T36 电子、电气设备 标准查询与下载

BS ISO 17215-3:2014 道路车辆. 摄像机视频通信接口 (VCIC). 摄像机消息字典

Road vehicles. Video communication interface for cameras (VCIC). Camera message dictionary

BS ISO 17215-4:2014 道路车辆. 摄像机视频通信接口 (VCIC). 通信要求的实施

Road vehicles. Video communication interface for cameras (VCIC). Implementation of communication requirements

SAE J2221-2014 电子线路图用标准符号

This SAE Recommended Practice identifies graphic symbols used in electrical circuit diagrams. The symbols aid troubleshooting electrical systems.

Standardized Symbols for Electrical Circuit Diagrams

SAE J1979-2014 E/E诊断试验模式

SAE J1979 / ISO 15031-5 set includes the communication between the vehicle's OBD systems and test equipment implemented across vehicles within the scope of the legislated emissions-related OBD.

E/E Diagnostic Test Modes

SAE J1628-2014 移动式空调系统使用的制冷剂泄漏检测器技术规程

This SAE Recommended Practice applies to the use of generally available leak detection methods to service motor vehicle passenger compartment air conditioning systems.

Technician Procedures for Refrigerant Leak Detection in Service of Mobile Air Conditioning Systems

SAE J277-2014 机动雪橇供电系统电压设计的维护

This SAE Recommended Practice provides test methods and requirements for maintenance of design voltage in snowmobile electrical systems. It pertains to both battery-equipped and battery-less systems.

Maintenance of Design Voltage - Snowmobile Electrical Systems

SAE J1979DA-2014 E/E诊断试验法的数字附录,J1979-DA

On-Board Diagnostic (OBD) regulations require passenger cars, and light and medium duty trucks, to support communication of a minimum set of diagnostic information to off-board generic test equipment. This document specifies the diagnostic data which may be required to be supported by motor vehicles and external test equipment for diagnostic purposes which pertain to motor vehicle emission-related data. SAE J1979 was originally developed to meet U.S. OBD requirements for 1996 and later model year vehicles. ISO 15031 5 was based on SAE J1979 and was intended to combine the U.S. requirements with European OBD requirements for 2000 and later model year vehicle

J1979-DA, Digital Annex of E/E Diagnostic Test Modes

BS ISO 8820-9:2014 道路车辆. 熔断体. 带有缩短接头的熔断体(K型)

Road vehicles. Fuse-links. Fuse-links with shortened tabs (Type K)

QC/T 198-2014 汽车用开关通用技术条件

本标准规定了汽车用开关的定义、要求、试验方法、检验规则、标志、包装、运输及储存。本标准适用于标称电压12V、24V的汽车用开关(以下简称开关)。

General technical specification for automotive switch

QC/T 29106-2014 汽车电线束技术条件

本标准规定了汽车电线束(以下简称电线束)的要求、试验方法、检验规则、标志、包装、储存和保管。本标准适用于标称电压低于60V的各种汽车用电线束(含单根线组件)。

Technical specification of automobile wire harness

QC/T 220-2014 汽车用易熔线技术条件

本标准规定了汽车用易熔线的定义、要求、试验方法、检验规则、标志、包装、运输及储存。本标准适用于汽车用易熔线(以下简称易熔线)。

Technical specifications for automotive fusible links

QC/T 967-2014 汽油机进气道喷射式喷油器

本标准规定了汽油机进气道喷射式喷油器的术语和定义、要求、试验方法、检验规则、标志、包装、运输和储存。本标准适用于电控燃油喷射发动机用汽油机进气道喷射式喷油器(以下简称“喷油器”)。

Port fuel injector for gasoline engine

ISO 11992-2:2014 道路车辆.牵引车和拖挂车之间电连接数字信息的交换.第2部分:制动和传动装置用应用层

This part of ISO 11992 specifies the parameters and messages for electronically controlled braking systems, including anti-lock braking systems (ABS) and vehicle dynamics control systems (VDC), as well as for running gear equipment (i.e. systems for steering, suspension, and tyres), to ensure that the data communication interchange of information between road vehicles with a maximum authorized total mass greater than 3500 kg and their towed vehicles, including the communication between (several) towed vehicles, on a dedicated network. It does not include any other communication on that network that is not related to the communication between those vehicles.

Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 2: Application layer for brakes and running gear

ISO 8820-9:2014 道路车辆. 熔断体. 第9部分: 带短突片的熔断体(K型)

This part of ISO 8820 specifies fuse-links with shortened tabs (Type K) for use in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements, and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 58 V, a current rating of ≤ 30 A, and a breaking capacity of 1000 A intended for use in road vehicles. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and ISO 8820-2. The numbering of clauses in this part of ISO 8820 corresponds to that of ISO 8820-1.This part of ISO 8820 includes additional or modified requirements that are intended to be applied in addition to those given

Road vehicles - Fuse-links - Part 9: Fuse-links with shortened tabs (Type K)

ISO 11992-4:2014 道路车辆. 牵引和被牵引车辆之间电气连接的数字信息交换. 第4部分: 诊断通信

This part of ISO 11992 specifies the diagnostic communication over a CAN between the towing and towed vehicle(s) of a commercial vehicle and its trailer(s), according to ISO 11992-2 or ISO 11992-3, which allows a diagnostic tester (client) to control diagnostic functions in an on-vehicle ECU (server) embedded in a road vehicle using the communication gateways between the vehicles. It defines the data link layer’s specific implementation of the unified diagnostic communication requirements, mainly given in the ISO 14229 and ISO 15765 document series by additional requirements and restrictions specific to the implementation of UDS on an ISO 11992 network. This part of ISO 11992 does not apply to any non-diagnostic message transmission use of the communication data link between two ECUs.

Road vehicles - Interchange of digital information on electrical connections between towing and towed vehicles - Part 4: Diagnostic communication

BS ISO 11992-2:2014 道路车辆. 牵引和被牵引车辆之间电气连接的数字信息交换. 制动器和传动装置用应用层

Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Application layer for brakes and running gear

BS ISO 17215-1:2014 道路车辆. 摄像机视频通信接口(VCIC). 通用信息和用例定义

Road vehicles. Video communication interface for cameras (VCIC). General information and use case definition

BS ISO 15118-2:2014 道路车辆. 车辆到电网的通信接口. 网络和应用协议要求

Road vehicles. Vehicle-to-Grid Communication Interface. Network and application protocol requirements

BS ISO 11992-4:2014 道路车辆. 牵引和被牵引车辆之间电气连接的数字信息交换. 诊断通信

Road vehicles. Interchange of digital information on electrical connections between towing and towed vehicles. Diagnostic communication

SAE J1939/31-2014 网路层

SAE J1939-31 Network Layer describes the requirements and services for Network Interconnection ECUs (NIECU) that enable electronic control units (ECUs) on a network segment to intercommunicate with other ECUs on different network segments of the vehicle network. This document defines various types of NIECUs. The information in this document applies only to ECUs that are intended to provide networking services. It is not necessary for an ECU to provide any of these services in order to be compliant with the SAE J1939 protocol.

Network Layer