V51 客运 标准查询与下载

SAE ARP5585A-2011 非初始设备制造商对飞机座位约束系统部件的更换或改动

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This document outlines the evaluation and documentation appropriate when the components of an approved aircraft seat restraint system are replaced or modified by a party other than the Original Equipment Manufacturer of the restraint system.

Replacement or Modification of Components on Aircraft Seat Restraint Systems by Non-Original Equipment Manufacturers

MH/T 1037-2011 不正常航班旅客服务规范

本标准规定了在国内航空运输过程中发生航班不正常时对旅客提供服务的要求。 本标准适用于公共航空运输企业(承运人)及其代理人、机场管理机构等相关单位在航班不正常时的服务和管理。

Passenger service requirements for irregular flight

SAE AIR6448-2011 根据AC21-49选项7b获得批准的集成电路座椅

This document provides an industry recommended framework for establishing a multi-party agreement to support approval of electronic components (e.g., actuation system, reading light, inflatable restraint, IFE, etc.) integrated in aircraft seats and provide a framework that allows seat manufacturers to build and ship completed, integrated, and approved seat assemblies with electronics included. The primary purpose of this document is to provide roles, responsibilities and accountabilities to meet AC 21-49 Section 7.b 'Type Certification using TSO-approved seat with electronic components defined in TSO design'. This document may be applied to all applicable seat TSOs (C39(), C127()...etc). The approval for the integration of the electronics will fall, in part or in full, under the type design authority of the Seat Installer rather than the Seat Supplier shipping the integrated seat. The defined responsibilities, areas of authority and accountability of each party, as well as necessary communication protocols, must ensure configuration management, design control and quality control. These definitions, controls and protocols are agreed (thru normal commerical agreements and binding contracts) and adhered to by all parties ensuring all parts in the supply chain remain approved (e.g. certified and conformed). Table A1 of Appendix A of this document contains information which details the key characteristics of electronic equipment that require review to ensure proper compliance with the TSO requirements per Table 1 of AC 21-49.

Gaining Approval for Seats with Integrated Electronics in Accordance with AC21-49 Option 7b

SAE ARP5526C-2011 飞机座椅设计指南和澄清

This Aerospace Recommended Practice (ARP) documents a common understanding of terms, compliance issues and design criteria to facilitate certification of seat installations specific to Part 25 aircraft. This ARP provides general guidance for seats to be installed in Part 23 aircraft and Parts 27 and 29 rotorcraft and does not specify specific designs or design methods for such certification.

Aircraft Seat Design Guidance and Clarifications

MH/T 1034-2011 头等舱、公务舱旅客服务

本标准规定了民用航空运输过程中头等舱、公务舱旅客服务和设施设备配备的要求。 本标准适用于民用航空头等舱、公务舱旅客运输服务。

First/business class passenger service

MH/T 4029.1-2010 民用航空空中交通管制自动化系统 第1部分：配置

Civil Aviation Air Traffic Control Automation System Part 1: Configuration

DLA MIL-DTL-4710 E-2006 储存及运输弹药箱装置

This specification covers case sets (consisting of two cases) for shipment and storage of miscellaneous small parts.

CASE SET, TRANSPORT AND STORAGE

SANS 1534:2004 供与钢筋束基支架系统一起使用的座舱

Specifies the characteristics of resin capsules for use with tendon based support systems for the mining industry.

Resin capsules for use with tendon based support systems

ARMY MIL-DTL-44036 A-2003 锁紧器类型.云梯运输和货物拴住装置

This commercial item description covers brown kraft paper used for general wrapping applications.

TIEDOWN ASSEMBLY, CARGO, AERIAL DELIVERY, LOAD BINDER TYPE

ARMY MIL-STD-913 A VALID NOTICE 1-2002 防御直升机部外部运输的悬吊带装载军用设备的资格要求

MIL-STD-913A, dated 3 February1997, has been reviewed and determined to be valid for use in acquisition.

REQUIREMENTS FOR THE CERTIFICATION OF SLING LOADED MILITARY EQUIPMENT FOR EXTERNAL TRANSPORTATION BY DEPARTMENT OF DEFENSE HELICOPTERS

SAE ARP5497-2001 动态认证座位系统中部件的修改或更换

This document outlines the engineering evaluation appropriate for modifying or replacing components of a previously certified seat when the certification process is based on qualification to the requirements of AS8049, which includes dynamic testing. The engineering evaluation presented in this document may be used to determine if a modification (including replacement of a component) is a minor change with respect to meeting the dynamic testing requirements described in AS8049. Whenever a modification is considered, the ability to meet all requirements of the applicable Federal Aviation Regulation (FAR) must be verified. For example, this would include the capability to meet requirements such as flammability and flotation. Analysis and/or test data supporting the ability of the new materials and/or configuration to meet the applicable requirements must be submitted with the change documentation. This document addresses the evaluation of seat pan cushions, secondary components, and ancillary components. Other primary components such as restraint systems and primary structural components are not considered.

Modification or Replacement of Components on Dynamically Certified Seat Systems

DLA MIL-H-9890 E NOTICE 1-1997 混杂硬件单一货载运输设备

The General Services Administration has authorized the use of this commercial item description as a replacement for Military Specifications MIL-V-16720E and MIL-V-16721D which are cancelled.

HARDWARE, INDIVIDUAL LOAD CARRYING EQUIPMENT: AND HARDWARE, MISCELLANEOUS

ARMY MIL-STD-913 A-1997 防御直升机部外部运输的悬吊带装载军用设备的资格要求

This standard covers design, testing and performance requirements of military equipment for Helicopter Sling Loading(HSL) by Army, Navy, Marine Corps, and Coast Guard rotary wing aircraft.

REQUIREMENTS FOR THE CERTIFICATION OF SLING LOADED MILITARY EQUIPMENT FOR EXTERNAL TRANSPORTATION BY DEPARTMENT OF DEFENSE HELICOPTERS

SAE ARP4466-1997 民用运输飞机中儿童约束系统和乘客座椅系统的尺寸兼容性

This document provides guidance to promote dimensional compatibility between forward facing passenger seat systems in civil transport airplanes and child restraint systems developed primarily for use in automobiles.

Dimensional Compatibility of Child Restraint Systems and Passenger Seat Systems in Civil Transport Airplanes

ISO 10841:1996 航空器 大型飞机用餐饮服务车 功能要求

Specifies the functional, performance and safety requirements for a vehicle equipped with a liftable van body used for loading and unloading of catering equipment and supplies on all large capacity aircraft types in service in international civil air transport.

Aircraft - Catering vehicle for large capacity aircraft - Functional requirements

ARMY MIL-C-45987 A NOTICE 1-1995 M39型155MM榴弹炮运输器

This notice should be filed in front of MIL-C-45987A(AR), dated 22 October 1984

CARRIAGE, 155MM HOWITZER: M39

ARMY MIL-D-43703 C-1994 模塑聚乙烯运输和储存筒

This specification covers self supporting, molded polyethylene, tight head drums for surface and air shipnt of military supplies.

DRUM, SHIPPING AND STORAGE, MOLDED POLYETHYLENE

ARMY DOD-L-63317 A (2)-1993 多线程补充收费班轮运输

This amendment forms a part of Military Specification DOD-L-63317A(A R), dated 28 September 1981, and is approved for use by the U.S. Army ArmamentMunitions and Chemical Command and is available for use by all Departments and Agencies of the Department of Defense.

LINER, SUPPLEMENTARY CHARGE, THREADED

ARMY MIL-C-43528 A VALID NOTICE 1-1992 1000 LB/FT重力式滚轮运输机

MIGc-43528A(GL), daw 30 September 1985, has been reviewed and determined to be valid for use in acquisition.

CONVEYOR, ROLLER, GRAVITY, 1000 LB/FT

SAE AIR4496-1992 个人轮椅的安放位置

This SAE Aerospace Information Report (AIR) provides guidance criteria for the storage of personal wheelchairs in the passenger compartment of transport category aircraft, which have not been provided by the air carrier and are designated for the sole use of the passenger requiring such assistance.

Cabin Stowage of Personal Wheelchairs