T36 电子、电气设备 标准查询与下载

QC/T 1014-2015 汽车、摩托车起动电机用换向器

本标准规定了汽车、摩托车起动电机用换向器的要求、试验方法、检验规则、标志、包装、运输和储存。 本标准适用于汽车、摩托车起动电机用换向器（以下简称换向器）。

The starting motor commutator for automobile and motorcycle

QC/T 1015-2015 汽车空调控制器

本标准规定了汽车空调控制器（以下简称控制器）的要求、试验方法、检验规则、标志、包装、运输、储存和保管。 本标准适用于M、N类汽车空调系统控制器。其他机动车用空调控制器可参照执行。

Automotive air conditioner controller

BS ISO 8820-3:2015 公路车辆 熔断体 带突片的熔断体（刀片式） C 型（中型）、E 型（高电流）和 F 型（微型）

Road vehicles. Fuse-links. Fuse-links with tabs (blade type) Type C (medium), Type E (high current) and Type F (miniature)

BS ISO 15031-5:2015 公路车辆 车辆和外部设备之间的通信 用于排放相关的诊断 排放相关诊断服务

Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Emissions-related diagnostic services

BS ISO 15031-6:2015 公路车辆 车辆和外部设备之间的通信 用于排放相关的诊断 诊断障碍代码定义

Road vehicles. Communication between vehicle and external equipment for emissions-related diagnostics. Diagnostic trouble code definitions

ISO 15031-5:2015 道路车辆.排放相关诊断用车辆和外部设备之间的通信.第5部分:排放相关的诊断服务

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 5: Emissions-related diagnostic services

ISO 15031-6:2015 道路车辆.车辆与发射相关诊断用外部设备间的通信.第6部分:故障诊断编码定义

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions

ISO 10924-4:2015 道路车辆.断路器.第4部分:CB15式带有标签的中等断路器(刀片式)

This part of ISO 10924 specifies medium circuit breakers with tabs (Blade type), Form CB15, for use in road vehicles. It establishes, for this circuit breaker form, the rated current, test procedures, performance requirements and dimensions. This part of ISO 10924 is intended to be used in conjunction with ISO 10924-1 and with ISO 10924-2. The numbering of its clauses corresponds to that of ISO 10924-1, whose requirements are applicable, except where modified by requirements particular to this part of ISO 10924. This part of ISO 10924 is applicable to circuit breakers with a rated voltage of 14 V d.c. or 28 V d.c. or 58 V d.c., a current rating of no greater than 40 A and a breaking capacity of 2000 A, intended for use in road vehicles with a nominal voltage of 12 V d.c. or 24 V d.c. or 48 V d.c. Circuit breakers differ in terms of dimensions and functions, e.g. electrically reset, automatic reset, manual reset and switchable. NOTE This type of circuit breaker is intended to be used in applications such as medium fuse-links in accordance with ISO 8820-3. While the tab dimensions and current ratings can be the same, there might be differences in performance, which it is advisable that the user of these products take into consideration.

Road vehicles - Circuit breakers - Part 4: Medium circuit breakers with tabs (Blade type), Form CB15

BS ISO 10924-4:2015 道路车辆.断路器.CB15式带有标签的中等断路器(刀片式)

Road vehicles. Circuit breakers. Medium circuit breakers with tabs (Blade type), Form CB15

BS ISO 11452-1:2015 道路车辆. 用窄带发射的电磁能量进行电子干扰的部件试验方法. 通用原则和术语

Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. General principles and terminology

BS ISO 11452-8:2015 公路车辆 窄带辐射电磁能电气干扰的元件测试方法 抗磁场干扰

Road vehicles. Component test methods for electrical disturbances from narrowband radiated electromagnetic energy. Immunity to magnetic fields

BS ISO 11451-2:2015 道路车辆. 用窄带发射的电磁能量进行电子干扰的车辆试验方法. 非车载辐射源

Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. Off-vehicle radiation sources

BS ISO 11451-3:2015 公路车辆 窄带辐射电磁能电气干扰的车辆测试方法 板载发射机仿真

Road vehicles. Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy. On-board transmitter simulation

DIN EN 62196-1:2015 插头,电气插座,车辆连接器和车辆引入线.电动车导电充电.第1部分:通用要求(IEC 62196-1-2014,修正的);德文版本EN 62196-1-2014

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements (IEC 62196-1:2014, modified); German version EN 62196-1:2014

BS ISO 10924-3:2015 道路车辆. 断路器. 带突片的微型断路器 (叶片型), CB11式

Road vehicles. Circuit breakers. Miniature circuit breakers with tabs (Blade type), Form CB11

BS ISO 8820-10:2015 道路车辆 熔断体 带突片的熔断体 L类 （高电流微型）

Road vehicles. Fuse-links. Fuse-links with tabs Type L (high current miniature)

BS ISO 8820-5:2015 道路车辆.熔断体.SF 30和SF 51类型的带轴向引线的熔断体(带状熔断体)和试验装置

Road vehicles. Fuse-links. Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixture

NF C63-396-1*NF EN 62196-1:2015 插头、插座、车辆耦合器和车辆进气口.电动车辆的传导充电.第1部分:通用要求

Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1 : general requirements

ISO 8820-5:2015 道路车辆.熔断器.第5部分:SF 30和SF 51类型的带轴向引线的熔断器(带状熔断器)和试验装置

This part of ISO 8820 specifies fuse-links with axial terminals (Strip fuse-links) Type SF 30 and SF 51 and test fixtures for fuses in road vehicles. It establishes, for these fuse-link types, the rated current, test procedures, performance requirements, and dimensions. This part of ISO 8820 is applicable to fuse-links with a rated voltage of 32 V, a current rating of 30 A to 500 A, and a breaking capacity of 2000 A intended for use in the electrical system of road vehicles with a nominal voltage of 12 V and/or 24 V. This part of ISO 8820 is intended to be used in conjunction with ISO 8820-1 and with ISO 8820-2. The numbering of its Clauses corresponds to that of ISO 8820-1, whose requirements are applicable except where modified by requirements particular to this part of ISO 8820.

Road vehicles - Fuse-links - Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

BS EN 62196-1:2014 插头, 插座, 车辆连接器和车辆插孔. 电动车辆的传导充电. 一般要求

Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. General requirements