P16 工程防火 标准查询与下载

BS PD 7974-5:2014 消防安全工程原则在建筑设计中的应用.消防和救援服务干预（子系统5）

Application of fire safety engineering principles to the design of buildings. Fire and rescue service intervention (Sub-system 5)

BS EN 13381-1:2014 测定结构构件耐火作用的试验方法.水平防火薄板

Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes

DB37/ 242-2014 建筑消防设施安装质量检验评定规程

Regulations for quality inspection and evaluation of building fire protection facilities installation

BS ISO 14934-4:2014 燃烧试验.热流计的校准和使用.燃烧试验用热流计的使用指南

Fire tests. Calibration and use of heat flux meters. Guidance on the use of heat flux meters in fire tests

DIN EN 13501-6:2014 建筑产品和建筑构件的防火等级分类. 第6部分: 采用对电缆燃烧试验的反应所得数据进行的分类; 德文版本EN 13501-6-2014

Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables; German version EN 13501-6:2014

EN 15269-5:2014 防火性测试结果的扩展应用/门,百叶窗及可开式窗户的装备包括建筑五金零件的烟气控制.第5部分:铰链式旋开型金属构架加釉门及可开式窗

This European Standard covers hinged and pivoted steel (any kind) and aluminium based framed, glazed doorsets or openable windows. This European Standard prescribes the methodology for extending the application of test results obtained from resistance to fire test(s) conducted in accordance with EN 1634-1. Subject to the completion of the appropriate test or tests selected from those identified in Clause 4 the extended application may cover all or some of the following examples:- integrity (E), integrity/radiation (EW) or integrity/insulation (EI1 or EI2) classifications; - doorsets and openable windows; - door / window leaf (leaves); - glazing and non-glazed panels in doorset and openable window; - items of building hardware; - decorative finishes; - intumescent, smoke, draught or acoustic seals; - alternative supporting construction(s).

Extended application of test results for fire resistance and/or smoke control for door@ shutter and openable window assemblies@ including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and

DB45/T 989-2014 建设工程消防检测规程

Regulations for fire detection of construction projects

DIN EN 1364-4:2014 非承重构件的耐火试验. 第4部分: 幕墙. 部分结构; 德文版本EN 1364-4-2014

Fire resistance tests for non-loadbearing elements - Part 4: Curtain walling - Part configuration; German version EN 1364-4:2014

DIN EN 1364-3:2014 非承重构件的耐火试验. 第3部分: 幕墙. 整体结构(完整组合); 德文版本EN 1364-3-2014

Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly); German version EN 1364-3:2014

BS EN 13501-6:2014 施工用品和建筑构件的防火性能分类. 电缆对火反应试验使用的数据分类

Fire classification of construction products and building elements. Classification using data from reaction to fire tests on electric cables

DIN CEN/TS 16459:2014 屋顶和屋顶覆盖物外部防火.源自CEN/TS 1187标准试验结果的扩展应用.德文版本CEN/TS 16459-2013

External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187; German version CEN/TS 16459:2013

ISO 834-10:2014 耐火试验. 建筑结构构件. 第10部分: 确定施用于结构钢构件的防火材料贡献率的特殊要求

Fire resistance tests - Elements of building construction - Part 10: Specific requirements to determine the contribution of applied fire protection materials to structural steel elements

BS ISO 834-11:2014 耐火试验. 房屋建筑构件. 结构钢构件防火评估的具体要求

Fire resistance tests. Elements of building construction. Specific requirements for the assessment of fire protection to structural steel elements

BS EN 1364-4:2014 非承重构件的耐火试验. 幕墙. 部分结构

Fire resistance tests for non-loadbearing elements. Curtain walling. Part configuration

ISO 13784-1:2014 夹层板建筑系统对火反应的试验.第1部分:小室试验方法

This part of ISO 13784 specifies a method of test for determining the reaction to fire behaviour of sandwich panel building systems, and the resulting flame spread on or within the sandwich panel building construction, when exposed to heat from a simulated internal fire with flames impinging directly on the internal corner of the sandwich panel building construction. The test method described is applicable to free-standing, self-supporting, and frame-supported sandwich panel systems. This part of ISO 13784 is not intended to apply to sandwich panel products which are glued, nailed, bonded, or similarly supported by an underlying wall or ceiling construction. For products used as internal linings, the ISO 9705 test method should be used. This part of ISO 13784 provides for small room testing of sandwich panel building systems. For largeroom testing of sandwich panel building systems, ISO 13784-2 should be used. This method is not intended to evaluate the fire resistance of a product, which should be tested by other means. NOTE Because of their design, some systems may be unsuitable for testing with this part of ISO 13784. These systems may be suitable for testing with ISO 13784-2 and the latter test method should be considered. In this case application area of the test report is restricted.

Reaction to fire test for sandwich panel building systems - Part 1: Small room test

BS EN 15254-6:2014 耐火性试验结果的扩展应用. 非承重墙. 幕墙

Extended application of results from fire resistance tests. Non-loadbearing walls. Curtain walling

BS EN 1634-1:2014 门, 百叶窗组件, 可开启窗口和建筑五金件的防火和防烟控制试验. 门, 百叶窗组件和可开启窗口的防火试验

Fire resistance and smoke control tests for door and shutter assemblies, openable windows and elements of building hardware. Fire resistance test for door and shutter assemblies and openable windows

BS EN 1364-3:2014 非承重构件的耐火试验. 幕墙. 完整配置 (完整组装)

Fire resistance tests for non-loadbearing elements. Curtain walling. Full configuration (complete assembly)

DB45/T 973-2014 建筑消防设计规范 第1部分：南宁市民用建筑

Building Fire Design Code Part 1: Civil Buildings in Nanning

ASTM E119-14 建筑结构和材料防火试验的标准试验方法

4.1 These test methods are intended to evaluate the duration for which the types of building elements noted in 1.1 contain a fire, retain their structural integrity, or exhibit both properties during a predetermined test exposure. 4.2 The test exposes a test specimen to a standard fire controlled to achieve specified temperatures throughout a specified time period. When required, the fire exposure is followed by the application of a specified standard fire hose stream applied in accordance with Practice E2226. The test provides a relative measure of the fire-test-response of comparable building elements under these fire exposure conditions. The exposure is not representative of all fire conditions because conditions vary with changes in the amount, nature and distribution of fire loading, ventilation, compartment size and configuration, and heat sink characteristics of the compartment. Variation from the test conditions or test specimen construction, such as size, materials, method of assembly, also affects the fire-test-response. For these reasons, evaluation of the variation is required for application to construction in the field. 4.3 The test standard provides for the following: 4.3.1 For walls, partitions, and floor or roof test specimens: 4.3.1.1 Measurement of the transmission of heat. 4.3.1.2 Measurement of the transmission of hot gases through the test specimen. 4.3.1.3 For loadbearing elements, measurement of the load carrying ability of the test specimen during the test exposure. 4.3.2 For individual loadbearing members such as beams and columns: 4.3.2.1 Measurement of the load carrying ability under the test exposure with consideration for the end support conditions (that is, restrained or not restrained). 4.4 The test standard does not provide the following: 4.4.1 Information as to performance of test specimens constructed with components or lengths other than those tested. 4.4.2 Evaluation of the degree by which the test specimen contributes to the fire hazard by generation of smoke, toxic gases, or other products of combustion. 4.4.3 Measurement of the degree of control or limitation of the passage of smoke or products of combustion through the test specimen. 4.4.4 Simulation of the fire behavior of joints between building elements such as floor-wall or wall-wall, etc., connections.

Standard Test Methods for Fire Tests of Building Construction and Materials