S11 线路构件 标准查询与下载

BS EN 13674-2:2006+A1:2010 轨道交通.轨道.铁轨.用于≥46 kg/m与丁字形铁轨连接的转辙器和交叉铁轨

This part of EN 13674 specifies switch and crossing rails that carry railway wheels. These are used in conjunction with Vignole railway rails. This part of this standard is not applicable for the check rails that do not carry railway wheels. Eight pearlitic steel grades are specified covering a hardness range of 200 HBW to 390 HBW and include non heat treated non-alloy steels, non heat treated alloy steels, heat treated non-alloy steels and heat treated low alloy steels. There are !34 rail profiles" specified in this standard, but they may not all be available in all steel grades. Rails specified in EN 13674-1 may also be used as switch and crossing rails and if so used they shall comply with the requirements of EN 13674-1.

Railway applications. Track.Rail. Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above

BS EN 13481-8:2006 轨道交通.轨道.紧固系统的性能要求.重轴荷载的轨道紧固系统

This European Standard is applicable to fastening systems for use on concrete, wood and steel sleepers in main line ballasted track having a radius of curvature greater than 80 m and subject to a maximum design axle load of 350 kN. The requirements apply to:  direct and indirect fastening systems;  fastening systems for the rail sections in EN 13674-1 and EN 13674-4. This European Standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints. This European Standard is for type approval of a complete fastening assembly only.

Railway applications - Track - Performance requirements for fastening systems - Fastening systems for track with heavy axle loads

BS EN 13674-4:2006 轨道交通.轨道.铁轨.27kg/m~46kg/m(但不包括46kg/m)的丁字形铁轨

This part of EN 13674 specifies flat bottom Vignole railway rails from 27 kg/m to, but excluding 46 kg/m. Five pearlitic steel grades are specified covering a rail hardness range of 200 HBW to 390 HBW and include non-heat-treated non-alloy steels, non-heat-treated alloy steels and heat-treated non-alloy steels. There are 13 rail profiles specified in this European Standard, but these may not be available in all steel grades.

Railway applications - Track - Rail - Vignole railway rails from 27 kg/m to, but excluding 46 kg/m

BS EN 13674-2:2006 轨道交通.轨道.铁轨.用于≥46kg/m与丁字形铁轨连接的转辙器和交叉铁轨

This part of EN 13674 specifies switch and crossing rails that carry railway wheels. These are used in conjunction with Vignole railway rails. This part of this standard is not applicable for the check rails that do not carry railway wheels. Eight pearlitic steel grades are specified covering a hardness range of 200 HBW to 390 HBW and include non heat treated non-alloy steels, non heat treated alloy steels, heat treated non-alloy steels and heat treated low alloy steels. There are 30 rail profiles specified in this standard, but they may not all be available in all steel grades. Rails specified in EN 13674-1 may also be used as switch and crossing rails and if so used they shall comply with the requirements of EN 13674-1.

Railway applications - Track - Rail - Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above

BS EN 13674-3:2006 轨道交通.轨道.铁轨.护轨

This European Standard specifies check rail profiles which have been designed for this purpose. It does not cover guard rails which are to protect vehicle, bridge, viaduct and other structures in the event of a derailment. Three grades of steel and five rail profiles are specified.

Railway applications - Track - Rail - Check rails

EN 13848-2:2006 轨道交通.轨迹.轨迹几何质量.第2部分:测量系统.轨迹记录车辆

This European Standard specifies the minimum requirements for measuring principles and systems in order to produce comparable results. It applies to all measuring equipment fitted on dedicated recording vehicles, or on vehicles specifically modified for the same purpose, after the coming into force of the standard. It also defines the requirements of measurement.

Railway applications - Track - Track geometry quality - Part 2: Measuring systems - Track recording vehicles

BS EN 13232-7:2006 轨道交通.轨道.铁道侧线和道岔口.可移动部分的道叉口

The scope of this part is:  to establish a working terminology for crossings with moveable parts, which means crossings with moveable parts to close the gap of the running edge, and their constituent parts, and identify the main types;  to list the minimum informative requirements for the manufacture of crossings with moveable parts and/or their constituent parts;  to formulate codes of practice for inspection and tolerances for crossings with moveable parts and/or their constituent parts;  to establish the limits and extent of supply;  to list the method by which crossings with moveable parts and their constructional parts should be identified and traced;  to list the different and varying ways by which crossings with moveable parts can be described, using the following parameters:  geometry of crossings;  types of construction;  performance requirements;  design criteria;  tolerances and inspection.

Railway applications - Track - Switches and crossings - Crossings with moveable parts

EN 13674-4:2006 轨道交通.轨迹.铁轨.第4部分:大于等于27kg/m小于46kg/m的丁字形铁轨

This part of EN 13674 specifies flat bottom Vignole railway rails from 27 kg/m to, but excluding 46 kg/m. Five pearlitic steel grades are specified covering a rail hardness range of 200 HBW to 390 HBW and include non-heat-treated non-alloy steels, non-heat-treated alloy steels and heat-treated non-alloy steels. There are 13 rail profiles specified in this European Standard, but these may not be available in all steel grades.

Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m Incorporates Amendment A1: 2009

JIS E 1102 AMD 1:2006 铁路轨道用鱼尾板（修改件1）

This translation has been made based on the Amendment to the original Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee in accordance with the Industrial Standardization Law. Consequently, JIS E1102-2001 is partially replaced with this Amendment.

Fish plates for rails (Amendment 1)

JIS E 1101 AMD 1:2006 未处理钢制道岔和交叉口用平底铁轨和特殊轨道（修改件1）

This translation has been made based on the Amendment to the original Japanese Industrial Standard revised by the Minister of Economy,Trade and Industry through deliberations at the Japanese Industrial Standards Committee in accordance with the Industrial Standardization Law. Consequently, JIS E1101-2001 is partially replaced with this Amendment.

Flat bottom railway rails and special rails for switches and crossings of non-treated steel (Amendment 1)

JIS E 3601 AMD 1:2006 钢轨焊接（修改件1）

Rail bonds (Amendment 1)

JIS E 1108 AMD 1:2006 道钉（修改件1）

Rail spikes (Amendment 1)

JIS E 3023 AMD 1:2006 绝缘轨道接头的绝缘材料.试验方法(修改件1)

Insulating materials of insulated rail joint -- Test methods (Amendment 1)

NF F52-010-4:2006 轨道交通.轨道.铁路侧线和道岔口.第4部分:驱动、锁紧和检测

Railway applications - Track - Switches and crossings - Part 4 : actuation, locking and detection.

DIN EN 13232-5:2006 轨道交通.轨道.铁路侧线和道岔口.第5部分:铁路侧线

The scope of this part is to establish a working definition for switches and their constituent parts and identify the main types; to list the minimum informative requirements for the manufacture of the switches and/or constituent parts; to formulate codes of practice for inspection and tolerances of both full and half sets of switches and their constituent parts; to establish the limits and scope of supply; to list the methods by which switches and their parts should be identified and traced.

Railway applications - Track - Switches and crossings - Part 5: Switches; English version of DIN EN 13232-5:2006

DIN EN 13232-6:2006 轨道交通.轨道.铁路侧线和道岔口.第6部分:固定普通和钝角岔道

The scope of the European Standard is to: - establish a working terminology for fixed crossings and their constituent parts, and identify the main types: specify the different and varying ways by which crossings can be described using the following parameters: geometry of the crossing; -- types of construction; -- design criteria; -- manufacturing processes; -- tolerances and inspection.

Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings; English version of DIN EN 13232-6:2006

DIN EN 13232-4:2006 轨道交通.轨道.铁路侧线和道岔口.第4部分:驱动、锁紧和检测

This European Standard determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria of switches and crossing with moveable parts in respect of the interface. It concerns: ~ rules parameters and tolerances for alternative positions of the moveable parts; ~ criteria and limits for the forces which move and restrain the moveable parts.

Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection; English version of DIN EN 13232-4:2006

KS C IEC 62128-2:2005 铁路设施.固定设备.第2部分:直流牵引系统产生的杂散电流影响的防护规定

이 규격에서는 견인 시스템의 동작으로 발생하는 표류 전류의 영향에 대한 보호 규정에 관한

Railway applications－Fixed installations－Part 2：Protective provisions against the effects of stray currents caused by d.c. traction systems

NF F52-010-6:2005 轨道交通.轨道.铁路侧线和道岔口.第6部分:固定普通和钝角岔道

Railway applications - Track - Switches and crossings - Part 6 : fixed common and obtuse crossings.

NF F52-010-5:2005 轨道交通.轨道.铁路侧线和道岔口.第5部分:铁路侧线

Railway applications - Track - Switches and crossings - Part 5 : switches.