U18 小型船总体 标准查询与下载

DIN EN ISO 14509-3:2009 小艇.由机动游艇所发出空气噪声.第3部分:使用计算和测量规程评估噪声(ISO 14509-3:2009),德文版本 EN ISO 14509-3:2009

This part of ISO 14509 specifies the procedures for assessing sound emission of powered monohull recreational craft of length up to 24 m with a Froude number greater than 1,1. It is not applicable for personal watercraft (PWC). This part of ISO 14509 specifies the determination of the A-weighted sound pressure level by combining a calculation method and a measurement method.

Small craft - Airborne sound emitted by powered recreational craft - Part 3: Sound assessment using calculation and measurement procedures (ISO 14509-3:2009); English version of DIN EN ISO 14509-3:2009-11

DIN EN ISO 12217-3:2009 小艇的稳性和浮性的评定与分类.第3部分:艇体长度小于6m的艇(ISO 12217-3:2002 + 修改件1:2009),EN ISO 12217-3:2002 + A1:2009的德文版本

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (C or D) appropriate to its design and maximum load. This part of ISO 12217 is applicable to boats of hull length less than 6 m, whether propelled by human or mechanical power, except habitable sailing multihulls. Boats of hull length less than 6 m, which are fitted with a full deck and quick-draining cockpit(s) complying with ISO 11812 may alternatively be assessed using ISO 12217-1 or ISO 12217-2 (for non-sailing and sailing boats respectively), in which case higher design categories may be assigned.

Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002 + Amd 1:2009); German version EN ISO 12217-3:2002 + A1:2009

DIN EN ISO 12217-1:2009 小艇的稳定性,浮力评定和分类.第1部分:船身长度大于或等于6m的非航行艇(ISO 12217-1:2002 + 修改件1:2009),EN ISO 12217-1:2002 + A1:2009

This part of ISO 12217 specifies methods for evaluating the stability and buoyancy of intact (i.e. undamaged) boats. The flotation characteristics of boats vulnerable to swamping are also encompassed. The evaluation of stability and buoyancy properties using this part of ISO 12217 will enable the boat to be assigned to a design category (A, B, C or D) appropriate to its design and maximum total load. This part of ISO 12217 is principally applicable to boats propelled by human or mechanical power of 6 m up to and including 24 m hull length. However, it may also be applied to boats of under 6 m if they do not attain the desired desing category specified in ISO 12217-3 and they are decked and have quick-draining recesses which comply with ISO 11812.

Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002 + Amd 1:2009); German version EN ISO 12217-1:2002 + A1:2009

BS EN ISO 10088:2009 小型船.永久性装配的燃油系统

Small craft - Permanently installed fuel systems

DIN EN ISO 12215-8:2009 小型舰艇.船体构造和构件尺寸.第8部分:船舵(ISO 12215-8:2009),德语版EN ISO 12215-8:2009

This part of ISO 12215 gives requirements on the scantlings of rudders fitted to small craft with a length of hull, L, of up to 24 m, measured according to ISO 8666. It applies only to monohulls. This part of ISO 12215 does not give requirements on rudder characteristics required for proper steering capabilities. This part of ISO 12215 only considers pressure loads on the rudder due to craft manoeuvring. Loads on the rudder or its skeg, where fitted, induced by grounding or docking, where relevant, are out of scope and need to be considered separately. NOTE Scantlings derived from this part of ISO 12215 are primarily intended to apply to recreational craft including charter craft.

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009); English version of DIN EN ISO 12215-8:2009-10

DIN EN ISO 10862:2009 小型舰艇.挂架吊索快速释放系统(ISO 10862:2009),德文EN ISO 10862:2009

This International Standard specifies requirements and test methods for quick release devices as a component of the small sailing-craft trapeze system worn whilst afloat. The quick release device is intended to quickly release the wearer from entrapment and minimize the risk of drowning in the event of a failure to release from the sailing-craft trapeze system by other means. The quick release device is intended to be easily accessible and operated in all conditions that might occur whilst in use, including when a craft is capsized or inverted.

Small craft - Quick release system for trapeze harness (ISO 10862:2009); English version of DIN EN ISO 10862:2009-10

DIN EN ISO 15085:2009 小型舰艇.人员落水的预防和康复(ISO 15085:2003+修改件1:2009),德文版本EN ISO 15085:2003 + A1:2009

This International Standard specifies the design as well as the construction and strength requirements for safety devices and arrangements intended to minimize the risk of falling overboard, and requirements to facilitate reboarding. It describes means which can be used individually or combined to achieve these objectives, and applies to small craft of up to 24 m length of hull. This International Standard is not applicable to the following boat types: - aquatic toys; canoes, kayaks, or other boats with a beam less than 1,1 m; - personal watercraft, covered by ISO 13590; inflatable boats with a hull length of less than 8 m, covered by ISO 6185.

Small craft - Man-overboard prevention and recovery (ISO 15085:2003 + Amd 1:2009)(includes Amendment A1:2009); English version of DIN EN ISO 15085:2009-10

JIS F 7151:2009 小型船.耐火燃油软管

Small craft -- Fire-resistant fuel hoses

JIS F 7150:2009 小型船.非耐火燃油软管

Small craft -- Non-fire-resistant fuel hoses

SANS 14945:2009 小艇．制造者铭牌

Establishes requirements for the uniform display of information to be exhibited on the builder s plate of small craft with a hull length LH of up to 24 m.

Small craft - Builder's plate

SANS 21487:2009 小艇．永久性安装的汽油和柴油燃油罐

Establishes requirements for the design and testing of petrol and diesel fuel tanks for internal combustion engines that are intended to be permanently installed in small craft with hull length of up to 24 m.

Small craft - Permanently installed petrol and diesel fuel tanks

SANS 566:2009 小艇．液化石油气（LPG）系统

Covers permanently installed liquefied petroleum gas (LPG) systems and LPG burning appliances on small craft of hull length up to 24 m, except for systems used on LPG-fuelled propulsion engines or LPG-driven generators. Does not cover appliances with dir

Small craft - Liquefied petroleum gas (LPG) systems

SANS 12215-6:2009 小艇．船体结构和尺寸．第6部分：构造排列和详细资料

Applies to structural details of and structural components in monohull and multihull small craft constructed from fibre reinforced plastics (FRP), aluminium or steel alloys, wood or other suitable boat building material, with a hull length of up to 24 m.

Small craft - Hull construction and scantlings Part 6: Structural arrangements and details

ISO 10088:2009 小型船舶.永久性安装的燃料系统

Small craft - Permanently installed fuel systems

BS ISO 9650-3:2009 小型船舶.充气救生筏.材料

Small craft - Inflatable liferafts - Materials

SAE J1449-2009 小型船的图形符号

This SAE Recommended Practice defines graphic symbols for operator controls, gauges, tell-tales, indicators, instructions, and warning against risks in small craft and for engines and other equipment intended to be used in small craft.

Small Craft Graphic Symbols

NF J95-046-8:2009 小型船.船体构造和构件尺寸.第8部分:船舵

Small craft - Hull construction and scantlings - Part 8 : rudders.

ISO 12401:2009 小型船舶.甲板安全绳索和安全线.试验方法和安全性要求

This International Standard specifies the requirements for performance, sizing, marking and test methods for deck safety harnesses and safety lines on recreational craft. It is applicable to harnesses and lines in the following sizes of body mass: a) size 1: > 50 kg 1); b) size 2: > 20 kg u 50 kg 1); c) size 3: u 20 kg 1); which are intended to be worn by all persons when in the exposed cockpit or on the working deck of a craft afloat. It is not applicable to dinghy “trapeze” harnesses, windsurfing harnesses, seat harnesses for fast motor boats, and harnesses intended to protect against falls from a height.

Small craft - Deck safety harness and safety line - Safety requirements and test methods

BS EN ISO 12215-8:2009 小型船.船体构造和船材尺寸.第8部分:船舵(ISO 12215-8-2009)

This part of ISO 12215 gives requirements on the scantlings of rudders fitted to small craft with a length of hull, L, of up to 24 m, measured according to ISO 8666. It applies only to monohulls. This part of ISO 12215 does not give requirements on rudder characteristics required for proper steering capabilities. This part of ISO 12215 only considers pressure loads on the rudder due to craft manoeuvring. Loads on the rudder or its skeg, where fitted, induced by grounding or docking, where relevant, are out of scope and need to be considered separately.

Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009)

BS EN ISO 10862:2009 小型船舶.吊架装置快速断路系统(ISO 10862-2009)

This International Standard specifies requirements and test methods for quick release devices as a component of the small sailing-craft trapeze system worn whilst afloat. The quick release device is intended to quickly release the wearer from entrapment and minimize the risk of drowning in the event of a failure to release from the sailing-craft trapeze system by other means. The quick release device is intended to be easily accessible and operated in all conditions that might occur whilst in use, including when a craft is capsized or inverted.

Small craft - Quick release system for trapeze harness(ISO 10862:2009)