V18 冷加工工艺 标准查询与下载

AECMA PREN 3346-1988 航空航天系列.铝合金(2014A)结构用的冷拉管0,6 mm小于或等于a小于或等于12,5

This ?Aerospace Series? pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de Matériel Aérospatial). It is published on green paper for the needs of AECMA-Members. ít has been technically approvedbythe experts of the concerned AECMA Commission following comment by the Member countries.

Aerospace Series Aluminium Alloy (2014A) Solution Treated, Straightened and Naturally Aged (T3) Tube for Structures 0,6 Less Than or Equal to a Less Than or Equal to 12,5 mm Issue P 1

AECMA PREN 2664-1988 航空航天系列Ni-C99HT 非热处理精密铸件.P1版

This standard describes the method used for the determination of the refractive index applicable for transparent materials used in aircraft glazing.

Aerospace Series Heat Resisting Nickel Base Alloy Ni-C99HT Not Heat Treated Precision Castings Issue P 1

AECMA PREN 3342-1988 航空航天系列.铝合金((6061)冷拉或挤压棒和型材a或直径D小于或等于150 mm

This standard specifies the characteristics of elbow, 90°in titanium alloy intended for use in aircraft fluid system pipe lines.

Aerospace Series Aluminium Alloy (6061) Solution Treated, Water Quenched and Aged (T4) Drawn Bar and Section 10 Less Than or Equal to (a or D) Less Than or Equal to 150 mm Issue P 1

AECMA PREN 3344-1988 航空航天系列.铝合金(7050)冷拉或挤压棒和型材a或直径D小于或等于150 mm

This ?Aerospace Series? pre-standard has been drawn up under the responsibility of AECMA (Association Européenne des Constructeurs de MatérielAérospatial). It is published on green paper for the needs of AECMA-Members. It has been technically approved by the experts of the concerned AECMA Commission following comment by the Member countries.

Aerospace Series Aluminium Alloy (7050) Solution Treated and Artificially Aged (T76511) Extruded Bars and Sections (a or D) Less Than or Equal to 130 mm with Peripheral Coarse Grain Control Issue P 1

NAVY MIL-H-29101 C-1988 用于极冷天气的防渗透头盔

This specification covers the requirements for two types of cold weather hoods which incorporate a waterproof barrier outer material of coated nylon twill and a knitted nylon fleece lining.

HOODS, EXTREME COLD WEATHER, IMPERMEABLE

DIN 9118-1:1987 航空航天.第1部分:铆钉孔

This standard specifies the recommended hole diameters for protruding head and countersunk head rivets.

Aerospace; rivet holes

NAVY MIL-M-87033 A-1987 极冷环境用手套

This specification covers the requirements for impermeable extreme cold weather mittens, consisting of a supported chloroprene dipped outer shell and a removable insulating liner fabricated of a bonded polyurethane film laminate nylon knit fabric and polyurethane foam ensemble.

MITTEN SET, EXTREME COLD WEATHER

ARMY MIL-C-83933 VALID NOTICE 1-1987 冷态喷浆防腐化合物(用于机动车辆) [用以替代:ARMY MIL-C-0083933 A CANC NOTICE 1]

MIL-C-83933 is still valid and will remain in the system until a Qualified Products List is established for MIL-C-62218B

CORROSION PREVENTIVE COMPOUND COLD-APPLICATION (FOR MOTOR VEHICLES) [Use In Lieu Of: ARMY MIL-C-0083933 A CANC NOTICE 1]

DIN 9003-5:1986 航空航天.轻金属薄板材和带材的弯曲.尺寸、极限偏差、补偿值

Aerospace; bending of light metal sheet and strip; dimensions, limit deviations and compensation values

HB 5362-1986 飞机常用金属防护层耐蚀性 质量检验

本标准规定了飞机常用金属防护层（锌镀层、镉镀层、装饰铬镀层和铝合金硫酸阳极氧化膜层、铬酸阳极氧化膜层、化学氧化膜层）的耐蚀性质量要求。

Quality Inspection of Corrosion Resistance of Commonly Used Metal Protective Layers of Aircraft

HB 5364-1986 WZL涂层质量检验

本标准规定了WZL涂料及WZL涂层Ⅰ—Ⅳ类的质量要求、验收规则和检验方法。 　　适用于本涂料的验收检验和在600℃以下工作的不锈钢、低合金钢、高强度等航空产品零（组）件涂覆本涂层的质量验收。

WZL coating quality inspection

AECMA PREN 2742-1986 航空和航天系列镁合金 Mg-C71-F软铸造

This standard specifies an anaerobic polymerisable compound which polymerises upon the exclusion of oxygen and activation by a metal surface with a torque strength of 10 Nm and thixotropic index of 3,5.

Aerospace Series Magnesium Alloy Mg-C71-F Sand Castings Issue P 1

AECMA PREN 2735-1986 航空和航天系列镁合金 Mg-C91-T5软铸造

This standard specifies a method of assessing the ability of a mated pair of optical connection elements and fibre optic couplers to withstand transverse loads without mechanical or optical damage.

Aerospace Series Magnesium Alloy Mg-C91-T5 Sand Castings Issue P 1

AECMA PREN 2734-1986 航空和航天系列镁合金 Mg-C81-T5冷硬铸造

After examination and signature of the AECMA Standard Checking Centre and formal agreement of the Official Services of the Member countries it will be published in its final version on yellow paper as an AECMA Sandard.

Aerospace Series Magnesium Alloy Mg-C81-T5 Chill Castings Issue P 1

AECMA PREN 2733-1986 航空和航天系列镁合金 Mg-C81-T5软铸造

This standard defines the characteristics of flat braided conductors copper tin or nickel plated for bonding straps according to EN 4199-001.

Aerospace Series Magnesium Alloy Mg-C81-T5 Sand Castings Issue P 1

AECMA PREN 2702-1986 航空和航天系列铝合金 6061-T6冷拉或挤压棒材与型材a或1,2mm小于或等于直径D小于或等于150mm

This standard is initially published on green paper for the needs of AECMA-Members (Association Europeenne des Constructeurs de Matdriel Adrospatial). it has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Aluminium Alloy 6061-T6 Extruded Bar and Section 1,2 Less Than or Equal to (a or D) Less Than or Equal to 150 mm Issue P 1

AECMA PREN 2732-1986 航空和航天系列镁合金Mg-C51-T6冷硬铸造

This standard is initially published on green paper for the needs of AECMA-Members (Association Européenne des Constructeurs de Matériel Aérospatial). It has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Magnesium Alloy Mg-C51-T6 Chill Castings Issue P 1

AECMA PREN 2739-1986 航空和航天系列镁合金Mg-C43-T5冷硬铸造

This standard is initially published on green paper for the needs of AECMA-Members (Association Europeenne des Constructeurs de Matdriel Adrospatial). it has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Magnesium Alloy Mg-C43-T5 Chill Castings Issue P 1

AECMA PREN 2738-1986 航空和航天系列镁合金 Mg-C43-T5软铸造

This standard is initially published on green paper for the needs of AECMA-Members (Association Europeenne des Constructeurs de Matdriel Adrospatial). it has been technically approved by the experts of the concerned AECMA Commission following comment by the manufacturers of the Member countries.

Aerospace Series Magnesium Alloy Mg-C43-T5 Sand Castings Issue P 1

AECMA PREN 2736-1986 航空和航天系列镁合金 Mg-C91-T5冷硬铸造

This standard is initially published on green paper for the needs of AECMA-Members.

Aerospace Series Magnesium Alloy Mg-C91-T5 Chill Castings Issue P 1