N77 超声波与声放射探伤仪器 标准查询与下载
共找到 97 条与 超声波与声放射探伤仪器 相关的标准，共 7 页
本标准规定了金属磁记忆检测仪(以下简称仪器)的性能试验方法。本标准适用于数字式金属磁记忆检测仪。
Non-destructive testing instruments.Metal magnetic memory instrument verification
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-31
- 实施
- 2014-07-01
本标准规定了金属磁记忆检测仪(以下简称仪器)的术语和定义、技术要求、检验规则和标志、包装、运输和贮存等内容。本标准适用于数字式金属磁记忆检测仪。
Non-destructive testing instruments.Metal magnetic memory instrument specification
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 11603的本部分规定了单通道或多通道声发射设备性能的常规验证方法。本部分适用于单通道或多通道声发射设备。
Non-destructive testing instruments.Acoustic emission.Equipment characterization.Part 2: Verification of operating characteristic
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-31
- 实施
- 2014-07-01
JB/T 11603的本部分规定了构成一个声发射监测系统的主要组成部分:--信号检测;--信号调理;--信号测量;--分析及结果输出。本部分适用于单通道或多通道声发射设备。
Non-destructive testing instruments.Acoustic emission.Equipment characterization.Part 1: Equipment description
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-31
- 实施
- 2014-07-01
Non-destructive testing. Equipment for eddy current examination. Instrument characteristics and verification
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-31
- 实施
- 2013-12-31
Non-destructive testing. Equipment for eddy current examination. Probe characteristics and verification
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-31
- 实施
- 2013-12-31
Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: combined equipment
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-12-06
- 实施
- 2013-12-06
Non-destructive testing. Characterization and verification of ultrasonic examination equipment. Combined equipment
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-11-30
- 实施
- 2013-11-30
Non-destructive testing. Ultrasonic testing. Characterization and verification of ultrasonic thickness measuring equipment
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013-11-30
- 实施
- 2013-11-30
Ultrasonics - Power measurement - Radiation force balances and performance requirements (IEC 61161:2013); German version EN 61161:2013
- ICS
- 17.140.50
- CCS
- N77
- 发布
- 2013-11
- 实施
- 2013-11-01
This British Standard gives recommendations and guidance on the selection, installation, operation and calibration of transit time ultrasonic flowmeters (USMs) for industrial gas applications (including flare gas). It is applicable only to those devices in which the entire gas stream flows through the body of the USM and the transducers (wetted or invasive type), or a wetted interface, are in contact with the fluid. This includes full-bore/reduced-bore and insertion type meters employing direct or reflective paths. It is also applicable to "dirty gases", i.e. those contaminated with solids and/or liquids in sufficiently small quantities, depending upon the application. It is not applicable to clamp-on/externally mounted, domestic or stack/chimney (combustion exhaust) meters.
Guide to the selection, installation, operation and calibration of diagonal path transit time ultrasonic flowmeters for industrial gas applications
- ICS
- 17.120.10
- CCS
- N77
- 发布
- 2013-10-31
- 实施
- 2013-10-31
IEC/TS 62791: Ultrasonics - Pulse-echo scanners - Low-echo sphere phantoms and methods for performance testing of gray-scale medical ultrasound scanners applicable to a broad range of transducer types
- ICS
- 11.040.55
- CCS
- N77
- 发布
- 2013-09
- 实施
Standard for the Performance of Portable Transmission X-Ray Systems for Use in Improvised Explosive Device and Hazardous Device Identification
- ICS
- 17.240
- CCS
- N77
- 发布
- 2013-01-01
- 实施
This European Standard specifies methods and acceptance criteria for assessing the performance of instruments for measuring thickness using pulse-echo ultrasound. This European Standard covers both direct (digital) reading and waveform display types using single or dual element probes. This European Standard may be used for verifying equipment covered by EN 12668-1, EN 12668-2 and EN 12668-3 when used for thickness measurement.
Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
- ICS
- 19.100
- CCS
- N77
- 发布
- 2013
- 实施
- 2013
本标准规定了多道通A型显示钢轨超声波探伤仪的技术要求、试验方法及检验规则。 本标准适用于新制多通道A型显示钢轨超声波探伤仪。
Rail Ultrasonic Flaw Detector
- ICS
- CCS
- N77
- 发布
- 2012-07-01
- 实施
- 2012-07-01
本标准规定了单通道声阻抗检测仪(以下简称声阻仪)的术语和定义、要求、检验方法、检验规则和标志、包装、运输、贮存等内容。本标准适用于单通道声阻仪，对于多通道或者其他形式的声阻仪可参照执行。
Non-destructive testing instruments - Single channel acoustic impedance instrument
- ICS
- 19.100
- CCS
- N77
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了线阵列涡流探头的技术要求、性能测试、检验规则等内容。 本标准适用于高频2MHz，低频50kHz的线阵列涡流探头。
Non-destructive testing instruments.Eddy current line array probe
- ICS
- 19.100
- CCS
- N77
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本标准规定了压电式超声探伤用直探头、斜探头、双晶探头、液浸探头、表面波探头和可变角探头的型号组成项目、标称频率、压电材料、晶片尺寸、种类、特征等型号命名方法。 本标准适用于压电式超声探伤用探头。
Non-destructive testing instruments.Nomenclatures for models of probes in ultrasonic
- ICS
- 19.100
- CCS
- N77
- 发布
- 2012-05-24
- 实施
- 2012-11-01
本规范规定了具有B型显示功能的相控阵超声探伤仪的计量特性、校准条件和校准方法。适用于相控阵超声探伤仪B型显示模式下的计量特性的校准。
Calibration Specification for Ultrasonic Phased Array Flaw Detectors
- ICS
- CCS
- N77
- 发布
- 2012-03-20
- 实施
- 2012-06-20
本标准规定了声发射检测仪的技术要求、检测方法、检测规则、标志与包装等内容。 本标准适用于单通道声发射检测仪（以下简称声发射仪）的技术条件。对于多通道声发射仪的相关部分也可参照使用。
Non-destructive testing instruments. Specifications for one-channel acoustic emission testing instrument
- ICS
- 19.100
- CCS
- N77
- 发布
- 2011-12-20
- 实施
- 2012-04-01
