T61 拖拉机 标准查询与下载

KS B 7938-2003 农用拖拉机PTO动力传动轴摩擦离合器盘尺寸

이 규격은 농업용 트랙터용 PTO 동력 전달 축의 마찰식 클러치 디스크에 대하여 규정한

Dimensions of friction clutch discs for PTO drive shafts of agricultural tractors

VC 8057-2004 农用拖拉机

Covers the requirements for agricultural tractors that have a maximum design speed not exceeding 40 km/h, and that have not previously been registered in South Africa.

Agricultural tractors

KS B 7776-2003 农用拖拉机前部和中间部动力输出轴

This standard defines front and mid power take-off (hereafter 'take-off) of agricultural tractors (including lawn and garden tractor).

Agricultural tractors-Front and mid power take-off

CSA M5008-03-CAN/CSA-2003 农业轮式拖拉机和田间作业机械—驾驶员全身振动的测量 ISO 5008:2002

Agricultural wheeled tractors and field machinery Measurement of whole-body vibration of the operator Second Edition; ISO 5008: 2002

Tractors and agricultural equipment wheels Measuring the overall vibrations of the driver's body Second Edition; ISO 5008:2002

KS B 7905-2003 拖拉机液压阀

This standard describes the hydraulic valves(hereinafter shall be referred to as the "Valve") for agricultural tractors. However, valves of which operational pressure exceed 14MPa shall be exempted.

Hydraulic valves for tractors

CSA M5007-03-CAN/CSA-2003 农业轮式拖拉机—驾驶座—传递振动的试验室测量.第2版本.ISO 5007:2003

Agricultural Wheeled Tractors - Operator?s Seat - Laboratory Measurement of Transmitted Vibration Second Edition; ISO 5007:2003

Agricultural Wheeled Tractors - Operator磗 Seat - Laboratory Measurement of Transmitted Vibration Second Edition; ISO 5007:2003

KS B 7772-2002 手扶拖拉机联结器尺寸

이 규격은 보행형 트랙터(1)의 히치부의 주요 치수에 대하여 규정한다.

Dimensions of hitch for walking tractors

KS B 7801-2002 农用轮式拖拉机技术规范标准格式

이 규격은 농업용 차륜 트랙터(1)(이하 트랙터라 한다.)의 시방서(이하 시방서라 한다.)

Standard form of specifications of agricultural wheeled tractors

KS B 7803-2002 农用轮式拖拉机挂车机械连接装置主要尺寸

이 규격은 주로 농업용 차륜 트랙터에 사용하는 링크형 드로바(이하 드로바라 한다.)의 주요

Dimensions of link type draw bars for agricultural wheeled tractors

KS B 7770-2002 联合收割机旋转锯切刀

이 규격은 컴바인에 배열된 절단용 디스크형 커터의 회전칼 중 강제의 6각형 축 구멍을 가진

Chaff－Cutter saws of combines

KS B 7903-2002 农机用螺钉和螺母

이 규격은 농업 기계에 사용되는 6각 볼트 및 6각 너트(이하 볼트 및 너트라 한다.)의

Bolts and nuts for agricaltural machines and implements

KS B 7933-2002 农用拖拉机和机器.轮距

이 규격은 제조자의 지침으로서 농업용 트랙터와 기계의 차륜 거리를 규정한다. 이는 농업용

Agricultural tractors and machinery－Track widths

ANSI/ASAE/ISO 9190:2002 草地和园林用驾驶拖拉机.牵引杆

This International Standard specifies the dimensions and location requirements for drawbars on lawn and garden ride-on (riding) tractors. The requirements specified are essential to ensure that all types of towed implements, designed for operation in conjunction with lawn and garden tractors, can be operated with all currently manufactured types of lawn and garden tractors designed to pull such implements.

Lawn and Garden Ride-On (Riding) Tractors - Drawbar

ANSI/ASAE/ISO 9191:2002 草地和园林用驾驶拖拉机.三点悬挂装置

This International Standard specifies the requirements for the connection of implements or attachments to the rear of lawn and garden ride-on (riding) tractors by means of a three-point free link hitch in association with a power lift.

Lawn and Garden Ride-On (Riding) Tractors - Three-Point Hitch

KS B 7737-2001 农用拖拉机犁侧板尺寸

이 규격은 농업용 트랙터용 쟁기 중 삼각 보습을 가진 양용 쟁기의 바닥쇠에 대하여 규정한다

Dimensions of landside bottoms of two-way oriental plows for agricultural tractors

KS B ISO 3965:2001 农业轮式拖拉机.最大速度测定方法

이 규격은 차륜형 농업용 트랙터의 최대 설계 속도 계산 방법과 최대 주행 속도 측정 방법을

Agricultural wheeled tractors-Maximum speeds-Method of determination

CSA M3767-1-01-CAN/CSA-2001 拖拉机、农业和林业设备、动力花园和草坪设备 操作员控制符号和其他指示 第1部分：通用符号 第二版； ISO 3767-1:1998

This is the fourth edition of CSA N285.0, General requirements for pressure-retaining systems and components in CANDU nuclear power plants. It supersedes previous editions published in 1995, 1991, and 1981.

Tractors, Agricultural and Forestry Equipment, Powered Equipment for Gardens and Lawns - Symbols for Operator Controls and Other Indications - Part 1: Common Symbols Second Edition; ISO 3767-1:1998

ASME B30.14c Addenda-2001 带侧置起重臂的拖拉机.补充件

Side boom tractors; Addenda

KS B 7704-2000 拖拉机和联合收割机燃料过滤器元件的主要尺寸

이 규격은 농업용 트랙터 및 자탈형 콤바인에 사용되는 디젤 기관의 엘리먼트 교환형 연료여과

Dimensions of fuel filter elements for agricultural tractors and combine harvesters

JB/T 51082-2000 拖拉机产品可靠性考核（内部使用）

JB/T 51082-2000 本标准是对JB/T 51082.1~51082.3-1994《拖拉机产品可靠性考核》的修订与合并。 本标准规定了拖拉机产品可靠性考核的术语及定义，故障分析及判断规则，指标体系及评定办法和拖拉机可靠性使用试验方法等。 本标准适用于批量生产的拖拉机的可靠性考核评定，试制样机的可靠性考核也可参照执行。 本标准于1990年以JB/NQ 112.1~112.3-90首次发布，于1994年9月标准号调整为JB/T 51082.1~51082.3-94。

Tractor products - Reliability test (internal use)