work other sheet materials (e.g. cardboard, plastic, rubber, leather). 1.3 The requirements in this standard take account of intended use, as defined in 3.12 of EN 292-1:1991. This standard presumes access to the guillotine shear from all directions, deals with the hazards described in clause 4, and specifies the safety requirements and/or protective measures for both the operator and other exposed persons. 1.4 This standard also applies to ancillary devices which are an integral part of the guillotine shear. This standard also applies to machines which are integrated into an automatic production line where the hazards and risk arising are comparable to those of machines working separately. 1.5 This standard includes guillotine shears in which energy is imparted to the blade by a number of means. e.g.: a) mechanically driven from a motor through a friction clutch; b) through a direct drive motor and brake; c) through hydraulic pressure; d) through pneumatic pressure. 1.6 This standard does not cover machines whose principal designed purpose is: a) cutting in other than a straight line (e.g. at nibbling machines); b) cutting by continuous action at crocodile shears (see 3.4). 1.7 This standard does not cover the safety requirements related to the use of PES or PPS. They will be dealt with at its next revision. 1.8 This standard is not applicable to machines which are manufactured before the date of publication of this document by CEN.

Machine tools - Safety - Guillotine shears

BS EN 60974-10:2003 弧焊设备.电磁兼容性(EMC)要求

Arc welding equipment - Electromagnetic compatibility (EMC) requirements

KS B ISO 1089:2003 合成生胶.用高效液相色谱法测定抗降解剂

이 규격은 점용접 전극캡, 전극 어댑터, 전극 홀더 등의 맞춤을 위한 전극의 테이퍼 치

Electrode taper fits for spot welding equipment－Dimensions

IEC 60974-3:2003 电弧焊设备.第3部分:电弧放电和稳定设备

Specifies safety requirements for arc striking and arc stabilizing devices used in arc welding and allied processes (typically plasma arc cutting and arc spraying).

Arc welding equipment - Part 3: Arc striking and stabilizing devices

BS EN 562:2003 气焊设备.焊接、切割和相关工艺用压力计

This European Standard specifies requirements for Bourdon-tube pressure gauges normally used with compressed gases at pressures up to 300 bar in welding, cutting and allied processes. It also covers use for dissolved acetylene and for liquefied gases under pressure. It does not cover gauges for acetylene in acetylene manufacturing plants.

Gas welding equipment - Pressure gauges used in welding, cutting and allied processes

BS EN ISO 5826:2003 电阻焊设备.变压器.适用于各种变压器的一般规范

This International Standard give specifications applicable to transformers for resistance welding equipment without connected rectifier.

Resistance welding equipment - Transformers - General specifications applicable to all transformers

BS EN 13918:2003 气焊设备.焊接、切割和相关工艺用储气瓶上的组合流量计调节器.分类、规范和试验

This European Standard specifies the requirements and type test methods of integrated flowmeter regulators for welding, cutting and allied processes. It is applicable to integrated flowmeter regulators which may be equipped with flow control and measuring devices of gas flows on gas cylinders normally used for compressed gases up to 300 bar (30 MPa) and carbon dioxide (CO2). note:1) 300 bar relates to max. gas cylinder charging pressure at 15 ℃.

Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests

DIN EN ISO 15616-3:2003 高质量焊接和切割用CO2激光机验收试验.第3部分:气体流量和压力测量仪校正

This part of the standard is applicable to the measurement of the process oriented gas parameters for the acceptance tests for CO-laser beam machines for welding and cutting in two operation directions (2D) according to EN ISO 15616-1. This standard includes instructions to achieve the characteristics which are needed to classify the beam properties.

Acceptance tests for CO₂-laser beam machines for high quality welding and cutting - Part 3: Calibration of instruments for measurement of gas flow and pressure (ISO 15616-3:2003); German version EN ISO 15616-3:2003

DIN EN ISO 7287:2003 热切割设备图形符号

The document covers graphical symbols which are to be placed on thermal cutting equipment, e. g. indicators and operator controls, in order to instruct the persons handling the equipment as to its use and operation.

Graphical symbols for thermal cutting equipment (ISO 7287:2002); German version EN ISO 7287:2002