U44 船用内燃机 标准查询与下载

BS ISO 13363:2004 船用发动机排湿系统用橡胶和塑料软管.规范

This International Standard specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). The three types are: — type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement; — type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it; — type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage. The two classes are: — class A intended for diesel engines; — class B intended for petrol engines, and for diesel engines with a very high exhaust temperature.

Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification

HJB 291-2004 海军舰用PC2—5L系列柴油机修理技术要求

Repair Technical Requirements of PC2-5L Series Diesel Engines for Naval Ships

HJB 292-2004 海军舰用L20/27系列柴油机修理技术要求

Repair Technical Requirements of L20/27 Series Diesel Engines for Naval Ships

CB/T 709.2-2004 船用柴油机喷油嘴偶件技术条件

本标准规定了船用柴油机喷油器闭式喷油嘴偶件的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于中、大功率的高、中速船用柴油机喷油嘴偶件的制造和验收。

Specifications for fuel injector assembly of marine diesel engine

CB 1373.1-2004 舰船用柴油机研制技术要求 第1部分:部件认可准则

CB 1373 的本部分规定了舰艇用柴油机研制过程中对部件进行功能认可和批量生产认可的要求。 本部分适用于舰艇用中速、高速柴油机新设计或改进设计的部件的认可。

Specification of development and manufacture for naval diesel engine Part1:Aproving criterion of part

CB/T 709.1-2004 船用柴油机喷油器总成技术条件

本标准规定了船用柴油机闭式喷油器总成的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于中、大功率的高、中速船用柴油机喷油器的制造和验收。

Specifications of fuel injector assembly for marine diesel engine

CB 1373.2-2004 舰船用柴油机研制技术要求 第2部分:部件一致性保证

CB 1373 的本部分规定了舰艇用柴油机研制和生产过程中保证部件一致性的要求。 本部分适用于舰艇用中速、高速柴油机新设计或改进设计的部件的研制和生产。

Specification of development and manufacture for naval diesel engine Part2:Conformity guaranty of part

ISO 13363:2004 船用发动机湿排气系统用橡胶和塑料软管.规范

This International Standard specifies requirements for three types and two classes of hose. The hoses are intended for use in marine-engine wet-exhaust systems (where the exhaust gases are mixed with the discharge of cooling water). The three types are: — type 1: a softwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement; — type 2: a hardwall hose, made of oil-resistant material, with a synthetic-fabric reinforcement with a helical wire embedded in it; — type 3: a hose or tube (flexible connector), made of oil-resistant material, with or without a reinforcement or cover, intended for use in short lengths in locations where the connector is protected from mechanical damage. The two classes are: — class A intended for diesel engines; — class B intended for petrol engines, and for diesel engines with a very high exhaust temperature.

Rubber and plastics hoses for marine-engine wet-exhaust systems - Specification

JIS F 0407 ERRATUM 2:2003 JIS F0407 勘误表 2

ERRATUM

KS V 4332-2003 船舶用小型柴油机喷油器

이 규격은 선박용 소형 디젤 기관에 사용하는 연료 분사 노즐의 치수에 대하여 규정한다.

Fuel injector of marine small diesel engine

BS EN ISO 16147:2002+A1:2013 小型船舶.艇内柴油发动机.装在发动机上的燃料和电气元件

Small craft. Inboard diesel engines. Engine-mounted fuel and electrical components

CB/T 707.1-2002 船用柴油机喷油泵总成技术条件

Technical specification for fuel injection pump assembly of marine disel engines

CB/T 707.3-2002 船用柴油机喷油泵柱塞偶件技术条件

Technical specification for plunger mating parts of fuel injection pump of marine diesel engines

CB/T 707.2-2002 船用柴油机喷油泵出油阀偶件技术条件

本标准规定了船用柴油机柱塞式喷油泵出油阀偶件的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于中、大功率的高、中速船用柴油机出油阀偶件的设计、制造和验收。

Technical specification for delivery valve mating parts of fuel injection pump of marine diesel engines

JIS F 4301:2002 造船.推进用水冷却四冲程柴油发动机

この規格は，船の推進に用いる水冷4サイクルディーゼル機関(以下，機関という。)について規定する。電気推進用の発電機駆動用など，船の推進装置の動力源となる機関などにも，この規格を適用する。

Shipbuilding -- Water cooled four cycle diesel engines for propelling use

CB/T 3339-2001 船用柴油机排气消声器测量方法

本标准规定了船用柴油机排气消声器性能的测量要求和方法。 本标准适用于中大功率船用柴油机台架试验时对排气消声器的性能测量。

Measuring method for exhaust silencer of marine diesel engine

KS V 0424-2001 船舶用机械远程控制台内的配线与配管标准

? ??? ??? ???? ??? ?, ?? ??? ??, ?? ? ????? ???? ?

Internal wirings and pipings of engine control console

ISO 10088:2001 小艇 永久安装的燃油系统和固定式燃油柜

This International Standard specifies the requirements for the design, materials, construction, installation and testing of permanently installed fuel systems and fixed fuel tanks for internal combustion engines. It applies to all parts of permanently installed diesel and petrol fuel systems and fixed fuel tanks, from the fuel filling opening to the point of connection with the propulsion or auxiliary engine on inboard- and outboard-powered small craft of up to 24 m hull length.

Small craft - Permanently installed fuel systems and fixed fuel tanks

JIS F 7209:2001 造船.单联滤油器

この規格は，船の燃料油及び潤滑油関係に使用する単式油こし(以下，油こしという。)について規定する。

Shipbuilding -- Simplex oil strainers

JIS F 7208:2001 造船.双联滤油器(H型)

Shipbuilding -- Duplex oil strainers (H type)