V04 基础标准与通用方法 标准查询与下载

SAE ARP5560-2008 指向导航空域的高强度光(HIL)的安全考虑

This document applies to regulatory/approving authorities involved with decisions regarding the use of HIL directed into the navigable airspace. For the purpose of this document, lights greater than 0.25 million candlepower meet the minimum threshold of an HIL. Lights not directed or reflected into the navigable airspace are not usually considered to interfere with aircraft operations. Laser systems are beyond the scope of this document. The purpose of this document is to provide guidance to regulatory/approving authorities on issues specific to the use of HIL directed or reflected into the navigable airspace.

Safety Considerations for High-Intensity Lights (HIL) Directed into the Navigable Airspace

GJB 6635-2008 目标与背景红外辐射特性机载下视测试方法

本标准规定了目标与背景红外辐射特性机载下视成像测量的目的、原理、内容、方法，以及对测量系统和设备的要求。 本标准适用于由机载平台上红外成像设备对地、海面目标与背景红外辐射特性的测量。

Measurement method for infrared radiation feature of target and background by means of airborne downward looking

GJB 6561-2008 航空重力测量作业规范

本标准规定了航空重力测量系统的构成、精度要求、仪器要求、仪器检验、载体飞机性能要求，还规定了航空重力测量作业的原则、要求、测线设计、数据处理等。 本标准适用于军事航空重力测量，也适用于其它为基础设施建设、资源调查和科学研究等实施的航空重力测量。

Rules for operations of airborne gravimetry

GJB 6544-2008 陆基巡航导弹通用规范

本规范规定了陆基巡航导弹（以下简称产品）的通用技术要求、质量保证规定和交货准备等。

General specification for land-launched cruise missile

QJ 3298-2008 航天产品数字化设计文件签署规定

Regulations on the Signing of Digital Design Documents for Aerospace Products

QJ 1028B-2008 航天产品常用坐标系

Commonly used coordinate systems for aerospace products

QJ 1380A-2008 整流罩铝蜂窝夹层结构件胶接成型工艺技术要求

本标准规定了整流单铝蜂窝夹层结构件的原材料及辅助材料、设备与工装、制造工艺、检验要 求、工艺过程中的质量控制及贮存与运输等要求。 本标准适用于不同规格的铝蜂窝芯材和不同结构高度的整流单铝蜂窝夹层结构的检验和验收。

Technical requirements for bonding molding process of fairing aluminum honeycomb sandwich structure

DIN EN 2424:2008 航空航天系列.航空航天产品的标记

This standard specifies the rules for the marking of aerospace products. It is applicable whenever referenced in the definition document of the product.

Aerospace series - Marking of aerospace products; German and English version EN 2424:2008

DIN EN 4408-003:2008 航空航天系列.工业制图.复合材料制部件的表示.第3部分:包括芯材的部件

This standard specifies the rules for the representation of parts including core materials as well as the information to be indicated in technical drawings. It applies to aerospace structures using core materials. It shall be used together with EN 4408-001.

Aerospace series - Technical drawings - Representation of parts made of composite materials - Part 3: Parts including core materials; German and English version EN 4408-003:2005

KS W ISO 1151-9:2008 飞行力学.概念、量和符号.第9部分:沿航空器轨迹的大气运动模型

KS W ISO 1511 시리즈의 이번 부에서는 항공기의 동적 거동에 영향을 미치는 대기운

Flight dynamics-Concepts, quantities and symbols-Part 9:Models of atmospheric motions along the trajectory of the aircraft

KS W ISO 1151-4:2008 飞行力学.概念、量和符号.第4部分:航空器稳定性和操纵研究的概念、量和符号

이 표준은 항공기의 안정성 및 조종성의 연구에서 사용되는 개념, 물리량 및 기호들을 다룬다

Flight dynamics-Concepts, quantities and symbols-Part 4:Concepts, quantities and symbols used in the study of aircraft stability and control

REG CAP 761-2008 英国IFF/SSR询问机操作:设计原则及程序

The increasing use of Identification Friend or Foe (IFF)/Secondary Surveillance Radar (SSR) systems for both civil and military applications has meant that there is a serious risk of mutual interference from the uncoordinated installation and operation of interrogators. If such installations are not carefully controlled, their operation could have potentially adverse implications for system integrity and hence flight safety. To minimise the risk and to secure optimum efficiency for secondary surveillance in its air defence, air traffic radar service and airspace management roles, it is necessary to exercise control over all interrogator installations regardless of whether they are static or mobile and operated on land, sea or in the air for whatever function.

Operation of IFF/SSR Interrogators in the UK: Planning Principles and Procedures

REG CAP783-2008 航班空服人员.批准飞行训练机构的初级安全训练指示和程序

1.1 The Safety Regulation Group (SRG) of the United Kingdom (UK) CAA regulates training of cabin crew who operate on UK registered aircraft. 1.2 Common, comprehensive and detailed requirements, known as EU-OPS, have been agreed by Member States of the European Community covering many requirements relating to the safety of commercial air transport aeroplanes. These requirements are published in the form of a European Regulation1 which has the force of law throughout the European Community including the UK. 1.3 One of these requirements, at 1.995 of EU-OPS, is for each cabin crew member to undergo initial training and to hold an attestation of that training. 1.4 EU-OPS states at 1.1005 that training courses leading to the deliverance of an attestation, and the organisations that conduct them, must be approved by the competent Authority of the Member State. (Airline operators will not require a separate approval since this approval forms part of the Air Operator’s Certificate.) For the UK the competent authority is the CAA. 1.5 This document contains guidance and information for the benefit of organisations seeking approval from the CAA. It is intended to serve two purposes: ? To help organisations ensure that an application made for an approval will satisfy the CAA that the relevant requirements and standards have been met and thereafter will continue to be met. ? To explain administrative arrangements in the UK. 1.6 The CAA expects organisations seeking approval to be in possession of the latest version of the relevant EU-OPS document(s) and all associated guidance material and the organisations’ representatives to be familiar with the content. 1.7 A Training Organisation (TO) is considered normally to be a single organisation, staffed, equipped and operated in a suitable environment, offering the practical training and theoretical instruction required for the course provided. 1.8 A TO may make training arrangements with other TOs or providers, but must ensure that these other organisations comply with the appropriate requirements. Where training is provided at multiple locations, all sites will be subject to inspection. The TO must be self-sufficient and able to test its trainees at the completion of each module of training. In all cases, the TO’s Head of Training is responsible for its training standards and compliance with appropriate requirements, including testing, even though a sub-contracted organisation may also be approved.

Cabin Crew – Initial Safety Training Instructions and Procedures for the Approval of Training Organisations

REG CAP 661-2008 特许飞行证中飞机操作用强制许可指示

Mandatory Permit Directives (MPDs) are published by the Civil Aviation Authority in accordance with British Civil Airworthiness Requirements (BCAR) Chapter A5-8. They summarise the mandatory actions that are required to be complied with by UK owners and Operators of Permit to Fly aircraft. Owners and Operators must ensure that aircraft operating on Permits to Fly comply with Modifications, Inspections and Service Bulletins that have been classified Mandatory by the CAA. These MPDs have been compiled from publications such as CAP 476 – Mandatory Aircraft Modifications and Inspections Summary, Type Acceptance Data Sheets, Type Approval Data Sheets, Airworthiness Approval Notes, Manufacturers Service Bulletins and Letters to Owners/Operators. The design standard of a microlight is defined in either a Type Acceptance Data Sheet for microlights meeting the intent of BCAR Section S or Type Approval Data Sheet for a microlight constructed by a CAA Approved Organisation. The MPDs for type accepted microlights make reference to the Type Acceptance Data Sheet whereas for type approved microlights the specific subject matter is listed. Enquires regarding MPDs should be made to the United Kingdom Civil Aviation Authority, AD Unit, Airworthiness Strategy and Policy Department, Safety Regulation Group, Aviation House, Gatwick Airport South, West Sussex RH6 0YR. Phone: +44 (0)1293 573150/3238 Fax: +44 (0)1293 573993 Email: ad.unit@caa.co.uk. Amendments to this document will usually be issued in January and July, incorporating all new and revised MPDs with updated Alphabetical and Numerical Indices. MPDs issued between these amendments are available at http://www.caa.co.uk/MPDS and the latest version of this CAP at www.caa.co.uk/CAP661.

Mandatory Permit Directives For Aircraft Operating on a Permit to Fly

REG CAP 611-2008 空运操作员执照:汽球操作

The purpose of this publication is to explain the administrative procedure for the issue, variation and renewal of Air Operators’ Certificates (Balloons) [AOC(B)] and to indicate the requirements to be met by applicants and certificate holders in respect of equipment, organisation, staffing, training and other matters affecting the operation of public transport balloons. Notes: 1) For the purpose of this publication the term Operator is used to describe both applicants and certificate holders. The certificate holder may be a registered corporate body, or a named individual or individuals with or without trading name(s). 2) For the purpose of this publication the use of the pronoun ‘he’ shall imply ‘she’ where appropriate.

Air Operators’ Certificates: Operation of Balloons

KS W ISO 1151-3:2008 飞行力学.概念、量和符号.第3部分:力、力矩及其系数的导数

이 표준은 힘 및 모멘트의 도함수, 힘 및 모멘트의 특성을 갖는 다른 물리량의 도함수들을

Flight dynamics-Cocepts, quantities and symbols-Part 3:Derivatives of forces, moments and their coefficients

SAE AIR5747-2008 无源射频识别(RFID)标签用EMC实验室RF辐射发射报告

This paper contains RF radiated emission and susceptibility data from passive Radio Frequency Identification (RFID) tags and readers operating at 13.56 MHz, 915 MHz, and 2.45 GHz. Laboratory test procedures incorporated the methods ofRTCA DO-160D (test procedures for aviation electrical/electronic equipment) and DO-233 (test procedures for consumer portable electronic devices (PEDs)). Only one commercially available system was evaluated per established operating frequencies.1.1 PurposeThe purpose of this paper is to record the RF radiated emissions and susceptibility from selected passive RFID systems operating at 13.56 MHz, 915 MHz, and 2.45 GHz. The emissions data (intentional and spurious) includes operation with both “good” and damaged tags. In addition, RF radiated susceptibility tests were performed to determine functionality and inadvertent operation.These tests are limited in scope to the RF radiated emissions of PEDs tested in a controlled laboratory environment per the requirements of RTCA DO-160D, RTCA DO-233, and an airplane manufacturer's limit.This paper:• identifies test units,• describes how the tests were conducted,• identifies support equipment and instrumentation,• includes test data, and• provides results.

EMC Laboratory RF Radiated Emission Report for Passive Radio Frequency Identification (RFID) Tags

KS W ISO 1151-8:2008 飞行力学.概念、量和符号.第8部分:用于航空器机动性研究的概念和量

이 표준에서는 여러 등급의 항공기 운동과 기본적인 동적 특성을 나타내는 개념 및 물리량에

Flight dynamics-Concepts, quantities and symbols-Part 8:Concepts and quantities used in the study of the dynamic behaviour of the aircraft

KS W ISO 1151-7:2008 飞行力学.概念、量和符号.第7部分:飞行点和飞行包线

이 표준에서는 비행 동역학 분야에서 항공기의 비행 조건 및 영역선도를 설명하기 위해 사용되

Flight dynamics-Concepts, quantities and symbols-Part 7:Flight points and flight envelopes

REG CAP 722-2008 英国领空上操作的无人航空器系统.指南

Unmanned Aircraft System Operations in UK Airspace – Guidance