V00 标准化、质量管理 标准查询与下载

ARINC 651-1 SUPP-1997 附录

Supplement

Supplement

ARINC 651-1 ITEM 10.0-1997 数据源和目的文件

Data Sources and Destinations

Data Sources and Destinations

HB 7291-1996 预研质量管理要求

本标准规定了预研过程质量管理的基本内容与要求。 　　本标准适用于承担国防科学技术预研任务的单位。其他研究任务可参照执行。应用本标准时，允许根据研究特点和实际情况进行剪裁。

Pre-research quality management requirements

ARINC 634 APP-1996 附录

Appendices

Appendices

ARMY ADS-50-PRF-1996 旋翼机推进性能.资格要求和指导原则

qualification requirements for rotorcraft propulsion systems. For the purposes of this ADS, propulsion systems includes engine and auxiliary power unit installations, start, fire detection/extinguishing, drive, fuel, environmental control, and hydraulic Systems.

ROTORCRAFT PROPULSION PERFORMANCE AND QUALIFICATION REQUIREMENTS AND GUIDELINES

MH/T 0014-1996 民用航空器维修与适航专业中高级技术资格评审条件

Requirements for Evaluating the Qualifications of Engineer and Senior Engineer in Civil Aircraft Maintenance and Airworthiness

ARINC 732-1-1996 Mark 2空中传播乘客娱乐录音磁带复制机包括附录1不适用于新发展而用于使用中的航空电子设备

Mark 2 Airborne Passenger Audio Entertainment Tape Reproducer Includes Supplement 1; Legacy - Not for use in new development but may apply to avionics in use

Mark 2 Airborne Passenger Audio Entertainment Tape Reproducer 1981; Includes Supplement 1

DOD MIL-PRF-89014 A-1996 中间地形数据(ITD)/中间地形数据规划(PITD)

This specification establishes the second edition Nlitary specification requirements for the Defense Mapping Agency's (DMA) Interim Terrain Data (ITD) andplanning InterhTerrainData (PITD).

INTERIM TERRAIN DATA (ITD)/PLANNING INTERIM TERRAIN DATA (PITD)

ARINC 602A-2-1996 测试设备指南1984包括附录1到2

Test Equipment Guidance, (TEG), 1984 (Includes Supplements 1 and 2)

Test Equipment Guidance, (TEG) 1984; Includes Supplements 1-2

ARINC 602A-2 BOOK-1996 测试设备指南1984包括附录1到2

Test Equipment Guidance, (TEG) 1984; Includes Supplements 1 and 2

Test Equipment Guidance, (TEG) 1984; Includes Supplements 1 and 2

SAE ARP1987/4-1996 标题，SAE 小组委员会 G-3A 航空航天耦合文件，选择

The scope of this SAE Aerospace Recommended Practice (ARP) is to establish the procedure for creating titles of aerospace coupling documents generated by SAE Subcommittee G-3A.

Titles, SAE Subcommittee G-3A Aerospace Coupling Documents, Selection of

SAE AS7104-1996 针对全部分销商认可的NADCAP要求

1.1 This Aerospace Standard (AS) establishes the minimum requirements for the quality assuranceprogram of a distributor of factory new material and excess inventory, assembled, altered, new, used,remanufactured, repaired, rebuilt or overhauled parts and materials. It is applicable to the distributorwho procures parts and materials, assembles higher level components/assemblies from parts or kits,or performs or contracts for the alteration, assembly, modification, remanufacture, repair, rebuilding oroverhaul of products and resells them to customers or other distributors (i.e., a VALUE ADDEDDISTRIBUTOR).1.2 For the purposes of this standard, a Value Added Distributor of new surplus material (new unusedparts produced by the OEM and purchased from an end user as surplus to their requirements) andexcess inventory shall.1.3 When required, the distributor shall perform or have performed the visual and/or dimensionalverification of products to applicable product standards, specifications or drawings using appropriatemeasuring instruments and gauges and attest to the purchaser as to the confirmation of productconformity. When required, the distributor shall have the capability to perform, or to have performed,functional (mechanical, electrical, electronic, electromechanical, etc.) testing and provide certified testreports to the purchaser.1.4 Distributors are subject to a quality program audit by the accrediting agency at any time during regularworking hours. Normally, the auditor will notify the distributor and arrange the audit so as to causeminimal interference with the distributor’s operations, but should circumstances dictate, the auditormay arrive unannounced.1.5 Any verified evidence of product or document alteration outside the scope of this standard may resultin loss of NADCAP accreditation. Such action will be pursued through the NADCAP due processprocedures.1.6 Conforming parts and materials are necessary to support compliance with applicable Federal AviationRegulations (FAR) which may include FAR 121.215, 121.303, 121.312, and/or 135.143 or JointAviation Regulations (JAR) as applicable.1.7 In those instances where this standard is used for distributors servicing the commercial/civil aviationsector, the requirements referencing “certified” or “authorized inspection personnel” are mandatory.1.8 This standard is compatible with the requirements of:a. ISO 9003 (1987) “Quality Systems - Model For Quality Assurance in Final Inspection and Test” orthe U.S. equivalent ANSI/ASQC Q93.b. C.A.S.E. Standard 3-A, (2/1/89) “Surplus Parts Dealer, Quality Program Requirements”.c. ATA Draft Specification 106 (4/1/93) “Sources and Approved Parts Qualification Guidelines”.d. MIL-I-45208 “Inspection Systems”.1.9 Compliance with this standard does not necessarily indicate that a distributor will be granted NADCAPaccreditation.1.10 PRI AC7104 (Rev. 2/1/94) is the audit criteria to be used with this standard.

NADCAP Requirements for Accreditation of Full Distributors

MH/T 0008-1995 民用航空行政机关、企事业单位（含社会团体）信息分类与代码

Classification and coding of information on civil aviation administrative agencies, enterprises and institutions (including social groups)

MH/T 7007.2-1995 民用航空飞行人员转机型、转专业体格检查鉴定标准

本标准推荐了飞行人员转机型、转专业的医学条件。 本标准适用于飞行人员转机型、转专业。

Appraisal standard of physical examination for airmen for type of aircraft transfer and occupation transfer of civil aviation

MH/T 7006-1995 民用航空空勤人员每日膳食中营养素供给标准

本标准规定了空勤人员每日膳食中热能、蛋白质、脂肪、维生素、无机盐与微量元素的供给量，并对膳食质量提出了相应要求。 本标准适用于从事民用航空飞行作业的空勤人员。

Standard of dietary nutrients allowance for civil aviation aircrew

MH/T 3001-1995 航空器无损检测人员技术资格鉴定规则

Rules for qualification and certification of NDT personnel in aircraft

MH/T 0004-1995 民用航空标准体系表

本标准规定了民用航空标准体系的结构、层次及标准明细表。它包括民航现有、应有和预计发展的标准。 本标准适用于民用航空行业，是编制标准制定修订规划和计划的依据。

Civil aviation Diagram of standard system

NAVY MIL-STD-2035 A-1995 非破坏性测试验收标准

This Military Standard is approved for use by the Naval Sea Systems Command, Department of the Navy, and is available for use by all Departments and Agencies of the Department of Defense.

NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA

HB 7129-1994 产品质量记录管理

本标准规定了产品质量记录的分类和管理要求。 　　本标准适用于航空产品的研制、生产、使用（服务）全过程。

Product Quality Record Management

SAE AS4270-1995 Mil-Std-1760 Mission Stores验证方法

This document establishes techniques for validating that a mission store comples with the interface requirements delineated in MIL-STD-1760. The purpose of this document is to provide methods for validating that an mission stores electrical interface comples with the mission store interface (MSI) requirements of MIL-STD-1760. This document provides a modular, independent set of methods for each of the requirements in MIL-STD-1760 that applies to mission stores. The methods herein apply to the auxiliary (AUX) interface as well as the primary interface of MIL-STD-1760

Validation Methods for Mil-Std-1760 Mission Stores