T22 承载系统 标准查询与下载

JIS D 4103:1998 汽车零件.圆盘车轮.性能要求和标记

この規格は，自動車に使用する鋼製及び軽合金製ディスクホイール(以下，ホイールという。)について規定する。

Automobile parts -- Disc wheels -- Performance requirements and marking

ISO 4107:1998 商用车辆 轮毂安装尺寸

This International Standard specifies the dimensions necessary for the attachment of a commercial road vehicle wheel on the hub of the vehicle whose fixing has 6, 8 or 10 stud holes. The flat attachment type with centring on central bore in figure 1 and table 1 is the recommended type for future equipment. Other types are currently in use. The specifications do not imply that the wheel is interchangeable from one vehicle to another.

Commercial vehicles - Wheel hub attachment dimensions

ARMY MIL-T-52735 B NOTICE 3-1998 M812型带式浮桥用传输机底盘

This notice should be filed in front of MILT-52735B, dated 21 August 1991.

TRANSPORTER: M812 CHASSIS, FOR RIBBON FLOATING BRIDGE

ARMY MIL-T-53031 A NOTICE 3-1998 M945型带状浮桥用转运车底盘

This notice should be filed in front of MIL-T-53031~, dated 21 August 1991.

TRANSPORTER: M945 CHASSIS, FOR RIBBON FLOATING BRIDGE

ARMY MIL-T-52735 B REINST NOTICE 2-1998 M812型带式浮桥用传输机底盘

This commercial item description covers brown kraft paper used for general wrapping applications.

TRANSPORTER: M812 CHASSIS, FOR RIBBON FLOATING BRIDGE

ARMY MS500048 REV A NOTICE 1-1998 轻型.中型和重型汽车牵引杆(用于2 1/2 吨.大于等于50吨的汽车)

This notice should be filed in fiont of MS500048~d, ated 13 December1 991.

TOWBAR, MOTOR VEHICLE: LIGHT, MEDIUM AND HEAVY DUTY (FOR VEHICLES 2 1/2 TO 50 TONS& HEAVIER)

SAE J2315-1998 车轮螺母座强度

The purpose of this test is to evaluate the axial strength of the nut seat of wheels intended for use on passenger cars, light trucks, and multipurpose vehicles. In addition, a minimum contact area is recommended to ensure enough strength for the rotational force in tightening a nut against the nut seat. While this test ensures the minimum strength of the nut seat, the wheel must also have a degree of flexibility. This flexibility, as well as bolt tension, are important to maintain wheel retention.

Wheel Nut Seat Strength

NAVY MIL-R-22622 A NOTICE 1-1998 7A及7B航空系列飞机的喷射器及炸弹的机架

RACK, BOMB, EJECTOR, AIRCRAFT; AERO 7A AND AERO 7B SERIES

RACK, BOMB, EJECTOR, AIRCRAFT; AERO 7A AND AERO 7B SERIES

SAE J2316-1998 乘用车和轻型卡车轮用螺母座强度试验方法和性能要求

This SAE Recommended Practice provides minimum performance requirements and uniform procedures for nut seat system strength of wheels intended for normal highway use on passenger cars, light trucks, (except dual wheels, which are covered by SAE J1965) and multipurpose passenger vehicles. The nut seat system includes the wheel, wheel bolts, and wheel nuts as applicable. Many factors must be considered in design and validation of wheel attachments for each specific vehicle. The individual components should be evaluated per the SAE Standards referenced.

Wheel Nut Seat System Test Procedures and Performance Requirements for Passenger Cars and Light Trucks

QC/T 241-1997 汽车无内胎车轮密封性试验方法

本标准规定了配装无内胎轮胎的汽车车轮的密封性试验方法。 　　本标准适用于配装无内胎轮胎的汽车车轮。

Test method for tightness of automotive tubeless wheels

QC/T 243-1997 车轮安装面平面度要求及测试方法

本标准规定了汽车车轮安装平面面度要求和检验方法。 　　本标准适用于辐板式汽车车轮。

Wheel mounting surface flatness requirements and test methods

QC/T 242-1997 汽车车轮不平衡量要求及测试方法

本标准规定了汽车车轮不平衡量要求及测试方法。 　　本标准适用于辐板式汽车车轮。

Automobile wheel unbalance requirements and test methods

QC/T 240-1997 车轮轮辐在轮毂上安装尺寸的检验方法

本标准规定了GB/T 4095《汽车辐板式车轮在轮毂上的安装尺寸》的基础上，推荐了车轮轮辐在轮毂上安装尺寸的检验方法。 　　本标准适用于汽车车轮轮辐螺栓孔尺寸的检验，也可供其它车轮检验时参考。

Method for checking the mounting dimensions of the wheel spokes on the hub

SAE J2319-1997 针对客车的低速冲击保险杠系统测试规程

The scope of this SAE Recommended Practice is restricted to the testing of original equipment on passenger vehicles and to provide for a uniform industry test procedure. The purpose of this document is to define a test procedure for evaluating bumper systems, utilizing both pendulum and fixed barrier impact testing.

Low-Speed Impact Bumper System Test Procedure for Passenger Vehicles

SAE J1205-1997 卡扣式无内胎轮胎阀性能要求

This SAE Standard for snap-in tubeless tire valves was developed by the qualified engineers in the tire, valve, and automotive industries. It is based upon sound engineering principles, supported by laboratory testing and field experience, to establish acceptable levels of performance criteria for valves. The purpose of this document is to define performance valves for the test procedure of SAE J1206, Methods for Testing Snap-In Tubeless Tire Valves (April 1997).

Performance Requirements for Snap-In Tubeless Tire Valves

AIR FORCE MIL-R-38980 A NOTICE 1-1997 BRU-4A/A型飞机,炸弹喷射器及机架

This notice should be filed in front of MlL-G38980A(USAF), dated 25 March 1970.

RACK, BOMB EJECTOR, AIRCRAFT BRU-4/A AND RACK, BOMB EJECTOR, AIRCRAFT BRU-4A/A

AIR FORCE MIL-S-8784 B NOTICE 1-1997 MAU-50/A型飞机炸弹发射器机架

This notice should be filed in front of MIL-S-8784B, dated 12 April 1971.

SEALING COMPOUND, LOW ADHESION, FOR REMOVABLE PANELS AND FUEL TANK INSPECTION PLATES

ARMY MIL-M-48245 B NOTICE 1-1997 机架模塑化合物

This notice should be filed in front of MIL-M-48245B(AR) dated 2 August 1988

MOLDING COMPOUND, HOUSING

ARMY MIL-DTL-14631 C-1997 私人汽车导板的一般规格

This specification covers the requirements for individual automobile plates used by the Department of the Army and the Department of Defense.(see 6.1).

PLATE, AUTOMOBILE, INDIVIDUAL; GENERAL SPECIFICATION FOR

ASTM D4693-97 润滑脂润滑的车轮轴承低温扭矩的标准试验方法

1.1 This test method determines the extent to which a test grease retards the rotation of a specially-manufactured, spring-loaded, automotive-type wheel bearing assembly when subjected to low temperatures. Torque values, calculated from restraining-force determinations, are a measure of the viscous resistance of the grease. This test method was developed with greases giving torques of less than 35 N[dot]m at -40176C. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings