N71 金属材料试验机 标准查询与下载

JIS B 7725:2010 维氏硬度试验.试验机的验证

Vickers hardness test -- Verification and calibration of testing machines

JB/T 9377-2010 超声硬度计 技术条件

本标准规定了超声硬度计的技术要求、检验方法、检验规则、标志与包装、随行技术文件等内容。 本标准适用于按超声接触阻抗法测定金属材料布氏、洛氏和维氏硬度用的超声硬度计(以下简称硬度计)。

Specification for the ultrasonic hardness testers

SANS 7500-1:2009 金属材料．静态单轴向试验机的验证．第1部分:拉伸/压缩试验机．测力系统的检验与校准

Specifies the verification of tension/compression testing machines.

Metallic materials - Verification of static uniaxial testing machines Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system

SANS 7500-2:2009 金属材料．静态单轴向试验机的验证．第2部分:拉力蠕变试验机．施加力的检验

Specifies the verification of testing machines used for uniaxial creep testing in tension in accordance with ISO 204. It also applies to dead-weight machines, lever-type creep testing machines and direct-spring-loading machines.

Metallic materials - Verification of static uniaxial testing machines Part 2: Tension creep testing machines - Verification of the applied force

SANS 14577-1:2009 冶金材料．测量材料硬度和参数用的仪器压痕试验．第1部分：试验方法

Specifies the method of instrumented indentation test for determination of hardness and other materials parameters for macro, micro and nano ranges.

Metallic materials - Instrumented indentation test for hardness and materials parameters Part 1: Test method

SANS 14577-2:2009 冶金材料．测量材料硬度和参数用的仪器压痕试验．第2部分：试验机的认证和校准

Specifies the method of verification and calibration of testing machines for carrying out the instrumented indentation test in accordance with SANS 14577-1. It also describes a direct verification method for checking the main functions of the testing mac

Metallic materials - Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines

SANS 14577-3:2009 冶金材料．测量材料硬度和参数用的仪器压痕试验．第3部分:参考试块的校准

Specifies a method for the calibration of reference blocks to be used for the indirect verification of testing machines for the instrumented indentation test, as specified in SANS 14577-2.

Metallic materials - Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks

ASTM E2624-09 测试机械和装置扭矩校准用标准规程

Testing machines that apply and indicate torque are used in many industries, in many ways. They may be used in a research laboratory to measure material properties, and in a production line to qualify a product for shipment. No matter what the end use of the machine may be, it is necessary for users to know the amount of torque that is applied, and that the accuracy of the torque value is traceable to the National Standards. This standard provides a procedure to verify these machines and devices, in order that the indicated torque values may be traceable. A key element to having traceability is that the devices used in the calibration produce known torque characteristics, and have been calibrated in accordance with Practice E 2428. This standard may be used by those using, those manufacturing, and those providing calibration service for torque capable testing machines or devices and related instrumentation.1.1 This practice covers procedures and requirements for the calibration of torque for static and quasi-static torque capable testing machines or devices. These may, or may not, have torque indicating systems and include those devices used for the calibration of hand torque tools. Testing machines may be calibrated by one of the three following methods or combination thereof: 1.1.1 Use of standard weights and lever arms. 1.1.2 Use of elastic torque measuring devices. 1.1.3 Use of elastic force measuring devices and lever arms. 1.1.4 Any of the methods require a specific uncertainty of measurement and a traceability derived from national standards of mass and length. 1.2 The procedures of 1.1.1, 1.1.2, and 1.1.3 apply to the calibration of the torque-indicating systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the torque-indicating system(s) to be calibrated and included in the report. 1.3 Since conversion factors are not required in this practice, either english units, metric units, or SI units can be used as the standard. 1.4 Torque values indicated on displays/printouts of testing machine data systems—be they instantaneous, delayed, stored, or retransmitted—which are Calibrated with provisions of 1.1.1, 1.1.2 or 1.1.3 or a combination thereof, and are within the ±1 % of reading accuracy requirement, comply with this practice. 1.5 The following applies to all specified limits in this standard: For purposes of determining conformance with these specifications, an observed value or a calculated value shall be rounded “to the nearest unit” in the last right-hand digit used in expressing the specification limit, in accordance with the rounding method of Practice E 29, for Using Significant Digits in Test Data to Determine Conformance with Specifications. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Torque Calibration of Testing Machines and Devices

ISO 7500-1:2004/Cor 1:2008 金属材料.静态单轴向试验机的验证.第1部分: 拉伸/压缩试验机.应力测量系统的验证和校正;技术勘误表1

Technical Corrigendum 1 to ISO 7500-1:2004 was prepared by Technical Committee ISO/TC 164, Mechanical testing of metals, Subcommittee SC 1, Uniaxial testing.

Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system TECHNICAL CORRIGENDUM 1

ISO 7500-2:2006 金属材料.静态单轴向试验机的验证.第2部分:拉伸蠕变试验机.作用力的验证

This part of ISO 7500 specifies the verification of testing machines used for uniaxial creep testing in tension in accordance with ISO 204. The verification consists of - a general inspection of the testing machine, and - a verification of the force applied by the testing machine. This part of ISO 7500 applies to dead-weight machines, lever-type creep testing machines and direct-springloading machines. Machines with a force-measuring system1 ) should be verified in accordance with ISO 7500-1, Metallic materials — Verification of static uniaxial testing machines — Part 1: Tension/compression testing machines — Verification and calibration of the force-measuring system.

Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force

DIN 51309:2005 材料试验机.静扭矩测量装置的校准

Materials testing machines - Calibration of static torque measuring devices

BS CWA 15261-3:2005 测量金属材料机械试验的不确定性.蠕变试验的不确定性评价

Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in creep testing

BS CWA 15261-1:2005 测量金属材料机械试验的不确定性.低循环疲劳试验的不确定性评价

Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in low-cycle fatigue testing

BS CWA 15261-2:2005 测量金属材料机械试验的不确定性.抗拉试验的不确定性评价

Measurement uncertainties in mechanical tests on metallic materials - The evaluation of uncertainties in tensile testing

JJG 150-2005 金属布氏硬度计检定规程

Verification rules for metal Brinell hardness testers

JJG 147-2005 标准金属布氏检定规程

Standard Metal Brinell Test Procedures

ASTM E2309/E2309M-05(2011)e1 用于材料试验机械的位移测量系统和装置验证的标准操作规程

Testing machines that apply and measure displacement are used in many industries. They may be used in research laboratories to determine material properties, and in production lines to qualify products for shipment. The displacement measuring devices integral to the testing machines may be used for measurement of crosshead or actuator displacement over a defined range of operation. The accuracy of the displacement value shall be traceable to the National Institute of Standards and Technology (NIST) or another recognized National Laboratory. Practices E2309 provides a procedure to verify these machines and systems, in order that the measured displacement values may be traceable. A key element to having traceability is that the devices used in the verification produce known displacement characteristics, and have been calibrated in accordance with adequate calibration standards.1.1 These practices cover procedures and requirements for the calibration and verification of displacement measuring systems by means of standard calibration devices for static and quasi-static testing machines. This practice is not intended to be complete purchase specifications for testing machines or displacement measuring systems. Displacement measuring systems are not intended to be used for the determination of strain. See Practice E83. 1.2 These procedures apply to the verification of the displacement measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the displacement-measuring system(s) to be verified. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 Displacement values indicated on displays/printouts of testing machine data systemsbe they instantaneous, delayed, stored, or retransmittedwhich are within the Classification criteria listed in Table 1, comply with Practices E2309/E2309M. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

ASTM E2309-05 用于材料试验机械的位移测量系统和装置验证的标准规程

Testing machines that apply and measure displacement are used in many industries. They may be used in research laboratories to determine material properties, and in production lines to qualify products for shipment. The displacement measuring devices integral to the testing machines may be used for measurement of crosshead or actuator displacement over a defined range of operation. The accuracy of the displacement value shall be traceable to the National Institute of Standards and Technology (NIST) or another recognized National Laboratory. Practices E 2309 provides a procedure to verify these machines and systems, in order that the measured displacement values may be traceable. A key element to having traceability is that the devices used in the verification produce known displacement characteristics, and have been calibrated in accordance with adequate calibration standards.1.1 These practices cover procedures and requirements for the calibration and verification of displacement measuring systems by means of standard calibration devices for static and quasi-static testing machines. This practice is not intended to be complete purchase specifications for testing machines or displacement measuring systems. Displacement measuring systems are not intended to be used for the determination of strain. See Practice E 83.1.2 These procedures apply to the verification of the displacement measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the displacement-measuring system(s) to be verified.1.3 Since conversion factors are not required in this practice, either SI units, or inch units, can be used as the standard.1.4 Displacement values indicated on displays/printouts of testing machine data systems-be they instantaneous, delayed, stored, or retransmitted-which are within the Classification criteria listed in , comply with Practices E 2309.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

KS B ISO 7500-2:2004 金属材料.静态单轴向试验机的校正.第2部分:拉伸蠕变试验机对作用负载力的校验

이 규격은 ISO 204에 따른 인장시 일축 크리프 시험용으로 사용되는 시험기에 대한 검증

Metallic materials-Verification of static uniaxial testing machines-Part 2:Tension creep testing machines-Verification of the applied load

DIN EN ISO 7500-1:2004 金属材料.静态单轴向试验机的验证.第1部分:拉伸/压缩试验机.力测量系统的验证和校正

This part of ISO 7500 specifies the verification of tensile and compression testing machines.

Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004); German version EN ISO 7500-1:2004