Q91 制砖与制瓦设备 标准查询与下载

JC/T 921-2014 蒸压加气混凝土切割机

本标准规定了蒸压加气混凝土切割机的术语和定义、型式、型号和基本参数、要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于生产建筑材料制品的蒸压加气混凝土切割机(以下简称切割机)。

Cutting machine for autoclaved aerated concrete

JC/T 2262-2014 墙材工业用翻坯机组

本标准规定了墙材工业用翻坯机组(以下简称翻坯机组)的术语和定义、型式、型号和基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于墙材工业用翻坯机组。

Brick turning machine

JC/T 2261-2014 墙材工业用自动卸砖机

本标准规定了墙材工业用自动卸砖机(以下简称卸砖机)的型式、型号和基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。本标准适用于装卸砖和砌块用自动卸砖机。

Building industrial brick unloading machine

DB31/696-2013 蒸压加气混凝土砌块（板）单位产品综合能源消耗限额

Comprehensive energy consumption quota per unit product of autoclaved aerated concrete blocks (slabs)

JC/T 343-2012 真空挤出机

本标准规定了真空挤出机的型式、型号与基本参数、技术要求、试验方法、检验规则以及标牌、包装、运输和贮存等。 本标准适用于烧结普通砖、烧结多孔砖、烧结空心砖和空心砌块及类似制品的真空挤出成型设备。

Vacuum extruder

DB31/T 665-2012 免煅烧脱硫石膏基胶凝材料

Calcination-free desulfurization gypsum-based cementitious material

JC/T 660-2011 墙材工业用自动切条机

本标准规定了墙材工业用自动切条机（以下简称自动切条机)的型式、型号和基本参数、技术要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于墙材工业用自动切条机。

Automatic slit cutter used in wall material industry

JC/T 662-2011 墙材工业用搅拌挤出机

本标准规定了墙材工业用搅拌挤出机（以下简称搅拌挤出机）的型式、型号、基本参数、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于烧结砖瓦、砌块行业搅拌挤出已经破碎的符合工艺要求原料用的搅拌挤出机。

Mixing-extruder used in wall materials industry

JC/T 920-2011 建材工业用砌块成型机

本标准规定了建材工业用砌块成型机（以下简称砌块成型机）的术语和定义、型式、型号和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于采用振动加压成型原理，用干硬性混凝土生产砌块、多孔砖、路面砖等混凝土制品的成型机。

Architecture material industry concrete block machine

JC/T 2043-2011 墙材工业用摆渡车

本标准规定了墙材工业用摆渡车（以下简称摆渡车）的型号和基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于墙材工业用摆渡车。

Transfer car for kiln car used in wall material industry

JC/T 2044-2011 墙材工业用出口拉引机

本标准规定了墙材工业用出口拉引机（以下简称拉引机)的型式、型号和基本参数、技术要求、试验方法以及检验规则、标志、包装、运输和贮存等。 本标准适用于墙材工业用出口拉引机。

Exit-end tractor used in wall material industry

JC/T 2045-2011 墙材工业用液压顶车机

本标准规定了墙材工业用液压顶车机（以下简称顶车机)的型式和型号、基本参数、技术要求、试验 方法、检验规则、标志、包装、运输和贮存。 本标准适用于墙材工业用液压顶车机。

Hydraulic pusher used in wall material industry

JC/T 2042-2011 烧结砖自动化控制系统通用技术条件

本标准规定了烧结砖自动化控制系统（以下简称自动化控制系统）的型式和型号、技术要求、验收要求、检验规则以及标志、包装、运输和贮存等。 本标准适用于烧结砖自动化控制系统。

General technical specifications of automatic control system in sintered brick producing field

DIN EN 772-1:2011 圬工设施试验方法.第1部分:耐压强度的测定;德文版本EN 772-1-2011

This European Standard specifies a method for determining the compressive strength of masonry units.

Methods of test for masonry units - Part 1: Determination of compressive strength; German version EN 772-1:2011

JC/T 2035-2010 蒸压砖自动码垛机

本标准规定了蒸压砖自动码垛机的术语和定义、分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于夹送蒸压砖的自动码垛机。

Stacking machine of autoclaved brick

JC/T 2034-2010 蒸压砖自动液压机

本标准规定了蒸压砖自动液压机的术语和定义、分类、技术要求、试验方法、检验规则及标志、包装、运输和贮存等。 本标准适用于以煤灰砂石等为主要原料压力成型的自动液压机。

Automatic hydraulic press of autoclaved brick

KS L 8511-2009 人行道用副产石灰砖

이 표준은 진동압축기 또는 이와 동등 이상으로 품질을 얻을 수 있는 방법에 의하여 폐석회나

Marine facsimile receivers for meteorological chart

KS L 8514-2009 再生结晶化玻璃

이 표준은 중량 기준으로 50 % 이상의 폐유리를 사용하여 결정화한 부분이 포함된 제품으로

Recycled crystalized glass

ASTM C1587-09 测试用现场可移动生产砖石装置和砌块样本制备的标准实施规程

Masonry units and masonry specimens are sometimes removed as part of an assessment of the condition of masonry construction. This document is intended to standardize the preparation of such units and masonry specimens for compressive and flexural bond strength testing. Note 18212;Masonry specimens removed from existing masonry construction (single wythe, multi-wythe or portions thereof) will sometimes contain mortar, grout, reinforcement, or accessory materials. This practice provides information pertaining to the removal of hardened mortar, cleaning, and other special preparation required prior to compressive and flexural bond strength testing of a manufactured masonry unit or masonry specimen that has been removed from usage. This practice does not address test procedures or the use of test results conducted on removed specimens. This practice does not determine whether removed masonry materials met original specification requirements. Note 28212;Compressive and flexural bond strength test results of masonry units and masonry specimens extracted from the field are expected to vary from and will likely be less than test results of masonry units that have not been placed in service or masonry prisms that have been constructed within a controlled environment. Comparison of results of tests conducted on specimens removed from service to those of masonry units prior to use or of constructed prisms is difficult. Considerable judgment is typically required for the selection and preparation of specimens removed from service.1.1 The purpose of this practice is to standardize the preparation of manufactured masonry units and masonry specimens extracted from the field for compressive and flexural bond strength testing in a laboratory environment. 1.2 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing

KS L 8513-2008 再生铸造砂水泥砖

이 표준은 재활용 골재를 주소재로 하고 주로 건축물에 사용하는 콘크리트 벽돌(이하 벽돌이라

Recycled foundry sand concrete brick