M71 录制设备 标准查询与下载

IEC 60461:2010 时间码和控制码

This International Standard specifies a digital time and control code for use in television, film, and accompanying audio systems operating at nominal rate of 60, 59,94, 50, 30, 29,97, 25, 24 and 23,98 frames per second. This International Standard specifies a time address, binary groups, and flag bit structure. In addition, the standard specifies a binary group flag assignment, a linear time code transport, and a vertical interval time code transport. This International Standard defines primary data transport structures for linear time code (LTC) and vertical interval time code (VITC). This standard specifies the LTC modulation and timing for all video formats. This standard also defines the VITC modulation and location for 525/59,94 and 625/50 analogue composite and component systems only.

Time and control code

BS EN 61834-11:2008 录象.消费者用6.35mm磁带螺旋扫描数字视频盒式录象系统(525-60、625-50、1125-60和1250-50系统).1080i和720p系统用HDV格式

This part of IEC 61834 specifies the content, format, and recording method of data blocks containing video, audio, and system data on the helical scan digital video cassettes using 6,35 mm tape as defined in IEC 61834-1 for recording MPEG-2 streaming HD signals. The MPEG-2 streaming HD signals defined in this standard have the following modes. The HD1 mode is designed for the following systems: • 525-line progressive with a frame frequency of 59,94 Hz (hereinafter referred to as 480p/60 system) • 625-line progressive with a frame frequency of 50,00 Hz (hereinafter referred to as 576p/50 system) • 525-line interlace with a field frequency of 59,94 Hz (hereinafter referred to as 480i/60 system) • 625-line interlace with a field frequency of 50,00 Hz (hereinafter referred to as 576i/50 system) • 525-line progressive with a frame frequency of 29,97 Hz (hereinafter referred to as 480p/30 system) • 625-line progressive with a frame frequency of 25,00 Hz (hereinafter referred to as 576p/25 system) • 750-line progressive with a frame frequency of 29,97 Hz (hereinafter referred to as 720p/30 system) • 750-line progressive with a frame frequency of 25,00 Hz (hereinafter referred to as 720p/25 system) • 750-line progressive with a frame frequency of 59,94 Hz (hereinafter referred to as 720p/60 system) • 750-line progressive with a frame frequency of 50,00 Hz (hereinafter referred to as 720p/50 system) The main specifications shall be as defined in IEC 61834-9 and IEC 61834-10.. Other information, such as details about MPEG-2 stream descriptors, trick play data, system data, etc., are defined in Clause 7. The HD2 mode is designed for the following systems: • 1125-line interlace with a field frequency of 59,94 Hz (hereinafter referred to as 1080i/60 system) 1125-line interlace with a field frequency of 50,00 Hz (hereinafter referred to as 1080i/50 system) •The main specifications for helical recordings and the program track data format shall be as defined in Clauses 5 and 6 of this standard. Other information, such as details about main data, PES data, search data, subcode data, MPEG-2 stream descriptors, etc., are defined in Clause 8.

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) -Part 11: HDV format for 1080i and 720p systems

DIN EN 61834-11:2008 录像.消费者用6.35mm磁带的螺旋扫描数字录像带录像系统(525-60、625-50、1125-60和1250-50系统).第11部分:1080i和720p系统用HDV格式

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 11: HDV format for 1080i and 720p systems (IEC 61834-11:2008); German version EN 61834-11:20

IEC 61834-11:2008 录像.消费者用6.35mm磁带的螺旋扫描数字录像带录像系统(525-60、625-50、1125-60和1250-50系统).第11部分:1080i和720p系统用HDV格式

This part of IEC 61834 specifies the content, format, and recording method of data blocks containing video, audio, and system data on the helical scan digital video cassettes using 6,35 mm tape as defined in IEC 61834-1 for recording MPEG-2 streaming HD signals. The MPEG-2 streaming HD signals defined in this standard have the following modes. The HD1 mode is designed for the following systems: • 525-line progressive with a frame frequency of 59,94 Hz (hereinafter referred to as 480p/60 system) • 625-line progressive with a frame frequency of 50,00 Hz (hereinafter referred to as 576p/50 system) • 525-line interlace with a field frequency of 59,94 Hz (hereinafter referred to as 480i/60 system) • 625-line interlace with a field frequency of 50,00 Hz (hereinafter referred to as 576i/50 system) • 525-line progressive with a frame frequency of 29,97 Hz (hereinafter referred to as 480p/30 system) • 625-line progressive with a frame frequency of 25,00 Hz (hereinafter referred to as 576p/25 system) • 750-line progressive with a frame frequency of 29,97 Hz (hereinafter referred to as 720p/30 system) • 750-line progressive with a frame frequency of 25,00 Hz (hereinafter referred to as 720p/25 system) • 750-line progressive with a frame frequency of 59,94 Hz (hereinafter referred to as 720p/60 system) • 750-line progressive with a frame frequency of 50,00 Hz (hereinafter referred to as 720p/50 system) The main specifications shall be as defined in IEC 61834-9 and IEC 61834-10.. Other information, such as details about MPEG-2 stream descriptors, trick play data, system data, etc., are defined in Clause 7. The HD2 mode is designed for the following systems: • 1125-line interlace with a field frequency of 59,94 Hz (hereinafter referred to as 1080i/60 system) • 1125-line interlace with a field frequency of 50,00 Hz (hereinafter referred to as 1080i/50 system) The main specifications for helical recordings and the program track data format shall be as defined in Clauses 5 and 6 of this standard. Other information, such as details about main data, PES data, search data, subcode data, MPEG-2 stream descriptors, etc., are defined in Clause 8.

Recording - Helical-scan digital video cassette recording system using 6,35 mm magnetic tape for consumer use (525-60, 625-50, 1125-60 and 1250-50 systems) - Part 11: HDV format for 1080i and 720p systems

BS 8495:2007 图像输出作为证据使用的数字闭路电视(CCTV)录制系统用实施规则

This British Standard gives recommendations for the specification, selection, installation and operation of digital CCTV recording systems (DCRS), for the purpose of generating CCTV images to be used as evidence in a court of law. This document is aimed at assisting specifiers, installers, users, insurance companies, police authorities and purchasing organizations. Particular emphasis is placed on the following key areas. a) Fitness for purpose of recorded images. b) Audit trail. c) Image integrity. d) Time and date integrity. e) Storage. f) Export of images. g) Replay of exported images.

Code of practice for digital CCTV recording systems for the purpose of image export to be used as evidence

KS C IEC 60094-10:2007 磁带录音和放音系统.第10部分:时间码和地址码

제2절은 19 cm/s 또는 38 cm/s의 테이프 속도에 사용되는 폭 6.3 mm의 전문

Magnetic tape sound recording and reproducing systems－Part 10：Time and address codes

KS C IEC 61105:2007 磁带录像系统.参考磁带

이 규격은 다양한 비디오 테이프 레코더(VTR) 형식에 적용 가능한 기준 테이프들을 위한

Reference tapes for video tape recorder systems

GY/T 223-2007 标准清晰度数字电视节目录像磁带录制规范

本标准规定了标准清晰度数字电视节目录像磁带录制的基本要求。 本标准适用于符合GB/T 14857-1993 规定的串行数字分量视频信号和符合 GB/T14919-1994 规定的数 字音频信号，或经过码率压缩编解码处理后，达到标准清晰度数字电视要求的电视节目录像磁带的录制、播出和交换。采用其他数字编码方式和记录介质的电视节目的录制、播出和交换可参照本标准执行。

The recording of program tape for standard definition digital television

DLA MIL-S-80029 D NOTICE 3-2007 圆盘和引带磨沙机

MIL-S-80029D is inactive for new design and is no longer used, except for replacement purposes.

SANDER, DISK AND BELT

KS C IEC 60094-2:2006 磁带录音和重放系统.第2部分:校准带

이 규격은 업무용 가정용 자기 테이프 녹음 재생 기기의 재생 성능 조정 및 비교 평가를 하

Magnetic tape sound recording and reproducing systems－ Part 2：Calibration tapes

KS C IEC 60094-1:2006 磁带录音和重放系统.第1部分:通用条件和要求

이 규격은 미녹음 및 녹음한 자기 녹음 테이프와 그것에 부수하여 사용하는 릴과 릴, 카세트

Magnetic tape sound recording and reproducing systems－Part 1：General conditions and requirements

BS EN 62071-3:2006 使用6.35 mm磁带的螺旋扫描压缩数字录象带系统.D-7格式.数据流格式

This part of IEC 62071 defines the format of the data stream for the synchronous exchange of DV-based audio, data, and compressed video (whose data structure is defined in SMPTE 314M) over the interface defined in SMPTE 305M. It covers the transmission of audio, subcode data and compressed video packets associated with DV-based 25 and 50 Mb/s data structures including faster-than-real-time transmission for 525/60 SDTI and 625/50 SDTI systems. This standard does not include the data stream of a DV-compressed structure as defined in SMPTE 322M. Space within SMPTE 305M not used by a data stream conforming to this standard may be used for the transmission of data other than those representing DV-based audio, data and compressed video. In this standard, the 60 Hz system refers to the field frequency 59,94 Hz system and the 50 Hz system refers to the field frequency 50,0 Hz system.

Helical-scan compressed digital video cassette system using 6, 35 mm magnetic tape - Format D-7 - Data stream format

BS EN 62071-1:2006 使用6.35 mm磁带的螺旋扫描压缩数字录象带系统.D-7格式.VTR规范

This part of IEC 62071 specifies the content, format and recording method of the data blocks containing video, audio, and associated data which form the helical records on 6,35 mm tape contained in cassettes as specified in SMPTE 307M. In addition, this standard specifies the content, format, and recording method for longitudinal cue and control tracks. One video channel and two independent audio channels are recorded in the digital format for 25 Mb/s VTRs and one video channel and four independent audio channels for 50 Mb/s VTRs. Each of these channels is designed to be capable of independent editing. The video channel records and reproduces a component television signal in the 525-line system with a frame frequency of 29,97 Hz (hereinafter referred to as the 525/60 system) and the 625-line system with a frame frequency of 25,00 Hz (hereinafter referred to as the 625/50 system). Prior to recording, the digital signal is be compressed to a DV-based 25 Mb/s bit stream with 4:1:1 sampling or a DV-based 50 Mb/s bit stream with 4:2:2 sampling. The standard includes the process required to decode the DV-based 25 Mb/s bit stream and 50 Mb/s bit stream into output video, audio, and data.

Helical-scan compressed digital video cassette system using 6, 35 mm magnetic tape - Format D-7 - VTR specifications

BS EN 62071-2:2006 使用6.35 mm磁带的螺旋扫描压缩数字录象带系统.D-7格式.压缩格式

This part of IEC 62071 defines the DV-based data structure for the interface of digital audio, subcode data and compressed video with the following parameters: 525/60 system – 4:1:1 image sampling structure, 25 Mb/s data rate; 525/60 system – 4:2:2 image sampling structure, 50 Mb/s data rate; 625/50 system – 4:1:1 image sampling structure, 25 Mb/s data rate; 625/50 system – 4:2:2 image sampling structure, 50 Mb/s data rate. This standard does not define the DV compliant data structure for interface, of digital audio, subcode data and compressed video with the following parameters: 625/50 system – 4:2:0 image sampling structure, 25 Mb/s data rate The compression algorithm and the DIF structure conform to the DV data structure as defined in IEC 61834. Differences between the DV-based data structure defined in this standard and IEC 61834 are shown in Annex A.

Helical-scan compressed digital video cassette system using 6, 35 mm magnetic tape - Format D-7 - Compression format

NF C97-146*NF EN 62389:2006 DVD播放机的测量方法

Methods of measurement for DVD players.

BS EN 62141:2006 使用12.65 mm磁带和联合MPEG-4压缩的螺旋扫描数字视频盒式记录格式.D-16型格式

This International Standard specifies the track content, format, and recording method of the data blocks containing compressed video, AES3 audio data, and associated data which form the helical records on 12,65 mm tape in cassettes. This standard supports recording of source picture formats using 1920 × 1080 pixels with the 4:4:4 and 4:2:2 sampling structure specified in SMPTE 274M at the frame rate of 23,98 Hz, 24 Hz, 25 Hz and 29,97 Hz, and using 1280 × 720 pixels with the 4:2:2 sampling structure specified in SMPTE 296M at the frame rates of 50 Hz and 59,94 Hz (see note). This standard also supports recording of 12 channels of AES3 audio data and 3 lines of uncompressed blanking interval data. This standard includes packetizing and shuffling operations supporting picture compression using the DCT and DPCM encoding methods defined by ISO/IEC 14496-2 (MPEG-4 simple studio profile). NOTE Early implementations of this standard might not comply to the frame rate of 50 Hz as specified in SMPTE 296M.

Helical-scan digital video cassette recording format using 12, 65mm magnetic tape and incorporating MPEG-4 compression - Type D-16 format

ITU-R BS.775-2 SPANISH-2006 多声道立体声系统，带和不带图片

Multichannel stereophonic sound system with and without accompanying picture

ITU-R BS.775-2 FRENCH-2006 有无图像的多通道立体音响系统

Multichannel stereophonic sound system with and without accompanying picture

BS EN 61146-4:1998 摄像机(PAL/SECAN/NTSC).测量方法.第4部分:摄像机和摄像记录器的自动功能

This part of IEC 61146 applies to the assessment of characteristics of automatic functions which are implemented in colour video cameras and camera-recorders. The performance to be assessed in this standard is limited to automatic functions relating to light input from the lens and to the electronic output from video cameras and the video camera portions of camera-recorders. This standard defines test patterns, measurement conditions, methods of measurement and the presentation of measured results so as to make possible the comparison of the measurement results. This standard intends to provide an objective method of measurement for each characteristic of the automatic functions but the results of objective measurements may not correlate well with the subjective assessment of automatic functions. It does not specify limiting values for the various characteristics related to automatic functions.

Video cameras (PAL/SECAM/NTSC) - Methods of measurement - Part 4: Automatic functions of video cameras and camera-recorders

IEC 62071-1:2005 使用6.35mm磁带的螺旋扫描压缩数字视频盒式系统.格式D-7.第1部分:VTR规范

This part of IEC 62071 specifies the content, format and recording method of the data blocks containing video, audio, and associated data which form the helical records on 6,35 mm tape contained in cassettes as specified in SMPTE 307M. In addition, this standard specifies the content, format, and recording method for longitudinal cue and control tracks. One video channel and two independent audio channels are recorded in the digital format for 25 Mb/s VTRs and one video channel and four independent audio channels for 50 Mb/s VTRs. Each of these channels is designed to be capable of independent editing. The video channel records and reproduces a component television signal in the 525-line system with a frame frequency of 29,97 Hz (hereinafter referred to as the 525/60 system) and the 625-line system with a frame frequency of 25,00 Hz (hereinafter referred to as the 625/50 system). Prior to recording, the digital signal is be compressed to a DV-based 25 Mb/s bit stream with 4:1:1 sampling or a DV-based 50 Mb/s bit stream with 4:2:2 sampling. The standard includes the process required to decode the DV-based 25 Mb/s bit stream and 50 Mb/s bit stream into output video, audio, and data.

Helical-scan compressed digital video cassette system using 6,35 mm magnetic tape - Format D-7 - Part 1: VTR specifications