共找到 293 条与 望远镜、大地测量与航测仪器 相关的标准,共 20 页
This specification covers four types of panoramic telescopes which provide four-power magnification and a ten-degree field of view. They are equipped with numerical counters which indicate azimuth settings and corrections.
TELESCOPE, PANORAMIC: M137, M137A1, M137A2 AND M137A3
This part of ISO 14490 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments.
Optics and optical instruments - Test methods for telescopic systems - Test methods for limit of resolution
This part of ISO 14490 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments.
Optics and optical instruments - Test methods for telescopic systems - Test methods for veiling glare index
This part of ISO 14490 is applicable to binocular telescopic systems and specifies the test methods for determination of the following characteristics: — non-parallelism of the axes of bundles of rays emergent from the eyepieces; — interpupillary distance; — relative difference in magnification; — focusing difference between telescopes of binocular systems.
Optics and optical instruments - Test methods for telescopic systems - Part 2: Test methods for binocular systems
This part of ISO 14490 is applicable to amateur astronomical telescopes. For general optical test methods of telescopic systems see ISO 14490-1.
Optics and optical instruments - Test methods for telescopic systems - Part 4: Test methods for astronomical telescopes
This part of ISO 14490 specifies the test methods for the determination of the veiling glare index of telescopic systems and observational telescopic instruments.
Optics and optical instruments - Test methods for telescopic systems - Part 6: Test methods for veiling glare index
This part of ISO 14490 specifies the test methods for the determination of the following basic characteristics of telescopic systems and observational telescopic instruments: — angular magnification (see Clause 4); — entrance pupil diameter (see Clause 5); — exit pupil diameter and eye relief (see Clause 6); — angular field of view in the object space (see Clause 7); — angular field of view in the image space (see Clause 8); — angular field of view in the object space for spectacle wearers (see Clause 9); — collimation of the bundle of rays emergent from the eyepiece (see Clause 10); — image rotation (see Clause 11); — closest distance of observation (see Clause 12).
Optics and optical instruments - Test methods for telescopic systems - Part 1: Test methods for basic characteristics
This part of ISO 14490 specifies the test methods for the determination of the transmittance of telescopic systems and observational telescopic instruments.
Optics and optical instruments - Test methods for telescopic systems - Part 5: Test methods for transmittance
This part of ISO 14490 specifies the test methods for the determination of the limit of resolution of telescopic systems and observational telescopic instruments.
Optics and optical instruments - Test methods for telescopic systems - Part 7: Test methods for limit of resolution
Specification of requirements for high performance telescopic sights.
Optics and optical instruments - Specifications for telescopic sights - Part 2: High-performance instruments (ISO 14135-2:2003)
Optics and optical instruments - Specifications for telescopic sights - Part 1: General-purpose instruments (ISO 14135-1:2003)
This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of electronic tacheometers (total stations) and their ancillary equipment when used in building and surveying measurements. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. This part of ISO 17123 can be thought of as one of the first steps in the process of evaluating the uncertainty of measurements (more specifically of measurands). The uncertainty of a result of a measurement is dependent on a number of factors. These include among others: repeatability, reproducibility (between-day repeatability) and a thorough assessment of all possible error sources, as prescribed by the ISO Guide to the expression of uncertainty in measurement (GUM). These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposely designed to minimize atmospheric influences.
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 5: Electronic tacheometers
この規格は,ファインダ望遠鏡を含むアマチュア向けの天体望遠鏡(以下,天体望遠鏡という。)の特性及び機能について規定する。ただし,専門家用及び玩具の望遠鏡は除く。
Optics and optical instruments -- Telescopic systems -- Specifications for astronomical telescopes
この規格は,射撃を目的とすろ空気銃,拳銃及びライフル銃に取り付けて使用するライフルスコープ(以下,ライフルスコープという。)の特性について規定する。
Telescopic sights
This part of ISO 17123 specifies field procedures to be adopted when determining and evaluating the precision (repeatability) of optical plumbing instruments and their ancillary equipment, when used in building and surveying measurements. This part of ISO 17123 is not applicable to optical plummets as a device in tribrachs or in surveying instruments. Primarily, these tests are intended to be field verifications of the suitability of a particular instrument for the immediate task at hand and to satisfy the requirements of other standards. They are not proposed as tests for acceptance or performance evaluations that are more comprehensive in nature. This part of ISO 17123 can be thought of as one of the first steps in the process of evaluating the uncertainty of a measurement (more specifically a measurand). The uncertainty of a result of a measurement is dependent on a number of factors. These include among others: repeatability, reproducibility (between-day repeatability) and a thorough assessment of all possible error sources, as prescribed by the ISO Guide to the expression of uncertainty in measurement (GUM). These field procedures have been developed specifically for in situ applications without the need for special ancillary equipment and are purposefully designed to minimize atmospheric influences and effects of imperfect adjustment of the optical plumbing instrument.
Optics and optical instruments - Field procedures for testing geodetic and surveying instruments - Part 7: Optical plumbing instruments
This part of ISO 14490 specifies test equipment and test procedures for the determination of the following optical characteristics of telescopic sights: — axial parallax; — parallax; — eye relief range; — reticle tracking.
Optics and optical instruments - Test methods for telescopic systems - Test methods for telescopic sights
This part of ISO 14135 applies to high-performance telescopic sights, used on hand-held firearms and airguns. It contains a classification of the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. General-purpose telescopic sights are specified in part 1 of ISO 14135.
Optics and optical instruments - Specification for telescopic sights - High-performance instruments
This part of ISO 14135 applies to general-purpose telescopic sights, used on hand-held firearms and airguns. It contains a classification to the usage of telescopic sights and specifies interfaces, minimum requirements and tolerances to their performances. High-performance telescopic sights are specified in part 2 of ISO 14135.
Optics and optical instruments - Specification for telescopic sights - General-purpose instruments
Specification of test methods for the measurement of specific characteristics of telescopic sights.
Optics and optical instruments - Test methods for telescopic systems - Part 3: Test methods for telescopic sights (ISO 14490-3:2004)
This part of ISO 14490 specifies test equipment and test procedures for the determination of the following optical characteristics of telescopic sights: — axial parallax; — parallax; — eye relief range; — reticle tracking.
Optics and optical instruments - Test methods for telescopic systems - Part 3: Test methods for telescopic sights
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号