Q33 建筑玻璃 标准查询与下载

EN 15752-1:2014 建筑用玻璃.粘合剂涂底的聚合物膜.第1部分:定义及要求

This European Standard defines adhesive backed polymeric film based on biaxially oriented polyester film, and the performance characteristics of adhesive backed polymeric film for use on glass in buildings. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to other glass or glazing products, e. g. laminated glass or insulating glass units, when adhesive backed polymeric film is included as part of the original assembly or manufacture of the glazing product. These additional requirements are specified in the appropriate product standard. Adhesive backed polymeric film, in this case, does not lose its mechanical or thermal characteristics.

Glass in building - Adhesive backed polymeric film - Part 1: Definitions and requirements

EN 15755-1:2014 建筑用玻璃.粘合剂聚合物的贴膜玻璃.第1部分:定义及要求

This European Standard defines the characteristics, properties and classification of adhesive backed polymeric filmed glass, i.e. glass product that has had an adhesive backed polymeric film applied, for use in buildings. The adhesive backed polymeric film is based on biaxially oriented polyester film as defined in EN 15752-1. This applies to both site and factory applications. This European Standard does not apply to adhesive backed polymeric films manufactured using polyvinylchloride (PVC). Other requirements, not specified in this standard, may apply to adhesive backed polymeric filmed glass that is incorporated into assemblies, e. g. laminated glass or insulating glass units. The additional requirements are specified in the appropriate product standard. Adhesive backed polymeric filmed glass, in this case, does not lose its mechanical or thermal characteristics.

Glass in building - Adhesive backed polymeric filmed glass - Part 1: Definitions and requirements

BS EN 13022-1:2014 建筑玻璃.建筑密封玻璃.第1部分:支撑和无支撑单层和多层玻璃的建筑密封玻璃系统用玻璃制品

Glass in building. Structural sealant glazing. Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

BS EN 13022-2:2014 建筑玻璃.建筑密封玻璃.安装规则

Glass in building. Structural sealant glazing. Assembly rules

EN 13022-1:2014 建筑玻璃.建筑密封玻璃.第1部分:玻璃制品结构密封胶玻璃系统的支持和不支持的单片和多层玻璃

This European Standard specifies requirements for the suitability for use of supported and unsupported glass products for use in "Structural Sealant Glazing" (SSG) applications. This European Standard on glass products is considered as a supplement to the requirements specified in the corresponding standards with regard to verifying the suitability for use in SSG systems. Only soda lime silicate glasses are taken into consideration in this European Standard. Plastic glazing is excluded from the scope of this European Standard. Any glass products meeting the requirements of this European Standard are suitable for use in SSG systems as defined in ETAG 002 "Structural sealant glazing system". All glass products are installed and bonded into the support under controlled environmental conditions as described in Clause 5 of EN 13022-2:2014. When the outer seal of the insulating glass unit has a structural function and/or is exposed to UV radiation without any protection, only silicone based sealant are permitted in the construction of the unit.

Glass in building - Structural sealant glazing - Part 1: Glass products for structural sealant glazing systems for supported and unsupported monolithic and multiple glazing

EN 13022-2:2014 建筑玻璃.建筑密封玻璃.第2部分:装配规则

This European Standard deals with the assembling and bonding of glass elements in a frame, window, door or curtain walling construction, or directly into the building by means of structural bonding of the glass element into or onto framework or directly into the building. It gives information to the assembler to enable him to organize his work and comply with requirements regarding quality control. Structural sealant glazing can be incorporated into the façades (curtain walls, doors and windows) or roofs as follows:- either vertically; or; - up to 7° from the horizontal, i.e. 83° from the vertical. This European Standard only deals with the bonding to glass surfaces, i.e. coated or uncoated or enamelled, and metallic surfaces, i.e. aluminium (anodised or coated), stainless steel, as considered in G.2 of EN 15434:2006+A1:2010.

Glass in building - Structural sealant glazing - Part 2: Assembly rules

KS L 2016-2014 玻璃窗胶膜

이 표준은 사무실, 점포, 주택 등(이하 건축물이라 한다.)의 창 유리에 붙여 옥내의 냉방 및 온방 효과를 높이기 위한 태양열 차폐용 필름 및 충돌, 지진, 폭발에 의해 건축물의 창 유리가 비산 낙하하는 것을 경감하기 위한 유리 비산 방지용 필름과 그 양쪽을 겸한 태양열 차폐ㆍ유리 비산 방지용 필름(이하 필름이라 한다.)에 대하여 규정한다.

Adhesive films for glazings

JIS R 3206 AMD 1:2014 淬火玻璃(修改件1)

Tempered glass (Amendment 1)

JIS R 3204:2014 夹丝玻璃

Wired glass

KS L 2004-2014 层压玻璃

이 표준은 주로 내부 칸막이(샤워부스 등) 및 주 출입문, 쇼윈도우, 전시장, 승강기, 난간대, 천장, 계단, 바닥, 캐노피, 교육시설의 창 등 건축물 내 안전을 요하는 주요부와 선박의 창, 가구, 방음판 등에 사용하는 접합 유리1)에 대하여 규정한다.

Laminated glass

DIN EN 15683-2:2014 建筑玻璃.热韧性钠钙硅酸盐槽道形状安全玻璃.第2部分:合格评价/产品标准.德文版本EN 15683-2-2013

Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 2: Evaluation of conformity/Product standard; German version EN 15683-2:2013

DB32/ 2623-2014 大豆油生产主要工序单位产品能耗限额及计算方法

本标准规定了大豆油生产主要工序单位产品能源消耗（以下称能耗）限额的术语和定义、能耗限额、统计范围、计算方法及主要节能管理措施。 本标准适用于大豆油生产企业能耗的计算、考核与评价，以及对新建、改扩建项目的能耗控制。

The energy consumption limit and calculation method of unit product in the main process of soybean oil production

DB32/ 2624-2014 合成洗衣粉单位产品能耗限额及计算方法

本标准规定了合成洗衣粉单位产品能源消耗（以下称能耗）限额的术语和定义、能耗限额、统计范围、计算方法及主要节能管理措施。 本标准适用于由表面活性剂及其它添加剂生产洗衣粉的企业能耗的计算、考核与评价，以及对新建、改扩建项目的能耗控制。

Energy consumption limit and calculation method for unit product of synthetic washing powder

DIN EN 15683-1:2014 建筑玻璃.热韧性钠钙硅酸盐槽道形状安全玻璃.第1部分:定义和描述.德文版本EN 15683-1-2013

Glass in building - Thermally toughened soda lime silicate channel shaped safety glass - Part 1: Definition and description; German version EN 15683-1:2013

GOST 33002-2014 玻璃和玻璃制品. 机械特性的测定方法. 破碎试验

Glass and glass products. Methods for determination of mechanical properties. Fragmentation test

GOST 33001-2014 玻璃和玻璃制品. 机械特性的测定方法. 耐磨性的测定

Glass and glass products. Methods for determination of mechanical properties. Determination of resistance to abrasion

GOST 33004-2014 玻璃和玻璃制品. 特征. 术语和定义

Glass and glass products. Characteristics. Terms and definitions

ASTM C212-14 建筑用饰面瓷砖的标准规格

1.1 This specification covers structural clay load-bearing facing tile. Structural facing tile are tile designed for use in interior and exterior unplastered walls and partitions of buildings. 1.2 The property requirements of this specification apply at the time of purchase. The use of results from testing of tile extracted from masonry structures for determining conformance or nonconformance to the property requirements (Section 6) of this standard is beyond the scope of this specification. 1.3 Tile covered by this specification are manufactured from clay, shale, or similar naturally occurring substances and subjected to a heat treatment at elevated temperatures (firing). The heat treatment must develop sufficient fired bond between the particulate constituents to provide the strength and durability requirements of this specification. (See firing and fired bond in Terminology C1232.) 1.4 The text of this specification references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in tables and figures) shall not be considered as requirements of the specification. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.

Standard Specification for Structural Clay Facing Tile

GOST 33088-2014 玻璃和玻璃制品. 防潮试验方法

Glass and glass products. Humidity resistance test method

GOST EN 675-2014 玻璃和玻璃制品. 热性能测定方法. 使用热流计法进行的热电阻测定

Glass and glass products. Thermal properties determination methods. Thermal resistance determination by heat flow meter method