N46 照相机与照相器具 标准查询与下载

JB/T 8260.1-1999 摄影用色滤光镜

本标准规定了色滤光镜的种类、光谱特性、检验规则、产品名称及标志。 本标准适用于350mm～800mm波长范围内，大量吸收透过临界波长以下的光，而使大于该波长的光尽可能多地透过的色滤光镜。

Photographic colour filters

JB/T 8250.6-1999 照相机 振动试验方法

本标准规定了小型照相机等单项产品的振动试验方法。 本标准适用于小型照相机的振动试验、也适用于快门等单项产品的振动试验。

Vibration test method for cameras

JB/T 8250.8-1999 照相机 冲击试验方法

本标准规定了小型照相机等单项产品的冲击试验方法。 本标准适用于小型照相机等单项产品的非多次重复性机械冲击试验。

Shock test method for cameras

ISO 1203:1998 摄影 胶卷照相机 后盖窗位置

This International Standard specifies the location of back windows of roll film cameras in relation to the number of exposures and film sizes they are designed to accommodate.

Photography - Roll film cameras - Back window location

ISO 1754:1998 摄影 使用35mm胶片和胶卷的照相机 画幅尺寸

This International Standard specifies the image dimensions (on the film) of still pictures made with cameras in which the image dimensions are defined by the camera frame. This International Standard does not apply to stereo photography cameras (see ISO 515). Panoramic image dimensions (13 × 36) of cameras featuring a mid-roll panoramic photo are not specified in this International Standard.

Photography - Cameras using 35 mm film and roll film - Picture sizes

ISO 12232:1998 摄影 电子照相机 ISO感光速度的测定

This International Standard specifies a method for assigning exposure index values, ISO speed ratings, and ISO speed latitude ratings to electronic still-picture cameras. The standard applies to both monochrome and colour electronic still-picture cameras.

Photography - Electronic still-picture cameras - Determination of ISO speed

SJ 20711-1998 分步投影曝光机通用规范

本标准规定了分步投影曝光机的分类、要求、质量保证规定和交货准备等。 本标准适用于超大规范集成电路(VLSI)和专用集成芯片(ASIC)以及其它器件的微细光刻设备。其它类型的曝光机也可参照使用。

General specification for step and repeat exposure systems

ANSI/ISO 8478:1996, ANSI/PIMA IT3.614:1997 摄影.摄影机镜头.测量ISO光谱透射率的方法

Photography – Camera Lenses – Method for Measuring ISO Spectral Transmittance

ISO 10594:1997 缩微摄影技术 轮转式摄影系统 检测性能用的测试标板

This International Standard specifies a test target and a method for checking the photographic quality and mechanical performances of rotary cameras used for producing 16 mm microfilm. This test target and method can be used for — evaluating the performance of cameras, e.g. before purchase to establish initial reference; — acceptance tests, e.g. confirming purchase specifications after maintenance; — routine checking, e.g. weekly or monthly.

Micrographics - Rotary camera systems - Test target for checking performance

ISO 12231:1997 摄影 电子照相机 术语

Photography - Electronic still-picture cameras - Terminology

ANSI/NAPM IT2.49-1997 摄影.口腔牙科用X射线照相胶片.规范

Specifies sensitometric characteristics of the film/process systems and establishes a speed classification system.

Photography - Intra-Oral Dental Radiographic Film - Specification

JB/T 8477.1-1996 影室照相用闪光同步小型电子闪光灯

本标准规定了影室照相用闪光触发同步小型电子闪光灯的技术要求、试验方法和检验规则。 本标准适于交流电源、螺口式灯头结构的闪光触发同步小型电子闪光灯。 其它影室照相用闪光同步电子灯也可参照采用。

Synchro small-type electronic flasher for photographic purposes in studio

NF C92-139:1996 摄影用电子闪光灯的安全性要求

Safety requirements for electronic flash apparatus for photographic purposes.

ASTM F1351-96(2008) 测定硬皱纹纸对商用影象系统影象产品的影响的标准实施规程

As a comparative test, this practice can be used to determine the damage caused by creasing paper, that is, damage to paper, coatings or images affixed to the paper and the loss of image quality and legibility that can result from creasing.1.1 This practice describes a procedure for hard creasing paper in a uniform and reproducible manner. 1.2 The crease is positioned across the image and the amount of image degradion is determined. 1.3 The effect of creasing on the paper surface can also be determined. 1.4 The values stated in inch-pound units are to be regarded as the standard. The SI units given in parentheses are for information only. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Determination of the Effect of Hard Creasing Paper on Images Produced by Business Imaging Systems

ASTM F1623-96(2008) 有关热成像制品的标准术语

Standard Terminology Relating to Thermal Imaging Products

JB/T 7799-1995 彩色扩印机镜头分辨率测试片

1.1本标准规定了用黑白胶片标板扩印方式测定彩色扩印机镜头综合分辨率的测试片的技术要求及检验方法、检验规则、标志、包装、运输、贮存等。 1.2本标准适用于以扩印方式测定彩色扩印机镜头综合分辨率的测度片。 1.3本标准规定的彩色扩印机镜头分辨率的测试片适用于检测底片画幅为24mm×36mm和56mm×56mm的彩色扩印机镜头。检测底片画幅为其他尺寸的彩色扩印机镜头的分辨率测试片可参照本标准规定的技术要求制作。

Colour enlarge-printing machine lens resolution test piece

JB/T 7791-1995 照相机日期后背技术条件

本标准规定了具有谐振频率32768Hz液晶显示器安装于小型民用照相机电子日斯后背的技术条件。 本标准不适用于安装在特种照相机上的日期后背和非电子日期后背。

Camera date back - Technical specifications

JB/T 7798-1995 彩色扩印多分镜

本标准规定了彩色扩印多分镜的技术要求和测试方法。 本标准适用于彩色扩印多分镜。放大机和黑白扩印用多分镜可参照使用。

Colour enlarge-printing multi-resolution lens

BS ISO 8581:1995 摄影技术.电子闪光设备.同步线连接器

Specifies type and dimensions of the electrical connectors (plug and socket) to be used for electronic photoflash equipment. Gives a limited number of types of connector and the dimensions to be used for the connection between flash unit and flash synchro-cords.

Photography - Electronic flash equipment - Connectors to synchro-cord

BS ISO 2827:1988 摄影技术.电子闪光装置.光输出量和性能的测定

This International Standard specifies methods of measurement and sets standards of performance for light output, angle of coverage, ready indication, recycle time and number of flashes for electronic flash equipment of the single flash type, which is primarily intended to provide illumination for photography with cameras in which the contacts that control the flash are closed when the shutter of the camera is fully or nearly fully open.

Photography - Electronic flash equipment - Determination of light output and performance