N32 放大镜与显微镜 标准查询与下载
共找到 345 条与 放大镜与显微镜 相关的标准，共 23 页
This International Standard specifies a series of values, tolerances, and symbols for the magnification of imaging components of light microscopes and defines a number of imaging components and magnifying systems to which they apply. The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 10934-1 apply. 4 Symbols for magnification of imaging components Table 1 gives the symbols that shall be used when referring to the magnification of imaging components and combinations thereof and gives examples of methods of expression. 5 Values and tolerances for magnification 5.1 Values for magnification Values for the magnification of imaging components or magnifying systems should be one of the values given in Table 2. The products or quotients of any two values in the table are also to be considered as values within the table. The table can be extended by a factor of 10 per row. 5.2 Tolerance of values of magnification for imaging components Tolerances of values of magnification shall be as given in Table 3. Licensee=University of Alberta/5966844001, User=ahmadi, rozita 1
Microscopes - Values, tolerances and symbols for magnification
- ICS
- 37.020
- CCS
- N32
- 发布
- 2014-12
- 实施
Stereomicroscopes. Information provided to the user
- ICS
- 37.020
- CCS
- N32
- 发布
- 2014-09-30
- 实施
- 2014-09-30
Microscopes. Imaging distances related to mechanical reference planes. Infinity-corrected optical systems
- ICS
- 37.020
- CCS
- N32
- 发布
- 2014-09-30
- 实施
- 2014-09-30
This International Standard specifies the minimum information to be provided by the manufacturer of stereomicroscopes to the user. In addition to the mandatory information (m), further data are recommended (r).
Stereomicroscopes - Information provided to the user
- ICS
- 37.020
- CCS
- N32
- 发布
- 2014-09
- 实施
Microscopes - Imaging distances related to mechanical reference planes - Part 2: Infinity-corrected optical systems
- ICS
- 37.020
- CCS
- N32
- 发布
- 2014-09
- 实施
This International Standard defines terms used in the practice of AEM. It covers both general and specific concepts classified according to their hierarchy in a systematic order. This International Standard is applicable to all standardization documents relevant to the practice of AEM. In addition, some parts of this International Standard are applicable to those documents relevant to the practice of related fields (e.g. TEM, STEM, SEM, EPMA, EDX) for the definition of those terms common to them.
Microbeam analysis.Analytical electron microscopy.Vocabulary
- ICS
- 01.040.37;37.020
- CCS
- N32
- 发布
- 2013-12
- 实施
Microscopes. Screw threads for objectives and related nosepieces
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-11-30
- 实施
- 2013-11-30
This International Standard specifies the dimensions of screw thread types for connecting a microscope objective to the nosepiece. The use of these screw thread types is recommended for microscopes unless other fittings are required for optical or design reasons.
Microscopes.Screw threads for objectives and related nosepieces
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-11
- 实施
Technical Requirements for Phase Shift Differential Confocal Microscopy
- ICS
- 17.180.30
- CCS
- N32
- 发布
- 2013-10-11
- 实施
- 2013-11-11
Basic Requirements for Reflective Fluorescence Confocal Microscopy
- ICS
- 17.180.30
- CCS
- N32
- 发布
- 2013-10-11
- 实施
- 2013-11-11
Basic Requirements for Continuous Spectrum Confocal Microscopy
- ICS
- 17.180.30
- CCS
- N32
- 发布
- 2013-10-11
- 实施
- 2013-11-11
Microscopes. Cover glasses. Quality of materials, standards of finish and mode of packaging
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-09-30
- 实施
- 2013-09-30
This part of ISO 8255 specifies requirements and methods of test for the quality of material,standards of finish,and mode of packaging for microscope cover glasses. This part of ISO 8255 is applicable to microscope cover glasses for use in transmitted light microscopy(400 nm to 760 nm).
Microscopes.Cover glasses.Part 2: Quality of materials, standards of finish and mode of packaging
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-09-15
- 实施
이 표준은 적절한 표준물질을 사용하여 주사전자현미경 영상의 배율을 교정하는 방법을 구체적으
Microbeam analysis－Scanning electron microscopy－Guidelines for calibrating image magnification
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-06-05
- 实施
- 2013-06-05
Microscopes. Designation of microscope objectives. Flatness of field/Plan
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-05-31
- 实施
- 2013-05-31
This part of ISO 19012 specifies the use of the marking “Plan” on microscope objectives, and defines the diameter of the sharp region of the primary image of a flat object surface. This part of ISO 19012 applies to visual observation using the combination of objective lens, tube lens and eyepiece, as specified by the manufacturer.
Microscopes.Designation of microscope objectives .Part 1: Flatness of field/Plan
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-05-15
- 实施
本规范适用于生物显微镜的校准。
Calibration Specification for Biological Microscopes
- ICS
- CCS
- N32
- 发布
- 2013-04-27
- 实施
- 2013-07-27
Microscopes. Designation of microscope objectives. Chromatic correction
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-02-28
- 实施
- 2013-02-28
This part of ISO 19012 specifies classes of chromatic correction and defines minimum requirements regarding chromatic correction. The defined marking on the component enables the operator to correctly use the microscope. The standard application for visual observation refers to the combination of objective and tube lens as specified by the manufacturer. The specifications regarding chromatic correction only refer to axial chromatic aberration.
Microscopes - Designation of microscope objectives - Part 2: Chromatic correction
- ICS
- 37.020
- CCS
- N32
- 发布
- 2013-02
- 实施
