N23 数字显示仪表 标准查询与下载

GB/T 13970-1992 数字仪表基本参数系列

本标准规定了数字仪表性能特性的基本参数系列。本标准适用于测量下列基本电量的模数变换器或数字仪表： a.直流和交流电流； b.直流和交流电压； c.直流和交流功率； d.功率因数或相位； e.频率； f.电阻、阻抗或其分量。 本标准也适用于测量上述基本电量的多用仪表； 在多功能仪表中，本标准仅适用于执行测量上述基本电量功能的部分； 本标准也适用于以上述基本电量作为模拟量的非电量测量仪表。 本标准未规定数字仪表用附件（例如，分流器、高压探头、滤波器等）的性能特性的参数系列。 本标准不适用于基于将电能量转换为数字量方式工作的电能计量仪表； 本标准不适用于以数字量输出的电量变送器。

Basic parameter series of digital instruments

GB/T 13978-1992 数字多用表通用技术条件

本标准规定了具有直流电压（DCV）、交流电压（ACV）、直流电流（DCI）、交流电流（ACI）和电阻（Ω）五项测量功能及其任意组合的数字多用表常用专业术语、技术要求、试验方法和检验规则，以及仪器的标志、包装、运输、贮存等一些基本要求。 本标准适用于各种分类和型谱系列的电子数字式多用表。也适用于各种数据处理与信息控制设备和自动测试系统或个人仪器系统中，旨在对直流电压、交流电压、直流电流、交流电流和电阻等模拟量进行数字化测量的各种模数转换器。 本标准还适用于同类型以测量电压为基础兼有其它参量（电的或非电的）数字式测量仪器及其联用的附件，或者是它们的组合。数字面板表可参照使用。 本标准不适用于模拟式万用表和其他非数字指示仪器仪表。

Generic specification for digital multimeters

DB1304/T 390-2022 矿用温度传感器检测方法

Detection method of mining temperature sensor

T/CIMA 0028-2021 手持式数字多用表检验规范

本文件规定了手持式数字多用表（以下简称为仪表）的术语和定义、技术要求、检验项目、检验方法、检验结果的处理和检验周期。 本文件适用于手持式数字多用表的的首次检验和周期检验。

Inspection specification for hand-held digital multimeter

IEC 61083-1:2021 高压和高电流试验中测量用仪器及软件. 第1部分: 冲击试验仪器要求

This part of IEC 61083 is applicable to digital recorders, including digital oscilloscopes, used for measurements during tests with high impulse voltages and high impulse currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertai

Instruments and software used for measurements in high-voltage and high-current tests - Part 1: Requirements for instruments for impulse tests

IEC 61083-3:2020 高压和高电流冲击试验中测量用仪器和软件. 第3部分: 交流和直流电压和电流试验用硬件的要求

This part of IEC 61083 is applicable to digital recording instruments used for measurements during tests with high alternating and direct voltages and currents. It specifies the measuring characteristics and calibrations required to meet the measuring uncertainties and procedures

Instruments and software used for measurement in high-voltage and high-current tests - Part 3: Requirements for hardware for tests with alternating and direct voltages and currents

JJF 1604-2016 出租汽车计价器型式评价大纲

本型式评价大纲适用于出租汽车计价器（以下简称计价器）的型式评价。

Program of Pattern Evaluation for Taximeters

JB/T 11722-2013 电能表用分流器

本标准规定了 50Hz或60 Hz电网中使用的安装式电能表用分流器的技术要求、试验方法、检验规则及标志、包装、运输和贮存。本标准适用于电能表用分流器(以下称产品)。应用于其他技术领域中的分流器,也可参照使用。本标准不适用于电测量指示仪表使用的外附分流器。

Shunts for electric energy meters

NRS 096-2-2009 电量表．辅助规范．第2部分：电量表标准试块连接

Sets out technical requirements for test blocks and for the wiring of test blocks in metering control circuits.

Electricity metering - Ancillary specifications Part 2: Standard test block connections for electricity metering

YS/T 684-2008 热工数字显示仪现场校准规范

本规范适用于适用于使用中和修理后的输入信号为热电偶、热电阻、0 mA～20 mA DC、0 V～5 V DC,具有模拟-数字转换器的热工数字显示仪的校准。

Calibration specification for local mounting digital indicators

NRS 096-1-2007 电量表.辅助规范.第1部分:电量表的密封

Sets requirements for the sealing of electricity meters and related ancillary metering equipment. Provides guidelines on the roles and responsibilities related to the management of seals and information on the requirements for various types of seal.

Electricity metering - Ancillary specifications Part 1: The sealing of electricity meters

ANSI/IEEE 1122:2007 高电压脉冲测试中测量用数字记录器标准

This standard defines the terms specifically related to the digital recorders used for monitoring high-voltage and high-current impulse tests, specifies the necessary performance characteristics for such digital recorders to ensure their compliance with the requirements for highvoltage and high-current impulse tests, and describes the tests and procedures that are necessary to show that these performance characteristics are within the specified limits.

Standard for Digital Recorders for Measurements in High-Voltage Impulse Tests

DIN EN 62056-53:2007 电量测量.仪表读数、收费和负载控制的数据交换.第53部分:COSEM应用层(IEC 62056-53-2006)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 53: COSEM application layer (IEC 62056-53:2006); German version EN 62056-53:2007, text in English

DIN EN 62056-46:2007 电量测量.仪表读数、收费和负载控制的数据交换.第46部分:使用高级数据链路控制(HDLC)协议的数据链路层(IEC 62056-46-2002 + A1-2006)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC-protocol (IEC 62056-46:2002 + A1:2006); German version EN 62056-46:2002 + A1:2007, text in English

DIN EN 62056-62:2007 电量测量.仪表读数、收费和负载控制的数据交换.第62部分:接口分级(IEC 62056-62-2002)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 62: Interface classes (IEC 62056-62:2006); German version EN 62056-62:2007, text in English

DIN EN 62056-61:2007 电量测量.仪表读数、收费和负载控制的数据交换.第61部分:目标识别系统(OBIS)(IEC 62056-61-2002)

Electricity metering - Data exchange for meter reading, tariff and load control - Part 61: Object identification system (OBIS) (IEC 62056-61:2006); German version EN 62056-61:2007, text in English

DLA SMD-5962-06213 REV A-2007 3.3伏特单信道直流-直流变换器线性混合微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN).

MICROCIRCUIT, HYBRID, LINEAR, 3.3 VOLT, SINGLE CHANNEL, DC-DC CONVERTER

DLA SMD-5962-95559 REV F-2007 伏特单通道直流电和交流电转换器混合微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN).

MICROCIRCUIT, HYBRID, LINEAR, ? VOLT, DUAL CHANNEL, DC/DC CONVERTER

DLA SMD-5962-89447 REV F-2007 硅单片15伏驱动器-通常偏高接收器双渠道混合微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, DIGITAL, DUAL CHANNEL, 15 VOLT, DRIVER-RECEIVER, RECEIVER IDLE NORMALLY HIGH

DLA SMD-5962-01514 REV C-2007 MIL-STD-1553 BC/RTU/MT复用终端线性混合微电路

This drawing documents five product assurance classes as defined in paragraph 1.2.3 and MIL-PRF-38534. A choice of case outlines and lead finishes which are available and are reflected in the Part or Identifying Number (PIN). When available, a choice of radiation hardness assurance levels are reflected in the PIN.

MICROCIRCUIT, HYBRID, LINEAR, MIL-STD-1553, BC/RTU/MT, MULTIPLEXED TERMINAL