S33 走行部分 标准查询与下载

NF F01-116:2001 铁路车辆.轮副和转向架.非动力轴.设计方法

Railway applications - Wheelsets and bogies - Non-powered axles - Design method.

NF F01-117:2001 轨道交通.轮副和转向架.动力轴.设计方法

Railway applications - Wheelsets and bogies - Powered axles - Design method.

TB/T 1618-2001 机车车辆车轴超声波检验

本标准规定了新制铁道机车车辆车轴超声波检验方法和验收规范。 本标准适用于新制车轴材质透声综合性能和内部缺陷的检验。

Ultrasonic Inspection of Rolling Stock Axles

TB/T 1882-2001 铁路机车用粗制轮箍订货技术条件

本标准规定了铁路机车用粗制轮箍的技术要求、试验方法、检验规则、标志、质量证明书及保证等。 本标准适用于速度不大于200k m/h及轴重不大于26 t的机车用碳素钢粗制轮箍的制造、订货和检验。

Technical conditions for ordering rough tires for railway locomotives

TB/T 2015-2001 铁路机车用粗制轮箍型式尺寸

本标准规定了铁路机车用粗制轮箍的型式尺寸、尺寸偏差、形位公差及适用于各型机车的导轮、动轮、从轮和煤水车轮用粗制轮箍的尺寸规格等。 本标准适用于速度不大于200km/h及轴重不大于26t的电力机车、内燃机车、蒸汽机车及煤水车用粗制轮箍。

Type and size of rough tires for railway locomotives

TB/T 3017-2001 机车车辆轴箱滚动轴承在轴箱试验机上的耐久试验方法

本标准规定了铁道机车车辆轴箱滚动轴承在轴箱试验机上的试验方法。 本标准适用于铁道机车车辆轴箱滚动轴承在接近于实际运用的载荷和速度条件下正确运转能力的检验。

Endurance test method for axlebox rolling bearings of rolling stock on axlebox testing machine

TB/T 3015.6-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 轮辋宽度卡尺

Overall dimensions of the overall wheel of railway vehicles Measuring tools Technical conditions Rim width calipers

TB/T 3015.7-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 铁道客车用KKD车轮及货车用HDS车轮辐板形状检查样板

Technical conditions of measuring tools for the overall wheel shape and size of railway vehicles KKD wheels for railway passenger cars and HDS wheel spokes for freight cars Shape inspection samples

TB/T 3015.1-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 滚动圆直径卡尺

Rolling circle diameter calipers

TB/T 3015.2-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 轮辋内径卡尺

Overall dimensions of the overall wheel of railway vehicles Measuring tools Technical conditions Wheel rim inner diameter caliper

TB/T 3015.3-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 内侧辋毂距卡尺

Measuring tools for overall wheel dimensions of railway vehicles Technical conditions Inner rim-hub distance calipers

TB/T 3015.4-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 轮毂外径卡尺

Technical conditions of measuring tools for overall wheel dimensions of railway vehicles Wheel hub outer diameter calipers

TB/T 3015.5-2001 铁道车辆整体车轮外形尺寸检测量具技术条件 轮辋厚度差卡尺

Technical conditions of measuring tools for overall wheel dimensions of railway vehicles Rim thickness difference calipers

BS EN 50207:2001 轨道交通.滚动车辆的电子动力变换器

This European Standard is applicable to power electronic converters mounted on-board railway rolling-stock and intended for supplying: - traction circuits; - auxiliary circuits of power vehicles, coaches and trailers. The application of this standard extends as far as possible to all other traction vehicles including, for example, trolleybuses. This standard covers the complete converter assembly together with its mounting arrangements containing: - semiconductor device assemblies; - integrated cooling systems; - components of the intermediate d.c. link, including any necessary filters associated with the d.c. link; - semiconductor drive units (SDU) and related sensors; - incorporated protection circuits. The following types of power sources are taken into consideration: - a.c. contact lines; - d.c. contact lines; - on-board supplies such as generators, batteries and other electric power sources. This standard excludes converters which supply the electronic control and semiconductor drive units (SDU). NOTE Electronic control equipment of converters and those sensors not related to semiconductor drive units and the printed circuit board assemblies of drive units for power semiconductors (SDU) are covered by EN 50155. This standard defines terminology, service conditions, general characteristics and test methods of electronic power converters onboard of rolling stock.

Railway applications - Electronic power converters for rolling stock

TB/T 2995-2000 铁道车轮和轮箍超声波检验

本标准规定了新制铁道车轮、轮箍超声波检验方法和验收要求 本标准适用于新制铁道车轮、轮箍内部缺陷的超声波检验。

Ultrasonic inspection of railway wheels and tires

TB/T 3000-2000 机车车辆轴箱滚动轴承在轴箱试验机上的热试验方法

本标准规定了铁路机车车辆轴箱滚动轴承在轴箱试验机上的试验方法。 本标准适用于铁路机车车辆轴箱滚动轴承在实际运用的牵引力和速度条件下正确运转能力的检验。

Thermal test method for rolling stock axlebox rolling bearings on axlebox testing machines

JIS E 4504:2000 铁路车辆用轮箍.质量要求

Wheelsets for railway rolling stock -- Quality requirements

TB/T 2983-2000 铁道车轮磁粉检验

本标准规定了新制铁道车轮磁粉检验方法。 本标准适用于新制铁道车轮轮辆和辐板表面缺陷的磁粉检验。

Magnetic particle inspection of railway wheels

BS EN 50125-1:1999 轨道交通.设备环境条件.平板车载设备

This standard intends to define environmental conditions within Europe. NOTE can also be applied elsewhere by agreement. The scope of this standard covers the use of on board electrical, electromechanical and electronic equipment for rolling stock, for the following parameters: Altitude, Temperature, Humidity, Air movement, Rain, Snow and hail, Ice, Solar radiation, Lightning, Pollution, Vibrations and shocks, Electromagnetic interference environment, Acoustic noise environment, Supply system characteristics. In particular the standard defines: - interface conditions between the vehicle and its environment; - general environmental rules for the equipment of rolling stock, especially for the main sub-systems (level 3 -defined by R009-003 of a vehicle (cubicles, cabling, large components, etc.). In this respect it gives general guidance in order to allow the fairness of bid assessments in the process of European Projects. The defined environmental conditions are considered as normal in service; occasionally more severe conditions may be specified. Microclimates surrounding components may be defined by relevant product standards or by special requirements. This standard is not intended to apply to cranes, mining vehicles, cable cars. Passenger effects on the equipment and equipment effect on the passengers are not considered in this standard.

Railway applications. Environmental conditions for equipment. Part 1: Equipment on board rolling stock

TB/T 783-1999 2号车钩用车钩托梁

本标准规定了2号车钩用车钩托梁的型式与尺寸、技术要求及标记等。 本标准适用于装用2号车钩用冲击座的铁道货车。

Coupler joist for No. 2 coupler