U18 小型船总体 标准查询与下载

NF J95-046-9:2012 小型船舶.船体结构和船材尺寸.第9部分:小帆船船体附属体

Small craft - Hull construction and scantlings - Part 9 : sailing craft appendages.

DIN EN 15609:2012 液化石油气(LPG)和附件.船只,游艇和其他小船用液化石油气(LPG)推进系统.安装要求.德文版本EN 15609-2012

LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft; German version EN 15609:2012

BS EN ISO 12215-9:2012 小型船舶.船体结构和船材尺寸.小帆船附件

Small craft. Hull construction and scantlings. Sailing craft appendages

DIN EN 16083:2012 游艇的船桨和桨.安全要求和试验方法.德文版本 EN 16083-2012

Paddles and oars for recreational boats - Safety requirements and test methods; German version EN 16083:2012

JIS F 1021:2012 小型船.人员落水的预防和救护

Small craft -- Man-overboard prevention and recovery

NF J95-003:2012 小船.一氧化碳(CO)探测系统

Small craft - Carbon monoxide (CO) detection systems.

BS EN 16083:2012 娱乐船艇桨或橹.安全要求和试验方法

Paddles and oars for recreational boats. Safety requirements and test methods

ANSI/ABYC P-23-2012 喷气快艇的驾驶和控制系统

This standard is a guide for the design and construction of systems for mechanical steering and mechanical control of propulsion machinery for inboard water-jet propelled boats.

Mechanical Steering and Propulsion Controls for Jet Boats

ANSI/ABYC H-29-2012 划艇和皮艇

This standard is a guide for determining capacities, flotation, powering, design, construction, and labeling of canoes and kayaks.

Canoes and Kayaks

ANSI/ABYC H-8-2012 覆没发生中的浮力

This standard is a guide for determining the flotation and placement required to keep boats afloat when flooded/swamped and where indicted, floating in an approximately level attitude when flooded/swamped.

Buoyancy in the Event of Swamping

ANSI/ABYC H-37-2012 喷水推进艇.轻量级

This standard is a guide for the design, construction, and maintenance of inboard water jet-propelled boats.

Jet Boats - Light Weight

ANSI/ABYC H-5-2012 小船容量

This standard is a guide for determining the maximum weight and persons capacity of boats.

Boat Load Capacity

ISO 12133:2011 小艇.一氧化碳(CO)检测系统

Small craft - Carbon monoxide (CO) detection systems

DIN EN ISO 11591:2011 发动机驱动小艇.掌舵位置视野(ISO11591:2011).德文版 EN ISO 11591-2011

Small craft, engine-driven - Field of vision from helm position (ISO 11591:2011); German version EN ISO 11591:2011

NF J95-059:2011 发动机驱动小艇.驾驶盘所在位置的视野.

Small craft, engine-driven - Field of vision from helm position.

DIN EN ISO 6185-4:2011 充气艇.第4部分:船体长度在8 m和24 m之间,电机额定功率为15 kW及以上的充气艇(ISO 6185-4-2011);德文版本EN ISO 6185-4-2011

This part of ISO 6185 specifies the minimum safety characteristics required for the design. materials, manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8m and 24m and with a motor power rating of 15 kW and greater.

Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011); German version EN ISO 6185-4:2011

BS EN ISO 11591:2011 机动小型船.掌舵位置的视野

Small craft, engine-driven. Field of vision from helm position

NF J37-825-4:2011 充气艇.第4部分:船体长度在8 m和24 m之间,电机额定功率为15 kW及以上的充气艇.

La présente partie de l'ISO 6185 spécifie les caractéristiques minimales de sécurité nécessaires pour la conception, les matériaux, la fabrication et les essais des bateaux pneumatiques semi-rigides (RIBs) ayant une longueur de coque comprise entre 8 m et 24 m et dont la puissance nominale est supérieure ou égale à 15 kW.La présente partie de l'ISO 6185 s'applique aux Types IX et X de bateaux pneumatiques semi-rigides destinés à être utilisés dans une plage de températures de service comprises entre -20 oC et +60 oC : Type IX: Bateaux à moteur équipés de chambres de flottabilité recouvrant au moins 85 % de ses cotés bâbord et tribord, appropriés à une navig

Inflatable boats - Part 4 : boats with an hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater.

ISO 11591:2011 机动小艇.操舵部位的视野

This International Standard specifies requirements for the field of vision from the helm position, forward and astern, in engine-driven small craft of up to 24 m length of hull. It is not applicable to: — tiller-steered craft (3.10) with maximum speed less than 10 knots; — sailing craft (3.11). NOTE Small engine driven craft can be operated in a manner and at certain speeds causing trim angles such that vision forward is temporarily obscured. This International Standard cannot assure that a craft can be operated without some temporary loss of vision from the helm position while operating at high trim angles during the transition from displacement to planing mode.

Small craft, engine-driven - Field of vision from helm position

BS EN ISO 6185-4:2011 充气艇.发动机额定功率为15 kW及以上,艇体长度为8-24 m的充气艇

This part of ISO 6185 specifies the minimum safety characteristics required for the design, materials, manufacture and testing of rigid inflatable boats (RIBs) with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater. This part of ISO 6185 is applicable to Type IX and Type X RIBs intended for use within the operating temperatures of −20 °C to +60 °C. ⎯ Type IX: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in inshore and sheltered waters, up to and including wind force 6 Beaufort and significant wave heights up to 2 m (design categories C and D), with a hull length of between 8 m and 24 m and with a motor power rating of 15 kW and greater. ⎯ Type X: Powered boats, fitted with a buoyancy tube covering at least 85 % of the port and starboard sides, suitable for navigation in waters, up to wind force 8 Beaufort and significant wave heights up to 4 m (design category B), with a hull length of between 8 m and 24 m and with a motor power rating of 75 kW and greater. NOTE 1 General arrangements of typical boats of Types IX and X are given in Annexes A and B, respectively. NOTE 2 For boats with power ratings of 4,5 kW and less, refer to ISO 6185-1. For boats with power ratings of 4,5 kW to 15 kW inclusive, refer to ISO 6185-2. For boats with a hull length of less than 8 m and power rating of 15 kW and greater, refer to ISO 6185-3. Boats outside these types or outside of Type IX and Type X, as defined, are outside of the scope of ISO 6185. NOTE 3 For inflatable boats with a hull length greater than 8 m, it is suggested to use the requirements of ISO 6185-3.

Inflatable boats. Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater