R84 交通秩序管理 标准查询与下载

JT/T 1033-2016 交通分隔栏

本标准规定了交通分隔栏的产品组成、分类与标记、技术要求、试验方法、检验规则，以及标志、包装、运输、储存和随行文件。 本标准适用于公路用交通分隔栏产品。城市道路、机场、铁路、广场等场所所用交通分隔栏产品可参照使用。

Traffic divider

GA/T 486-2015 城市道路单向交通组织原则

本标准规定了城市道路单向交通的实施条件、实施要求和实施流程。 本标准适用于城市道路机动车单向交通组织。

Principles of one-way traffic organization on urban roads

GA/T 1271-2015 城市道路路内停车管理设施应用指南

Guidelines for the application of on-street parking management facilities on urban roads

EN 124-5:2015 沟壑和人孔顶部车辆和行人区-第5部分:由复合材料铸成的沟壑和人孔顶部

This European Standard is applicable to manhole tops and gully tops made of composite materials C1, C2 and C3 by using suitably controlled automatic processes that produce a single structure and that do not contain multiple pieces bonded together, with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in- areas which can only be used by pedestrians and pedal cyclists (class A 15); - pedestrian areas and comparable areas, car parks or car parking decks (class B 125); - the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (class C 250), and in addition to manhole tops for use in; - carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (class D 400). This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made of composite materials with frames according to EN 124-2, EN 124-3, EN 124-4 or EN 124-6. This document is not applicable to; - manhole tops and gully tops manufactured by means of hand lay-up method; - gratings/covers as part of prefabricated drainage channels according to EN 1433; - floor and roof gullies in buildings which are specified in EN 1253 (all parts); and; - surface boxes.

Gully tops and manhole tops for vehicular and pedestrian areas - Part 5: Gully tops and manhole tops made of composite materials

EN 124-1:2015 沟壑和人孔顶部车辆和行人区-第1部分:定义、分类、设计的一般原则、性能要求和测试方法

This European Standard is applicable to manhole tops and gully tops with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers installed in areas subjected to pedestrian and/or vehicular traffic. It specifies definitions, classification, general principles of design, performance requirements and test methods for gully tops and manhole tops according to:- EN 124-2, for gully tops and manhole tops made of cast iron; - EN 124-3, for gully tops and manhole tops made of steel or aluminium alloys; - EN 124-4, for gully tops and manhole tops made of steel reinforced concrete; - EN 124-5, for gully tops and manhole tops made of composite materials; - EN 124-6, for gully tops and manhole tops made of polypropylene (PP), polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U). Part 1 is only applicable in combination with at least one of the standards EN 124-2, EN 124-3, EN 124-4, EN 124-5 and EN 124-6 each of which has this Part 1 as an integral part. This European Standard is not applicable to; - gratings/covers as part of prefabricated drainage channels according to EN 1433; - floor and roof gullies in buildings which are specified in EN 1253 (all parts); - surface boxes.

Gully tops and manhole tops for vehicular and pedestrian areas - Part 1: Definitions@ classification@ general principles of design@ performance requirements and test methods

EN 124-6:2015 沟壑和人孔顶部车辆和行人区-第6部分:由丙烯（PP）聚乙烯（PE）或聚氯乙烯（PVC）（PVC－U）复合材料铸成的沟壑和人孔顶

This European Standard applies to manhole tops and gully tops made of Polypropylene (PP), Polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U) by a moulding or extrusion process, with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in- areas which can only be used by pedestrians and pedal cyclists (class A 15), and; - pedestrian areas and comparable areas, car parks or car parking decks (class B 125). This European Standard gives guidance for combinations of covers/grating made of PP, PE or PVC-U with frames according to EN 124-2, EN 124-3, EN 124-4 and EN 124-5. This European Standard is not applicable in isolation but only in combination with EN 124-1. This European Standard is not applicable to; - rodding point covers according to EN 13598-1; - gratings/covers as part of prefabricated drainage channels according to EN 1433; - floor and roof gullies in buildings which are specified in EN 1253 (all parts); - surface boxes.

Gully tops and manhole tops for vehicular and pedestrian areas - Part 6: Gully tops and manhole tops made of polypropylene (PP)@ polyethylene (PE) or unplasticized poly(vinyl chloride) (PVC-U)

EN 124-3:2015 沟壑和人孔顶部车辆和行人区-第3部分:由钢或铝合金铸成的沟壑和人孔顶部

This European Standard is applicable to gully tops and manhole tops made of mild steel, stainless steel and aluminium alloys whether in combination with concrete or not, with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers for installation in areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in- areas which can only be used by pedestrians and pedal cyclists (at least class A 15); - pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125); - the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250); - carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400); - areas imposing high wheel loads, e. g. docks, aircraft pavements (at least class E 600); - areas imposing particularly high wheel loads, e. g. aircraft pavements (class F 900). This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made of steel or aluminium alloys with frames according to EN 124-2 and EN 124-4, EN 124-5 or EN 124-6. Fabrication of manhole tops and gully tops in accordance with this standard is limited to cold forming, mechanical crimping or welding together component parts made of metal plate, strip or bar or rolled or extruded metal sections. This European Standard is not applicable to; - manhole tops and gully tops made of aluminium tread plates for use in carriageways of roads (class D 400) and areas imposing high wheel loads (Classes E 600 and F 900); - concave gratings for class D 400 installed in carriageways of roads or hard shoulders and concave gratings for classes F 900 and E 600; - gratings/covers as part of prefabricated drainage channels according to EN 1433; - floor and roof gullies in buildings which are specified in EN 1253 (all parts); and; - surface boxes.

Gully tops and manhole tops for vehicular and pedestrian areas - Part 3: Gully tops and manhole tops made of steel or aluminium alloys

EN 124-4:2015 沟壑和人孔顶部车辆和行人区-第4部分:由钢筋混凝土铸成的沟壑和人孔顶部

This European Standard is applicable to precast gully tops and manhole tops made of steel reinforced concrete with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in- areas which can only be used by pedestrians and pedal cyclists (at least class A 15); - pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125); - the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250); - carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400); - areas imposing high wheel loads, e. g. docks, aircraft pavements (at least class E 600); - areas imposing particularly high wheel loads, e. g. aircraft pavements (Group 6, class F 900). This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/gratings made of steel reinforced concrete with frames according to EN 124-2, EN 124-3, EN 124-5 and EN 124-6. This European Standard is not applicable to; - concave gratings for class D 400 installed in carriageways of roads or hard shoulders and concave gratings for classes F 900 and E 600; - gratings/covers as part of prefabricated drainage channels according to EN 1433; - floor and roof gullies in buildings which are specified in EN 1253 (all parts); and; - surface boxes.

Gully tops and manhole tops for vehicular and pedestrian areas - Part 4: Gully tops and manhole tops made of steel reinforced concrete

EN 124-2:2015 沟壑和人孔顶部车辆和行人区-第2部分:由生铁铸成的沟壑和人孔顶部

This European Standard is applicable to gully tops and manhole tops made of flake graphite cast iron and/or spheroidal graphite cast iron whether in combination with concrete or not, with a clear opening up to and including 1000 mm for covering gullies, manholes and inspection chambers for installation within areas subjected to pedestrian and/or vehicular traffic. It is applicable to manhole tops and gully tops for use in- areas which can only be used by pedestrians and pedal cyclists (at least class A 15); - pedestrian areas and comparable areas, car parks or car parking decks (at least class B 125); - the area of kerbside channels of roads which, when measured from the kerb edge, extends a maximum of 0,5 m into the carriageway and a maximum of 0,2 m into the pedestrian area (at least class C 250); - carriageways of roads (including pedestrian streets), hard shoulders and parking areas, for all types of road vehicles (at least class D 400); - areas imposing high wheel loads, e. g. docks, aircraft pavements (at least class E 600); - areas imposing particularly high wheel loads, e. g. aircraft pavements (class F 900). This European Standard is not applicable in isolation but only in combination with EN 124-1 and gives guidance for combinations of covers/grating made of cast iron with frames according to EN 124-3, EN 124-4, EN 124-5 or EN 124-6. This European Standard is not applicable to; - cover fillings installed on site, e. g. concrete, paving blocks, etc; - concave gratings for class D 400 installed in carriageways of roads or hard shoulders and concave gratings for classes F 900 and E 600; - gratings/covers as part of prefabricated drainage channels according to EN 1433; - floor and roof gullies in buildings which are specified in EN 1253 (all parts); and; - surface boxes.

Gully tops and manhole tops for vehicular and pedestrian areas - Part 2: Gully tops and manhole tops made of cast iron

JT/T 967-2015 公路蓄能型自发光交通标识

本标准规定了公路蓄能型自发光（长余辉）交通标识的分类、技术要求、试验方法、检验规则以及标志、包装、运输和储存。 本标准适用于我国各级公路上的以长余辉材料为发光材料的蓄能型自发光交通标识。城市道路、行人用绿道、登山步道、机场、港口、铁路、厂矿、住宅区等处设置的蓄能型自发光交通标识可参照使用。

Phosphorescent highway traffic signs

GA/T 1248-2015 道路交通拥堵经济损失评估指南

本标准规定了道路交通拥堵经济损失的评估方法。本标准适用于常态道路交通拥堵或事件引起的道路交通拥堵经济损失评估,也适用于道路交通改善对策、措施的效果评价。

Guidelines for assessing the economic loss of road traffic congestion

DB11/T 1163-2015 公交专用车道设置规范

Specifications for setting up bus lanes

DB11/T 1166-2015 城市轨道交通运营安全管理规范

Urban Rail Transit Operation Safety Management Specifications

GA/T 496-2014 闯红灯自动记录系统通用技术条件

本标准规定了闯红灯自动记录系统的技术要求,以及检验方法、检验规则和安装运行条件等。本标准适用于闯红灯自动记录系统。

General technical specifications for automatic recording systems of red light cameras

DIN CEN/TS 16439:2013 电子收费.安全框架.英文版本CEN/TS 16439-2013

Electronic fee collection - Security framework; English version CEN/TS 16439:2013

CJ/T 429-2013 汽车库和停车场车位引导装置

本标准规定了汽车库和停车场车位引导装置(以下简称车位引导装置)的使用条件、要求、试验方法、检验规则、标志、包装、运输和贮存。本标准适用于在室内使用的,利用超声波原理探测车位实时状态,通过引导信息屏引导机动车驾驶人在汽车库和停车场快速找到空闲车位的引导装置。

Parking guidence device for garages or carpark

ISO 39001:2012 道路交通安全(RTS)管理系统.使用要求指南

Road traffic safety (RTS) management systems - Requirements with guidance for use

JT/T 831-2012 便携式收费机

本标准规定了收费公路使用的便携式收费机的组成和型号、技术要求、试验方法、检验规则和标志、包装、运输与储存等内容。本标准适用于收费公路使用的便携式收费机。

Portable toll collector

DB23/T 1440-2011 机动车闯红灯自动记录系统

Automatic recording system for motor vehicles running red lights

GA/T 900-2010 城市道路施工作业交通组织规范

本标准规定了城市道路施工作业交通组织原则、交通组织要求、交通管理设施设置要求、施工方案要求、交通组织方案编制和交通组织设计流程等。 本标准适用于占用城市道路施工作业期间，施工路段及周边路网的交通组织，不适用于临时和移动施工作业。

Specification of traffic organization for urban road work