Q51 石墨材料 标准查询与下载

ASTM C611-21 室温下炭加工品及石墨制品的电阻率的标准试验方法

1.1?This test method covers the determination of the electrical resistivity of manufactured carbon and graphite articles at room temperature. 1.2?The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3?This

Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

YB/T 4745-2019 电火花加工用等静压石墨

Isostatic graphite for EDM

JC/T 2508-2019 摩擦材料用人造石墨

Artificial graphite for friction materials

YB/T 5053-2018 石墨阳极

graphite anode

YB/T 4667-2018 超高导热石墨块

Ultra high thermal conductivity graphite block

DB23/T 2068-2018 低油超薄石墨 纸的技术条件

Technical conditions of low-oil ultra-thin graphite paper

YB/T 5289-2017 电极糊延伸率试验方法

Electrode paste elongation test method

YB/T 4625-2017 高炉水冷管用石墨瓦

Graphite tiles for blast furnace water-cooled tubes

YB/T 917-2017 炭素材料 钒含量的测定 3,3-二甲基联萘胺比色法

Determination of vanadium content in carbon materials using 3,3-dimethylbinaphthylamine colorimetric method

YB/T 5292-2017 高炉炭块氧化性试验方法

Test method for oxidizing properties of blast furnace carbon blocks

ANSI/ASTM C714:2017 热脉动法进行碳和石墨热扩散的试验方法

Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

YB/T 4590-2017 硅材料用高纯石墨制品中杂质含量的测定 电感耦合等离子体发射光谱法

Determination of impurity content in high-purity graphite products for silicon materials by inductively coupled plasma optical emission spectrometry

JIS R 7222:2017 石墨材料的物理性能试验方法

Test methods for physical properties of graphite materials

ASTM C714-17 采用热脉冲法测定碳和石墨热扩散性的标准试验方法

5.1 Thermal diffusivity is an important property required for such purposes as design applications under transient heat flow conditions, determination of safe operating temperature, process control, and quality assurance. 5.2 The flash method is used to measure values of thermal diffusivity (α) of a wide range of solid materials. It is particularly advantageous because of the simple specimen geometry, small specimen size requirements, rapidity of measurement, and ease of handling materials having a wide range of thermal diffusivity values over a large temperature range with a single apparatus. The short measurement times involved reduce the chances of contamination and change of specimen properties due to exposure to high temperature environments. 5.3 Thermal diffusivity results in many cases can be combined with values for specific heat (Cp) and density (ρ) to derive thermal conductivity (λ) from the relation λ = αCpρ. For guidance on converting thermal diffusivity to thermal conductivity, refer to Practice C781. 5.4 This test method can be used to characterize graphite for design purposes. 5.5 Test Method E1461 is a more detailed form of this test method and has applicability to much wider ranges of materials, applications, and temperatures. 1.1 This test method covers the determination of the thermal diffusivity of carbons and graphite at temperatures up to 5008201;°C. It requires only a small easily fabricated specimen. Thermal diffusivity values in the range from 0.048201;cm2/s to 2.08201;cm2/s are readily measurable by this test method; however, for the reason outlined in Section 7, for materials outside this range this test method may require modification. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

YB/T 5156-2016 高纯石墨制品中硅的测定 硅-钼蓝分光光度法

Determination of Silicon in High Purity Graphite Products Silicon-Molybdenum Blue Spectrophotometry

YB/T 5157-2016 高纯石墨制品中铁的测定 邻二氮菲分光光度法

Determination of iron in high-purity graphite products by phenanthroline spectrophotometry

JC/T 2315-2016 球化天然石墨

Spheroidized natural graphite

YB/T 099-2016 石墨电极焙烧品

本标准规定了石墨电极焙烧品的术语和定义、分类和代号、外形尺寸、技术要求、试验方法、检验规则、标记、包装、标志、储存、运输及质量证明书。 本标准适用于制造超高功率石墨电极、高功率石墨电极和普通功率石墨电极(以下统称石墨电极)的炭质焙烧品。

Baked compact for graphite electrode

ASTM C838-16 人造碳及石墨块体积密度的标准试验方法

4.1 This test method provides a means of determining bulk density on as-manufactured logs, blocks, or shaped articles. 4.2 This test method is suitable for manufacturing control and acceptance specifications. 4.3 Test Method C559 may be used when a higher degree of accuracy is required. 1.1 This test method covers the determination of the density of as-manufactured carbon and graphite from measurements of mass and dimensions at room temperature. 1.2 This test method is applicable to boronated carbon and graphite. 1.3 This test method is not applicable to carbon- and graphite-containing materials that are thermally unstable at or below temperatures of 2008201;°C. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

ASTM C559-16 通过制造碳和石墨制品的物理测量体积密度的标准试验方法

4.1 Bulk density as determined by this test method is a basic material property of importance in manufacturing and application of carbon and graphite. 4.2 This test method can be used for quality and process control, material characterization and description, and other purposes. 1.1 This test method covers the determination of the bulk density of manufactured articles of carbon and graphite of at least 5008201;mm3 volume. The bulk density is calculated to an accuracy of 0.258201;%, using measurements of mass and dimensions in air at 258201;°C ± 58201;°C. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles