K52 发电机组 标准查询与下载

SANS 8528-3:2008 往复式内燃机驱动的交流发电机组.第3部分:发电机组的交流发电机

Specifies the principal characteristics of a.c. generators under the control of their voltage regulators when used in generating applications. Applies to a.c. generators used in a.c. generating sets driven by reciprocating internal combustion engines for

Reciprocating internal combustion engine driven alternating current generating sets Part 3: Alternating current generators for generating sets

SANS 8528-4:2008 往复式内燃机驱动的交流发电机组.第4部分:控制设备及开关设备

Specifies the criteria for controlgear and switchgear for generating sets with reciprocating internal combustion (RIC) engines. Applies to a.c. generating sets driven by RIC engines for land and marine use, excluding generating sets used on aircraft or t

Reciprocating internal combustion engine driven alternating current generating sets Part 4: Controlgear and switchgear

SANS 8528-5:2008 往复式内燃机驱动的交流发电机组.第5部分:发电机组

Defines terms and specifies design and performance criteria arising out of the combination of a reciprocating internal combustion (RIC) engine and an alternating current (a.c.) generator when operating as a unit. Applies to a.c. generating sets driven b

Reciprocating internal combustion engine driven alternating current generating sets Part 5: Generating sets

SL 397-2007 整装微型水轮发电机组

本标准适用于单机额定功率为100kW以下的整装微型水轮发电机组，是产品设计、制造、验收的基本依据，也可作为订货合同或技术协议的条款要求。

Integral micro hydroturbine generating unit

DL/T 1067-2007 蒸发冷却水轮发电机(发电/电动机)基本技术条件

本标准规定了蒸发冷却水轮发电机(发电／电动机)的技术要求、试验验收及试运行等基本内容。 本标准适用于水轮机(水泵／水轮机)直接连接的定子绕组采用蒸发冷却技术的三相50Hz凸极立式同步发电机(发电／电动机)。

Fundamental technical specifications for evaporative cooling hydrogenerator(generator/motor)

DL/T 1003-2006 水轮发电机组推力轴承润滑参数测量方法

本标准规定了水轮发电机组推力轴承润滑参数的测量方法。 本标准适用于各类型立式水轮发电机（发电/电动机）推力轴承润滑参数的测量 , 测量结果作为推力轴承出厂、现场型式试验、现场验收和同类产品性能比较的依据。

The measurement of lubricating parameters for thrust bearing of hydro-generator unit

IEEE 762-2006 使用在报告发电机组可靠性、有效性和生产力的定义

Standardizes terminology and indexes for reporting electric generating unit reliability, availability, and productivity performance measures.

Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity

SANS 8528-10:2006 往复式内燃机驱动交流发电机组．第10部分：包络面法测定空气传播噪声

Specifies measurement methods for the determination of airborne noise emitted by reciprocating internal combustion engine driven generating sets in such a way that the total of relevant noise emissions, for example, exhaust and cooling system noise, toge

Reciprocating internal combustion engine driven alternating current generating sets Part 10: Measurement of airborne noise by the enveloping surface method

SANS 8528-8:2006 往复式内燃机驱动交流发电机组．第8部分：对低功率发电机组的要求和试验

Specifies requirements, minimum performances and type tests for low-power generating sets driven by reciprocating internal combustion engines for land and marine use (domestic, recreational and industrial application), excluding generating sets used on a

Reciprocating internal combustion engine driven alternating current generating sets Part 8: Requirements and tests for low-power generating sets

SANS 8528-9:2006 往复式内燃机驱动的交流发电装置.第9部分:机械振动的测量和评价

Describes a procedure for measuring and evaluating the external mechanical vibration behaviour of generating sets at the measuring points stated in this part of SANS 8528.

Reciprocating internal combustion engine driven alternating current generating sets Part 9: Measurement and evaluation of mechanical vibrations

SANS 8528-12:2006 往复式内燃机驱动交流发电机组．第12部分：安全服务用备用电源

Applies to generating sets driven by reciprocating internal-combustion (RIC) engines for emergency power supply to safety services. Applies, for example, to safety equipment in hospitals, high-rise buildings, public gathering places, etc. Establishes the

Reciprocating internal combustion engine driven alternating current generating sets Part 12: Emergency power supply to safety services

JIS B 8124:2006 燃气发动机驱动的废能发电包

この規格は，民生用建物に導入される発電出力200 kW以上のガスエンジンを原動機とする，温水回収のコージェネレーションパッケージ(以下パッケージという。)の製造に必要な技術的指針について規定する。パッケージを常用防災兼用機として利用する場合にも，この規格を適用する。また，200 kW未満の場合には，発電出力が高圧仕様なら，この規格を適用することが望ましい。

Gas engine driven cogeneration package

GJB 5650-2006 野战通信柴油发电机组通用规范

本规范规定了野战通信柴油发电机组（以下简称机组）的通用技术要求、质量保证规定、交货准备和说明事项等。 本规范适用于15kW以下的野战通信车载交流工频（50Hz）发电机组。

General specification for diesel gen-sets of field communication

KS C 4216-2006 步进电机

스텝핑 모터는 직류 전원에 의해 전자 회로로 제어ㆍ운전된다. 이 점에 있어서 전원에 직접

Stepping motors

KS C IEC 61116:2006 小水电站机电设备安装指南

이 규격은 출력 5 MW 미만의 발전기와 공칭 러너(runner) 지름 3 m 미만의 터빈

Electromechanical equipment guide for small hydroelectric installations

BS ISO 8528-3:2006 往复式内燃机驱动的交流发电装置.发电机组的交流发电机

This part of ISO 8528 specifies the principal characteristics of Alternating Current (a.c.) generators under the control of their voltage regulators when used in generating set applications. It supplements the requirements of IEC 60034-1. NOTE At present no International Standard is available for asynchronous generators. When such an International Standard is published, this part of ISO 8528 will be revised accordingly. This part of ISO 8528 applies to a.c. generators used in a.c. generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings), supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as the basis for establishing any supplementary requirements. For a.c. generating sets driven by other reciprocating-type prime movers (e.g. steam engines) the provisions of this part of ISO 8528 should be used as a basis for establishing these requirements.

Reciprocating internal combustion engine driven alternating current generating sets - Alternating current generators for generating sets

BS ISO 8528-2:2006 往复式内燃机驱动的交流发电装置.发动机

This part of ISO 8528 specifies the principal characteristics of a Reciprocating Internal Combustion (RIC) engine when used for alternating current (a.c.) generating set applications. It applies to RIC engines for a.c. generating sets for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high rise buildings), supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as the basis for establishing any supplementary requirements. The terms which define the speed governing and speed characteristics of RIC engines are listed and explained where they apply specifically to the use of the engine for driving a.c. generators. For other reciprocating-type prime movers (e.g. steam engines), the provisions of this part of ISO 8528 should be used as a basis for establishing these requirements.

Reciprocating internal combustion engine driven alternating current generating sets - Engines

BS ISO 8528-6:2006 往复式内燃机驱动的交流发电装置.试验方法

This part of ISO 8528 specifies the test methods to be used for characterizing an entire generating set. It applies to alternating current (a.c.) generating sets driven by reciprocating internal combustion (RIC) engines for land and marine use, excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies, high-rise buildings) supplementary requirements may be necessary. The provisions of this part of ISO 8528 are intended as a basis for establishing any supplementary requirements. For a.c. generating sets driven by other reciprocating type prime movers (e.g. steam engines), this part of ISO 8528 is intended as a basis for establishing these requirements. NOTE Existing test methods for the engine (ISO 3046-1 and ISO 3046-3) and generator (IEC 60034-2) are applicable for those components. The generating set manufacturer is responsible for specifying these characteristics and the tests to be performed to verify them.

Reciprocating internal combustion engine driven alternating current generating sets - Test methods

BS ISO 8528-4:2006 往复式内燃机驱动的交流发电装置.控制设备和开关设备

This part of ISO 8528 specifies the criteria for controlgear and switchgear for generating sets with reciprocating internal combustion engines. It applies to Alternating Current (a.c.) generating sets driven by Reciprocating Internal Combustion (RIC) engines for land and marine use excluding generating sets used on aircraft or to propel land vehicles and locomotives. For some specific applications (e.g. essential hospital supplies and high-rise buildings), supplementary requirements may be necessary. The provisions of this part of ISO 8528 should be regarded as a basis for establishing any supplementary requirements. For generating sets driven by other prime movers (e.g. steam engines), this part of ISO 8528 should be regarded as a basis for establishing these requirements.

Reciprocating internal combustion engine driven alternating current generating sets - Controlgear and switchgear

ANSI/ASME PTC47-2006 整体煤气化联合循环电场

This Code provides procedures for performance testing of integrated gasification combined cycle (IGCC) power plants to determine fuel gas flow and quality, thermal efficiency (heat rate), and power output at specified operating conditions. It also provides procedures to determine the flow and quality of cleaned fuel gas produced by the IGCC plant. If electric power is the only product of the IGCC plant, this code provides procedures for determining Corrected net power, Corrected heat rate, and Corrected heat input.

Integrated Gasification Combined Cycle Plants