U18 小型船总体 标准查询与下载

KS V ISO 12217-1:2013 小型船舶.稳定性及浮力的评价及分类.第1部分:船体大于或等于6m的无帆小艇

이 표준은 비손상 보트의 복원력과 부력을 평가하는 방법에 대하여 규정한다. 물에 잠기기 쉬

Small craft－Stability and buoyancy assessment and categorization－Part 1：Non-sailing boats of hull length greater than or equal to 6 m

KS V ISO 15085:2013 小型船舶.人员落水的预防和救护

이 표준은 선외 추락의 위험을 최소화하기 위한 안전 장치와 배치의 구조, 강도 요건 및 설

Small craft－Man-overboard prevention and recovery

NF J95-058-3:2013 小型船舶.稳定性和浮性的评定与分类.第3部分:船体长度小于6 m的船只

Small craft - Stability and buoyancy assessment and categorization - Part 3: boats of hull length less than 6 m

NF J95-058-1:2013 小型船舶.稳定性和浮性的评定与分类.第1部分:船体长度不小于6 m的非帆艇

Small craft - Stability and buoyancy assessment and categorization - Part 1: non-sailing boats of hull length greater than or equal to 6 m

NF J95-058-2:2013 小型船舶 - 稳定性和浮性的评定与分类 - 第2部分: 船体长度不小于6 m的帆艇

Small craft - Stability and buoyancy assessment and categorization - Part 2: sailing boats of hull length greater than or equal to 6 m

BS EN ISO 12217-1:2013 小型船舶.稳定性和浮性的评定与分类.第1部分:船体长度不小于6 m的非帆艇

Small craft. Stability and buoyancy assessment and categorization. Non-sailing boats of hull length greater than or equal to 6 m

BS EN ISO 12217-2:2013 小型船舶.稳定性和浮力评估和分类.船体长度大于或等于6 m的帆船

Small craft. Stability and buoyancy assessment and categorization. Sailing boats of hull length greater than or equal to 6 m

BS EN ISO 12217-3:2013 小型船舶.稳定性和浮性的评定与分类.船体长度小于6 m的船只

Small craft. Stability and buoyancy assessment and categorization. Boats of hull length less than 6 m

EN ISO 12217-1:2013 小型船舶.稳定性和浮力评估与分类.第1部分:船体长度不小于6 m的非帆船

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation. This part of ISO 12217 excludes: — inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217; — personal watercraft covered by ISO 13590 and other similar powered craft; — gondolas and pedalos; — sailing surfboards; — surfboards, including powered surfboards; — hydrofoils and hovercraft when not operating in the displacement mode; and — submersibles. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m

EN ISO 12217-2:2013 小型船舶.稳定性和浮力评估和分类.第2部分:船体长度不小于6 m的帆船

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load. This part of ISO 12217 is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or may be applied if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation. This part of ISO 12217 excludes: — inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217; — gondolas and pedalos; — surfboards including sailing surfboards; and — hydrofoils and foil stabilized boats when not operating in the displacement mode. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m

EN ISO 12217-3:2013 小型船舶.稳定性和浮力评定与分类.第3部分:船体长度小于6 m的船只

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of craft vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (C or D) appropriate to its design and maximum load. This part of ISO 12217 is applicable to boats of hull length less than 6 m, whether propelled by human or mechanical power, except habitable sailing multihulls. Boats of hull length less than 6 m which are fitted with a full deck and quick-draining cockpit(s) complying with ISO 11812 may alternatively be assessed using ISO 12217-1 or ISO 12217-2 (for non-sailing and sailing boats, respectively), in which case higher design categories may be assigned. In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation. This part of ISO 12217 excludes: — inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217; — personal watercraft covered by ISO 13590 and other similar powered craft; — aquatic toys; — canoes and kayaks; — gondolas and pedalos; — sailing surfboards; — surfboards, including powered surfboards;— hydrofoils, foil stabilized boats and hovercraft when not operating in the displacement mode; and — submersibles. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m

ISO 12217-1:2013 小型船舶.稳定性和浮性的评定与分类.第1部分:船体长度不小于6 m的非帆艇

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to 24 m hull length. However, it can also be applied to boats of under 6 m if they do not attain the desired design category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812. In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation. This part of ISO 12217 excludes: — inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217; — personal watercraft covered by ISO 13590 and other similar powered craft; — gondolas and pedalos; — sailing surfboards; — surfboards, including powered surfboards; — hydrofoils and hovercraft when not operating in the displacement mode; and — submersibles. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m

ISO 12217-2:2013 小型船舶.稳定性和浮力评估和分类.第2部分:艇体长度不小于6 m的帆艇

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum load. This part of ISO 12217 is principally applicable to boats propelled primarily by sail (even if fitted with an auxiliary engine) of 6 m up to and including 24 m hull length. However, it can also be applied to boats less than 6 m if they are habitable multihulls or may be applied if they do not attain the desired design category specified in In relation to habitable multihulls, this part of ISO 12217 includes assessment of vulnerability to inversion, definition of viable means of escape and requirements for inverted flotation. This part of ISO 12217 excludes: — inflatable and rigid-inflatable boats covered by ISO 6185, except for references made in ISO 6185 to specific clauses of ISO 12217; — gondolas and pedalos; — surfboards including sailing surfboards; and — hydrofoils and foil stabilized boats when not operating in the displacement mode. NOTE Displacement mode means that the boat is only supported by hydrostatic forces. It does not include or evaluate the effects on stability of towing, fishing, dredging or lifting operations, which need to be separately considered if appropriate.

Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m

ISO 12217-3:2013 小型船舶.稳定性和浮性的评定与分类.第3部分:船体长度小于6 m的船只

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m

DIN EN ISO 21487:2013 小型船舶.永久性安装的汽油和柴油燃油箱(ISO/DIS 21487-2012).德文版本EN ISO 21487-2012

Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012); German version EN ISO 21487:2012

BS EN ISO 25197:2012 小型船舶.操舵、转换和节流用电子/电气控制系统

Small craft. Electrical/electronic control systems for steering, shift and throttle

KS V ISO 7840:2013 小型船舶.耐火燃油软管

이 표준은 선체길이 24 m 이하인 소형선박의 가솔린 및 디젤 연료를 공급하는 호스에 대해

Small craft-Fire-resistant fuel hoses

KS V ISO 8665:2013 小型船舶.船用主机和系统.功率测定和报告书

이 표준은 제조자에 의해 발간되는 공표(정격) 동력을 점검하고 문서화하기 위하여 제시되는

Small craft－Marine propulsion reciprocating internal combustion engines－Power measurements and declarations

KS V ISO 8849:2013 小型船舶.直流电动舱底泵

이 표준은 선체 길이가 24 m 이하인 소형선박으로부터 빌지를 제거하는 데 사용되는 직류

Small craft－Electrically operated direct-current bilge pumps

KS V ISO 12401:2013 小型船舶.甲板安全带及安全绳.安全条件及试验方法

이 표준은 유람선 갑판의 안전장구(harnesses) 및 안전줄(lines)에 대하여 성능

Small craft－Deck safety harness and safety line－Safety requirements and test methods