U04 基础标准与通用方法 标准查询与下载
共找到 826 条与 基础标准与通用方法 相关的标准，共 56 页
本指导性技术文件规定了舰船建造工艺故障模式及影响分析(以下简称工艺FMEA)的准备与实施要求。本指导性技术文件适用于舰船建造过程中船体焊接、分段(总段)吊装、推进系统安装、管系加工与安装、舰船下水、武备安装等各类建造工艺故障模式及影响的分析。
Guide of process failure mode and effects analysis for ship building
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了水雷产品化学镀镍层的使用环境、要求及检验。本标准适用于水雷产品零部件化学镀镍层的选择、加工及检验。
The technology requirements about chemical nickel plating of mine-products
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了舰船用钛及钛合金焊接的材料、焊接工艺、焊接质量检验等要求。本标准适用于TA2、TA5、TC4、TA22、TA23、TA24等钛及钛合合金的焊接,其他α钛合金、α + β钛合金的焊接亦可参照使用。
Technical requirements of welding for titanium and titanium alloys used of naval ships
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了航空自导深弹水下弹道控制试验的一般要求、试验步骤、结果的分析与评定和试验报告等。本标准适用于航空自导深弹的水下弹道控制试验。
Test methods for trajectory control performance of aerial homing depth charge
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本规范规定舰船用绝缘陶瓷涂层(简称涂层)的要求、质量保证规定、交货准备等内容。本规范适用于绝缘陶瓷涂层设计、生产和检验。
Specification for insulate ceramic coating for naval
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了航空自导深弹自导特性试验的一般要求、试验步骤和结果的评定。本标准适用于航空自导深弹自导特性试验。
Testing methods for homing performance of aerial homing depth charge
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了水雷产品铝及铝合金硬质氧化膜层(以下简称氧化膜层)零部件氧化前要求、氧化膜层使用环境、要求及检验。本标准适用于水雷产品铝及铝合金零部件的硬质阳极氧化处理。
The technology reuirements about aluminium and aluminium-allay hard anodized membrance of mine-products
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本标准规定了常规炸药水下爆炸威力试验评估方法的一般要求、测试步骤和数据处理等。本标准适用于有限水域水下非接触爆炸时常规炸药的爆炸威力测量和评估。
Test evaluating method for the underwater explosion power of conventional explosives
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
本指导性技术文件规定了潜艇水下航速的测量目的、条件及方法。本指导性技术文件适用于常规潜艇及核潜艇水下航速的测量,也适用于潜艇艇载计程仪的校准。
Measurement Method for Underwater Speed of Submarine
- ICS
- CCS
- U04
- 发布
- 2013-01-04
- 实施
- 2013-05-01
Ships and marine technology-Marine environment protection-Terminology relating to oil spill response
- ICS
- 01.040.13;47.020.99;13.020.40
- CCS
- U04
- 发布
- 2013
- 实施
- 2013-05-15
이 표준은 선박 건조시 컴퓨터에 입력하는 자료 및 최종 자료 형식에 사용되는 용어에 대한
Principal ship dimensions－Terminology and definitions for computer applications
- ICS
- 01.040.47;47.020.01;35.240.50
- CCS
- U04
- 发布
- 2012-11-06
- 实施
- 2012-11-06
이 표준은 선박의 추진을 위한 가솔린 엔진, 전기 발전 또는 기계적 동력을 가지는 선체 길
Small craft－Ventilation of petrol engine and/or petrol tank compartments
- ICS
- 47.080
- CCS
- U04
- 发布
- 2012-11-01
- 实施
- 2012-11-01
Requirements for the use of shipyard safety signs
- ICS
- CCS
- U04
- 发布
- 2012-11-01
- 实施
- 2012-11-01
이 표준은 선주, 설계자, 조선소와 시운전 승무원에게 해상 시운전의 기획, 수행과 보고를
Instructions for planning, carrying out and reporting sea trials
- ICS
- 47.020.01;47.040
- CCS
- U04
- 发布
- 2012-10-30
- 实施
- 2012-10-30
이 표준은 국제표준화기구(ISO) 및 전 세계 8개의 조선 국가(중국, 독일, 인도, 일본
Maritime standards list
- ICS
- 47.020
- CCS
- U04
- 发布
- 2012-10-30
- 实施
- 2012-10-30
이 표준은 구명 뗏목과 비상 위치 지시용 무선 표지 설비(Emergency Position
Hydrostatic release units
- ICS
- 47.020.99;47.080
- CCS
- U04
- 发布
- 2012-10-30
- 实施
- 2012-10-30
Ships and marine technology - Graphical symbols for technical documentation - Part 10: Sensors and operating indicators; Text in German and English
- ICS
- 01.080.30;47.020.01
- CCS
- U04
- 发布
- 2012-10-01
- 实施
Ships and marine technology - Graphical symbols for technical documentation - Part 4: Sounding pipes, air pipes and filling pipes; Text in German and English
- ICS
- 01.080.30;47.020.30
- CCS
- U04
- 发布
- 2012-10-01
- 实施
This International Standard provides guidance to shipowners in the selection of a ship recycling facility. In order to ensure as far as possible that vessels are recycled in a safe and environmentally sound manner, shipowners need to consider to which ship recycling facilities they wish to sell their ships, and it is therefore important that ship recycling facilities provide certain objective information to assist in this selection process. Ship recycling facilities that are unwilling to provide this information on request by the shipowner cannot be objectively assessed. Since the shipowner might not be able to verify the information given, it is the sole responsibility of the ship recycling facilities to ensure that such information is correct. However, it is important that shipowners be critical in their consideration of any such information, and aware that some facilities might publish obviously false information or give contradictory data that make it apparent that the information supplied does not reflect reality. In such cases the facilities cannot be objectively assessed. It applies to the process of selecting a ship recycling facility and the use of a pro forma contract. It does not consider other aspects of ship recycling which are covered by other standards of the ISO 30000 series. This International Standard is applicable to shipowners who wish a) to select a ship recycling facility in order to carry out safe and environmentally sound ship recycling, b) to demonstrate conformity with the ISO 30000 series, and c) to ensure themselves that the ship recycling facility chosen is in conformity with the ISO 30000 series. This International Standard does not limit shipowners to selling to or recycling at facilities that have ISO 30000 certification.
Ships and marine technology - Ship recycling management systems - Guidelines for selection of ship recyclers (and pro forma contract)
- ICS
- 47.020.01
- CCS
- U04
- 发布
- 2012-06
- 实施
Ships and marine technology -- Vocabulary -- Deck machinery and outfittings
- ICS
- 01.040.47;47.020.50
- CCS
- U04
- 发布
- 2012-02-24
- 实施
