K71 电光源产品 标准查询与下载

BS EN 13032-2:2017 光和照明 灯具和灯具光度数据的测量和呈现 室内和室外工作场所的数据呈现

Light and lighting. Measurement and presentation of photometric data of lamps and luminaires. Presentation of data for indoor and outdoor work places

JIS C 8158:2017 电压> 50 V的普通照明业务用自镇流LED灯具

Self-ballasted LED-lamps for general lighting services by voltage > 50 V

QB/T 2516-2017 镝灯

本标准规定了镝灯的分类和命名、主要尺寸、基本参数、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于功率为3 500 W及以下、带透明玻壳的镝灯(以下简称为“灯”)。 灯根据不同规格由220 V或380 V、频率为50 Hz的交流电网供电，使用符合附录A要求的基准镇流器和触发器在额定电源电压的92%~106%范围内时，能正常启动和燃点。

Dysprosium lamp

QB/T 5209-2017 装饰照明用集成式LED灯 性能要求

本标准规定了装饰照明用集成式LED灯的产品分类与命名、要求、试验方法、检验规则、标志和包装要求。 本标准适用于家庭和类似场所作为装饰照明用、把LED光源和稳定燃点部件集成为一体的非定向集成式LED灯。 适用范围如下： ——额定电压AC220 V、频率50 Hz； ——采用符合GB/T 1406.1的螺口式灯头或符合GB/T 1406.5的卡口式灯头； ——外形尺寸符合GB/T 7249的要求、灯的外形最大直径不大于50 mm。 凡是符合本标准要求的灯，在额定电源电压的92%~106%或标称工作电压范围内，以及环境温度为-20℃~45℃之间的条件下应能启动并正常工作。

Integrated LED-lamps for decorative lighting services.Performance specifications

IEC 62554:2017 测量荧光灯内汞含量的样品的制备

This International Standard specifies sample preparation methods for determining mercury levels in new tubular fluorescent lamps (including single capped, double capped, self-ballasted and CCFL for backlighting) containing 0,1 mg mercury or more. The intended resolution of the methods described in this standard is of the order of 5 %. Mercury level measurement of spent lamps is excluded, as during lamp operation, mercury gradually diffuses into the glass wall and reacts with the glass materials. The test method of this standard does not recover mercury that is diffused into or reacted with or otherwise incorporated irreversibly with the glass wall of discharge tubes. This standard does not contain information on measurement. Measurement is specified in IEC 62321.

Sample preparation for measurement of mercury level in fluorescent lamps

IEC TR 61547-1:2017 通用照明设备.EMC抗扰度要求.第1部分:目标光闪变、电压波动抗扰度试验方法

This part of IEC 61547 describes an objective light flickermeter, which can be applied for, amongst others, the following purposes: testing the intrinsic performance of all lighting equipment without voltage fluctuations; testing the immunity performance of lighting equipment against (unintentional) voltage fluctuation disturbance on the AC power port; testing the immunity performance of lighting equipment against intentional voltage fluctuation on the AC power port arising for example from ripple control systems. The object of this document is to establish a common and objective reference for evaluating the performance of lighting equipment in terms of illuminance flicker. Temporal changes in the colour of light (chromatic flicker) are not considered in this test. This method can be applied to lighting equipment which is within the scope of IEC technical committee 34, such as lamps and luminaires, intended for connection to a low voltage electricity supply. Independent auxiliaries such as drivers can also be tested by application of a representative light source to that auxiliary. The objective light flickermeter and voltage fluctuation immunity method described in this document are based on the IEC 61000-3-3 standard for voltage fluctuation limits and the flickermeter standard IEC 61000-4-15. The objective light flickermeter described in this document can be applied to objectively assess flicker of lighting equipment that is powered from any type of source, AC mains, DC mains, battery fed or fed through an external dimmer. The specific voltage fluctuation immunity test method described in this document applies to lighting equipment rated for 120 V AC and 230 V AC, 50 Hz and 60 Hz. NOTE The principle of the method can be applied for other nominal voltage and frequency ratings.

Equipment for general lighting purposes - EMC immunity requirements- Part 1: An objective light flickermeter and voltage fluctuation immunity test method

BS EN 62931:2017 GX16t-5端发光二极管(LED)管形灯. 安全规格

GX16t-5 capped tubular LED lamp - Safety specifications

IEC 63013:2017 LED包. 长期发光和辐射通量维护投影

This document is applicable to LED packages for general lighting services. It specifies procedures and conditions for measuring the luminous flux maintenance of LED packages. It also provides the procedures and conditions (criteria) of projecting the long-term luminous flux maintenance based on limited luminous flux maintenance test data collected. Within the context of this document, wherever luminous flux measurement data is specified, radiant flux measurement data can also be used. These projection methods employ data collected as per ANSI/IES LM-80-15 (LM-80). The long-term projection is based on the exponential-fit-function procedure of IES TM-21-11 (TM-21), and gives an alternative border function procedure in the case where the exponential-fit-function of IES TM-21-11 is not applicable.

LED packages - Long-term luminous and radiant flux maintenance projection

DIN EN 61167:2017 金属卤素灯.性能规范(IEC 61167-2015,修正本);德文版本EN 61167-2016

Metal halide lamps - Performance specification (IEC 61167:2015, modified); German version EN 61167:2016

IEC TS 62861:2017 发光二极管(LED)光源和发光二极管(LED)灯具的主要组件可靠性试验指南

This Technical Specification provides guidelines for establishing confidence in product reliability using principal component testing for LED light sources and LED luminaires for general lighting. It includes methods and criteria using initial qualification tests and accelerated stress tests of the principal components. The performance of any principal component will influence the performance of the final product. Techniques to validate full lifetime claims and lumen maintenance projection are outside the scope of this Technical Specification. The following principal components are included in the testing if they are used as an integral part for the LED light source or LED luminaire: LED package and interconnects; optical materials; electronic subassemblies; cooling systems, both active (e. g. fans) and passive (e. g. thermal interface material); construction materials. This Technical Specification is not recommended for use as a normative reference to the LED product performance standards.

Guidelines for principal component reliability testing for LED light sources and LED luminaires

JIS C 7618-1:2017 单灯头荧光灯.第1部分:安全规范

Single-capped fluorescent lamps -- Part 1: Safety specifications

JIS C 7617-1:2017 双灯头荧光灯.第1部分:安全规范

Double-capped fluorescent lamps -- Part 1: Safety specifications

IEC 62931:2017 GX16t-5端发光二极管(LED)管形灯. 安全规格

This document specifies the safety and interchangeability requirements together with the test methods and conditions required to show compliance of non-integrated tubular LED lamps, intended for general lighting purposes, having: a rated wattage up to 70 W; a rated voltage up to 190 V ripple free DC; GX16t-5 cap as listed in Table 1. The requirements of this document relate only to type testing. NOTE 1 Where in this document the term "lamp(s)" is used, it is understood to stand for "non-integrated GX16t-5 capped tubular LED-lamp(s)", except where it is obviously assigned to other types of lamps. NOTE 2 The lamp specified in this document is operated with a controlgear specified in Annex B. See Clause 18. NOTE 3 This document includes photobiological safety.

GX16t-5 capped tubular led lamp - Safety specifications

DIN EN 60357:2017 卤钨灯(非机动车辆用)-性能规范(IEC 60357-2002,修订版+A1-2006,修订版+A2-2008+A3-2011);德文版本EN 60357-2003+Cor.-2003+A1-2008+A2-2008+A3-2011+A11-2016

Tungsten halogen lamps (non-vehicle) - Performance specifications (IEC 60357:2002, modified + A1:2006, modified + A2:2008 + A3:2011); German version EN 60357:2003 + Cor.:2003 + A1:2008 + A2:2008 + A3:2011 + A11:2016

IEC 60969:2016/COR1:2017 一般照明用自镇流荧光灯. 性能要求; 勘误表1

Self-ballasted compact fluorescent lamps for general lighting services - Performance requirements; Corrigendum 1

DB35/T 1617-2016 室内照明用LED 吸顶灯具技术规范

本规范规定了室内照明用LED吸顶灯具（以下简称“吸顶灯具”）的术语和定义、分类、技术要求、试验方法、检验规则以及标志、包装、运输、贮存的要求。 本规范适用于以LED为光源、电源电压不超过交流250V的室内照明用LED吸顶灯具，不包括平板灯具。

Technical specifications for LED ceiling lamps for indoor lighting

DIN EN 62386-201:2016 数字可寻址照明接口.第201部分:控制装置的特殊要求.荧光灯(装置型号0)(IEC 62386-201-2015).德文版本EN 62386-201-2015

Digital addressable lighting interface - Part 201: Particular requirements for control gear - Fluorescent lamps (device type 0) (IEC 62386-201:2015); German version EN 62386-201:2015

DB44/T 1899-2016 LED舞台灯

250V以下直流或1000V以下交流电源供电，以LED为光源的舞台灯，可用于室内外舞台灯光、电视、电影及摄影场所

LED Stage Light

DB44/T 1901-2016 LED球泡灯

以LED（发光二极管）为光源的球泡灯

LED Bulb

DB44/T 1896-2016 LED烛形泡

本标准适用于符合GB/T 1406.1、GB/T 1406.2、GB/T 1406.5灯头规定的LED烛形泡。该灯广泛适用于家居、商场、展览室、酒店、会堂及类似场所，用以照明和装饰。 适用于额定功率60W以下，电压220V频率50Hz、DC60V及以下。

LED candle bulb