U44 船用内燃机 标准查询与下载

KS V 7830-2005 海洋石油帽

이 규격은 선박에서 사용되는 오일 주유구 캡(이하 캡이라 한다.)에 대하여 규정한다.

Oil caps for marine use

KS V 7836-2005 船用离心式燃油和润滑油净化器

이 규격은 선박에 탑재되어 주기관 및 보조 기계에 공급되는 연료유와 윤활유를 정유하는 원심

Fuel oil and lubricating oil purifiers for marine use &##8211; Centrifugal type

KS V 7832-2005 船用柴油机排气管的装置

이 규격은 선박용 중형 디젤 기관의 배기 가스 배출을 위해 사용되는 배기관 장치(이하 배기

Exhaust piping systems for medium size marine diesel engines

KS V 7828-2005 船用柴油机的进气和排气气门导管

이 규격은 선박용 디젤 기관의 흡ㆍ배기 밸브 가이드(이하 가이드라 한다.)에 대하여 규정한

Guides of inlet valves and exhaust valves for marine diesel engines

CB 1384-2005 舰船用柴油机空气冷却器规范

本规范规定了舰船用柴油机空气冷却器（以下简称空冷器）的要求、质量保证规定和交货准备等。 本规范适用于水侧设计压力不大于0.5MPa、进口设计温度为32℃，空气侧设计压力不大于0.35MPa、设计温度不高于270℃，冷却介质为海水、被冷却介质为增压空气的空冷器的设计、制造和检验。

Specification for air cooler of ship diesel engines

KS V ISO 13342:2005 小型船舶.舷外机静推力测定

이 규격은 KS V ISO 11547에 따라 기어물림 상태에서 시동 방지가 요구되는지를 결

Small craft-Static thrust measurement for outboard motors

SAE J1191-2005 海上高张力点火电缆组件

This recommended practice covers the requirements for all Marine inboard and outboard gasoline ignition assemblies and components. To define components of ignition cable assemblies and establish accelerated aging, resistance to liquids and vapors, and dielectric requirements to assure the integrity of the system.

High Tension Ignition Cable Assemblies Marine

JT/T 4544-1993 船舶主柴油机遥控装置运行管理与维护技术要求

Technical requirements for operation management and maintenance of marine main diesel engine remote control device

ISO 18770:2005 船舶和航海技术.机炉舱燃油系统.燃油泄漏的预防

This International Standard specifies the measures to be taken to reduce fires originating from machinery-space flammable oil systems and to prevent leakage of flammable oil. It is intended for designers, shipyard personnel, engine-room personnel, owners, operators and maintenance personnel. Requirements contained herein address the design, construction, testing, installation, maintenance and inspection of systems containing flammable oil. This International Standard is applicable to new and existing vessels, and is intended to be used as a supplement to the regulations for fuel oil, lubricating oil and other flammable oils contained in the International Convention for the Safety of Life At Sea (SOLAS 74), as amended, issued by the International Maritime Organization (IMO).

Ships and marine technology - Machinery-space flammable oil systems - Prevention of leakage of flammable oil

HJB 312-2005 海军舰艇轻12—180型柴油机修理技术标准

Repair Technical Standards for Naval Vessel Light 12-180 Diesel Engines

HJB 310-2005 海军6300型柴油机修理技术标准

Maintenance Technical Standards for Navy Type 6300 Diesel Engines

KS V ISO 8314:2004 造船和海上建筑物.跨架轴承和导向滑块轴承的枢轴配件

이 규격은 선박의 데릭붐을 운전하는데 사용하는 스팬 베어링과 화물 미끄럼쇠(runner)

Trunnion pieces for span bearings and lead block bearings

KS V ISO 7824:2004 润滑油管嘴.锥型和扁平型

이 규격은 조선 및 해상 구조물용 유압 윤활유 니플의 형식과 그의 치수에 대하여 규정한

Lubrication nipples-Cone and flat types

HJB 297-2004 海军舰船350柴油机修理技术标准

Technical Standards for Naval Vessel 350 Diesel Engine Repair

HJB 306-2004 海军舰艇150型柴油机修理技术标准

Technical Standards for Repairing Type 150 Diesel Engines of Naval Vessels

HJB 304-2004 海军舰艇135型柴油机修理技术标准

Technical Standards for Repairing Type 135 Diesel Engines of Naval Vessels

HJB 303-2004 海军舰艇重180型柴油机修理技术标准

Technical Standards for Repairing Heavy Type 180 Diesel Engines of Naval Vessels

HJB 294-2004 海军舰用12VE230ZC型柴油机修理技术标准

Technical Standards for Repairing 12VE230ZC Diesel Engines Used in Navy Ships

HJB 295-2004 海军舰用8300ZC型柴油机修理技术标准

Repair Technical Standards of 8300ZC Diesel Engines for Navy Ships

HJB 305-2004 海军舰艇105型柴油机修理技术标准

Technical Standards for Repairing Type 105 Diesel Engines of Naval Vessels